WHQL討論區 公告
-
連結
By Joshua Baxter
Windows Server 2008 and Windows Server 2008 R2 migrated from mainstream support to extended support on 1/14/2015. Normally, Microsoft no longer accepts server system certification submissions for Windows Server 2008 and Windows Server 2008 R2 beyond that date. However, we have received feedback requesting an extension of the deadline to allow continued rollout of current generation server platforms (based on Haswell) with similar OS support to the servers that have already shipped. Based on this feedback, and effective immediately, we are extending the submission deadline as follows:
- Server system certification submissions will be accepted for Windows Server 2008 R2 through 8/31/2015
- This applies only to the scenario described above (current generation Haswell-based server rollout)
- Servers certified for Windows Server 2008 R2 will receive an automatic grant of the Windows Server 2008 Logo (unless otherwise requested by the partner)
- Server system certification submissions for Windows Server 2008 R2 will not be accepted after 8/31/2015
* Please note that driver and device certification requests may continue to be submitted through the end of extended support as normal (1/14/2020)
- Server system certification submissions will be accepted for Windows Server 2008 R2 through 8/31/2015
-
連結
http://msdn.microsoft.com/zh-tw/windows/hardware/jj874359
WLK 1.6 active errata extended into 2015
We have updated all active errata filters for the Windows Logo Kit (WLK) 1.6 test kit. All errata that were fixed in the kit were expired. All active errata that weren't fixed have been extended until December 1, 2015. (This extension date shouldn't be considered an indication of the kit's retirement date.)
You can check the status of all errata on the Hardware Dashboard. To narrow down the list, use the filters to view only active, expired, or expiring within 30 days. You can also search by ID and title.
Thanks, Steve
- 連結
-
連結
Errata expiration guidelines
We've updated all active errata filters for the Hardware Certification Kit (HCK) 2.0. All active errata that
weren't fixed in the test kit are now extended until 9/30/2013. We'll reevaluate
all active errata again about 3 months before the new expiration dates. We'll
either retire errata or extend the expiration date again, depending on whether
fixes are in place for the test issues. A few errata are set to expire between
now and 9/30 by design for delayed enforcement reasons or because fixes were
implemented into the next HCK release. Those errata won't be extended again.You can check the status of all errata anytime on the Hardware Dashboard. To narrow down the list, use the filters
to view only active, expired, or expiring within 30 days. You can also search by
ID and title.Thanks, Steve
-
連結
[Doc] Windows Hardware Certification Kit User's Guide
http://msdn.microsoft.com/en-us/library/windows/hardware/jj124227.aspx
Thanks, Steve
-
連結
Windows Logo Program Newsletter Archive
http://msdn.microsoft.com/zh-TW/windows/hardware/gg487488.aspx
-
連結
Certify Your Device by Using the Windows Hardware Certification Kit (HCK)
http://content5.catalog.video.msn.com/e2/ds/5845110e-b577-46d2-8c28-b83c79cd0af7.mp4
-
連結
If you still can not properly use the Signing use the certificate store, please refer to here.
http://www.oraxcel.com/cgi-bin/yabb2/YaBB.pl?num=1266417027
Thanks, Steve
-
連結
Merge .hckx packages
HCK Studio supports merging packages into one new package. This
feature gives you the flexibility to distribute your tests across different
projects, machine pools, and/or other HCK environments. Once each package is
successfully created, you can merge them using the Merge Package option.- From HCK Studio, click Connect.
- Select Package option, and then click Browse and open the one
of the existing .hckx package you want to merge.Note You must open an existing .hckx package to enable this scenario. The
original .hckx package will not get modified. - Select Package tab, click Merge Package.
- From the Open dialog, select an .hckx package you want to
merge.Note If you accidentally selected the wrong package, exit the project and start
over. You cannot cancel a merged file. - Repeat Steps 3 and 4 for each additional package you want to
merge. - Click Create Package.
-
0 投票
The redfish basic test on HLK failure. could we modify script?
If our BMC/IPMI do not support {"ResetType":"GracefulRestart"}, can we modify the content of Pester.Redfish.HLK.Tests.ps1 to ... -
0 投票
The BSOD happen when run "DF - Sleep and PNP (disable and enable) with IO Before and After with Driver Verifier Isolation"
Hi, As title, we found the Windows Server 2022 BSOD happen when execute the HLK "DF - Sleep and PNP (disable and enable) with IO Before and After with Driver Verifier ... -
0 投票
windows檔案被修改或刪除有紀錄嗎?
大家好, ...問題 | 1 回覆 | 144 檢視 | Created by jeff-huangch - 2023年1月31日 下午 12:48 | 最後回覆 : tihs - 2023年2月2日 上午 12:02 -
0 投票
Driver 測試簽章/ Release signing kernel mode driver for test
Signtool Error: The provided cross certificate would not be present in the certificate ... -
0 投票
HLK認證檔有效期限問題
公司在四月份的時候已經submit了windows 2022 server HLK report for RNDIS driver (上傳windows hardware dev ...問題 | 8 回覆 | 520 檢視 | Created by chen.chen1 - 2022年11月4日 上午 09:57 | 最後回覆 : chen.chen1 - 2022年12月19日 上午 01:23 -
0 投票
Static Tools Logo Test Fail
測試會出現下面訊息 DVL test failed, Microsoft.StaticToolsLogo.ObjectModel.DvlException: No DVL folder ... -
0 投票
HLK Directed fx system verification test fail
MyPoFxHandle); } void DirectedPowerDownCallback(PVOID Context, ULONG Flags) { PDEVICE_EXTENSION pdx = ... -
0 投票
DVL test failed, Microsoft.StaticToolsLogo.ObjectModel.DvlException: No DVL folder detected. Please place DVLs in C:\dvl or C:\data\test\bin\dvl on the target device
WHQL drvier failed,the failed item is static logo test.DVL test failed I type msbuild cmd for create SDV ...問題 | 1 回覆 | 675 檢視 | Created by WDMDriver2022 - 2022年3月8日 上午 03:21 | 最後回覆 : baotong.1.7 - 2022年11月3日 上午 09:20 -
0 投票
指紋廠商需要通過 Microsoft Security Review
有人知道什麼是 Microsoft Security Review 嗎? 我知道需要過HLK,但是PC ...問題 | 1 回覆 | 1000 檢視 | Created by Novice Driver Designer - 2017年5月2日 上午 02:43 | 最後回覆 : 121hzm - 2022年6月7日 上午 05:16 -
0 投票
請問要如何刪除從Hyper-V下載下來的映象檔?
我利用了Hyper-V快速建立下載了Windows ... -
0 投票
測試Win11發生的issue
DF - Sleep and PNP (disable and enable) with IO Before and After with Driver Verifier Isolation rules enabled (Development and Integration) DF - Sleep and PNP (disable ...問題 | 1 回覆 | 1951 檢視 | Created by kevin651212 - 2021年7月30日 上午 09:44 | 最後回覆 : 121hzm - 2022年3月9日 上午 06:22 -
0 投票
Windows 11 for USB4 Test Device == MUTT
請問系統測中在 Windows 11 有抓取到 "USB4 WinUSB ......" ...問題 | 2 回覆 | 1609 檢視 | Created by casper0814 - 2021年7月27日 上午 01:55 | 最後回覆 : ymc02233 - 2022年2月22日 上午 06:43 -
0 投票
How to test "xHCI Debug Capability Device Compliance" for USB 2.0
USB 2.0 Host Controller Debug Capable is no, how to test "xHCI Debug Capability Device Compliance"? setting AccessiblePorts to 0 to test?問題 | 1 回覆 | 434 檢視 | Created by borislin - 2022年1月20日 上午 06:03 | 最後回覆 : ymc02233 - 2022年2月21日 上午 03:38 -
0 投票
USB4 USB Implementers Forum (IF) certification test
想請問下如何通過"USB4 USB Implementers Forum (IF) certification test"這項測試 ...問題 | 1 回覆 | 401 檢視 | Created by 121hzm - 2022年2月15日 上午 05:54 | 最後回覆 : Weber Chang - 2022年2月17日 上午 10:52 -
2 投票
WHCK of Debug Capability Test
Does anyone can teach me about the "Debug Capability Test"? I have refer to microsoft document, but I can't run this test. Error message is show as ...問題 | 8 回覆 | 9065 檢視 | Created by Uenjiun - 2012年7月10日 上午 07:28 | 最後回覆 : borislin - 2022年2月11日 上午 08:42 -
0 投票
netvmini tcp not work
Hi, I use netvmini to develop hardware driver, ARP & Ping function works fine, but tcp could not handle syn/ack correctly Anybody can ... -
0 投票
Static tools logo test 怎麼測?
因為我在測試這項目時,出現在TestNetv2.1的目錄下找不到 CoreClr.dll, ...問題 | 1 回覆 | 1055 檢視 | Created by kevin651212 - 2021年10月12日 上午 08:32 | 最後回覆 : Jim_monkey - 2022年1月15日 上午 07:45 -
0 投票
[急問]請問WHQL驗證的Server端目前只承認到哪個版本?
想請問目前搭配Win11來說, Server端可搭2022嘛?還是目前只到2019? ...提議的解答 | 3 回覆 | 962 檢視 | Created by kevin651212 - 2021年11月15日 上午 06:31 | 最後回覆 : Weber Chang - 2021年11月22日 上午 10:48 - Items 1 to 20 of 4455 下一頁 ›
WHQL討論區 公告
-
連結
By Joshua Baxter
Windows Server 2008 and Windows Server 2008 R2 migrated from mainstream support to extended support on 1/14/2015. Normally, Microsoft no longer accepts server system certification submissions for Windows Server 2008 and Windows Server 2008 R2 beyond that date. However, we have received feedback requesting an extension of the deadline to allow continued rollout of current generation server platforms (based on Haswell) with similar OS support to the servers that have already shipped. Based on this feedback, and effective immediately, we are extending the submission deadline as follows:
- Server system certification submissions will be accepted for Windows Server 2008 R2 through 8/31/2015
- This applies only to the scenario described above (current generation Haswell-based server rollout)
- Servers certified for Windows Server 2008 R2 will receive an automatic grant of the Windows Server 2008 Logo (unless otherwise requested by the partner)
- Server system certification submissions for Windows Server 2008 R2 will not be accepted after 8/31/2015
* Please note that driver and device certification requests may continue to be submitted through the end of extended support as normal (1/14/2020)
- Server system certification submissions will be accepted for Windows Server 2008 R2 through 8/31/2015
-
連結
http://msdn.microsoft.com/zh-tw/windows/hardware/jj874359
WLK 1.6 active errata extended into 2015
We have updated all active errata filters for the Windows Logo Kit (WLK) 1.6 test kit. All errata that were fixed in the kit were expired. All active errata that weren't fixed have been extended until December 1, 2015. (This extension date shouldn't be considered an indication of the kit's retirement date.)
You can check the status of all errata on the Hardware Dashboard. To narrow down the list, use the filters to view only active, expired, or expiring within 30 days. You can also search by ID and title.
Thanks, Steve
- 連結
-
連結
Errata expiration guidelines
We've updated all active errata filters for the Hardware Certification Kit (HCK) 2.0. All active errata that
weren't fixed in the test kit are now extended until 9/30/2013. We'll reevaluate
all active errata again about 3 months before the new expiration dates. We'll
either retire errata or extend the expiration date again, depending on whether
fixes are in place for the test issues. A few errata are set to expire between
now and 9/30 by design for delayed enforcement reasons or because fixes were
implemented into the next HCK release. Those errata won't be extended again.You can check the status of all errata anytime on the Hardware Dashboard. To narrow down the list, use the filters
to view only active, expired, or expiring within 30 days. You can also search by
ID and title.Thanks, Steve
-
連結
[Doc] Windows Hardware Certification Kit User's Guide
http://msdn.microsoft.com/en-us/library/windows/hardware/jj124227.aspx
Thanks, Steve
-
連結
Windows Logo Program Newsletter Archive
http://msdn.microsoft.com/zh-TW/windows/hardware/gg487488.aspx
-
連結
Certify Your Device by Using the Windows Hardware Certification Kit (HCK)
http://content5.catalog.video.msn.com/e2/ds/5845110e-b577-46d2-8c28-b83c79cd0af7.mp4
-
連結
If you still can not properly use the Signing use the certificate store, please refer to here.
http://www.oraxcel.com/cgi-bin/yabb2/YaBB.pl?num=1266417027
Thanks, Steve
-
連結
Merge .hckx packages
HCK Studio supports merging packages into one new package. This
feature gives you the flexibility to distribute your tests across different
projects, machine pools, and/or other HCK environments. Once each package is
successfully created, you can merge them using the Merge Package option.- From HCK Studio, click Connect.
- Select Package option, and then click Browse and open the one
of the existing .hckx package you want to merge.Note You must open an existing .hckx package to enable this scenario. The
original .hckx package will not get modified. - Select Package tab, click Merge Package.
- From the Open dialog, select an .hckx package you want to
merge.Note If you accidentally selected the wrong package, exit the project and start
over. You cannot cancel a merged file. - Repeat Steps 3 and 4 for each additional package you want to
merge. - Click Create Package.