none
Failed test case: Verify Device Attributes for Device ID: SW\<GUID>\ASYNCMAC using WLK 1.5. RRS feed

  • 問題

  • Hello,

    I'm running an unclassified category testing on Windows 7 x64. using WLK 1.5
    Every testing is passed except the following test case.  
    Test Case Failed: Verify Device Attributes for Device ID: SW\{EEAB7790-C514-11D1-B42B-00805FC1270E}\ASYNCMAC

    It's weird that I'm pretty sure that I has been passed before.
    How can I troubleshooting with this case?

    thanks a lot.
    2010年3月15日 上午 08:41

解答

  • Hello

    I Believe  there  is an Errata  for that Test failure.

    Can you please  go to the  Device  console--- Select the Submission U have  created for the windows7 X64 machine.

    Click  on status ...... Now  U will have  report with all the  tests run... Passed ..Not run...Failed.....

    Click on the Report..... this should  show u whether  "Device  Install Check for other Device Stability" has been filtered with Errata.

    Revert back after this and let me know.

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com
    • 已標示為解答 Yen-Yu Chen 2010年3月16日 上午 02:50
    2010年3月15日 上午 09:53

所有回覆

  • Hello  Yenyu

    Can you please  let me know the  Test ?

    Is it in Driver Reliability or  USB_connectivity?

    Please  let me know the  Test Case  name?

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com
    2010年3月15日 上午 09:31
  • Hi Prashanth,

    Job Name: Driver Reliability\Device Install Check for Other Device Stability.
    Task Name: RunJob - Devuce Scan With Different mode.

    best regards,
    2010年3月15日 上午 09:47
  • Hello

    I Believe  there  is an Errata  for that Test failure.

    Can you please  go to the  Device  console--- Select the Submission U have  created for the windows7 X64 machine.

    Click  on status ...... Now  U will have  report with all the  tests run... Passed ..Not run...Failed.....

    Click on the Report..... this should  show u whether  "Device  Install Check for other Device Stability" has been filtered with Errata.

    Revert back after this and let me know.

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com
    • 已標示為解答 Yen-Yu Chen 2010年3月16日 上午 02:50
    2010年3月15日 上午 09:53
  • Hi Prashanth,

    I selected the submission I have created in device console, click on status and report buttons.

    I got following messages in red:
    Submission Status: This submission will fail and not reveive a Windows Logo because there are unresolved failures present.
    ...
    also some others in Failed Tests section:
    - Pass[155] Fail[1] -:|:- Device Install Check for Other Device Stability [ Infrastructure Logs ]
      - Pass[0] Fail[1] -:|:- RunJob - Device Scan With Different mode
          Pass[141] Fail[1] -:|:- Run Device Scan 
            ... DeviceScan.wtl 

    Where should I find the ["Device  Install Check for other Device Stability" has been filtered with Errata.] message.

    best regards,
    2010年3月16日 上午 01:48
  • OK, that was my fault.

    After UpdateFilter.cab was installed, I got the Submission Status in green.

    Thanks a lot.
    • 已標示為解答 Yen-Yu Chen 2010年3月16日 上午 02:51
    • 已取消標示為解答 Yen-Yu Chen 2010年3月16日 上午 03:25
    2010年3月16日 上午 02:50
  • That is Wat..............

    Congrats............

    Please approve  "propose my my answer"...

    Kind Regards
    Wintestlogo Team


    Wintestlogo Team email:Technical.team@wintestlogo.com
    2010年3月16日 上午 03:06
  • Hello Yenyu

    I need a favour from you.

    Can you please  write a Testmonial to us and send it our email id technical.team@wintestlogo.com

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com
    2010年3月16日 上午 03:07
  • OK,

    I have reset one of the answers.  

    (I was set both to whom it may concern)

    And I am writing the testmonial. thanks a lot.
    2010年3月16日 上午 03:33
  • Thanks  alot .....

    Look  forward  to Your  queries  on WHQL testing and assist  you.

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com
    2010年3月16日 上午 03:35
  • Hello

    I Believe  there  is an Errata  for that Test failure.

    Can you please  go to the  Device  console--- Select the Submission U have  created for the windows7 X64 machine.

    Click  on status ...... Now  U will have  report with all the  tests run... Passed ..Not run...Failed.....

    Click on the Report..... this should  show u whether  "Device  Install Check for other Device Stability" has been filtered with Errata.

    Revert back after this and let me know.

    Kind Regards
    Wintestlogo Team
    Wintestlogo Team email:Technical.team@wintestlogo.com


    Hi Wintestlogo Team,

    I have go to the Device console and select the submission I created for the windows 7 x86 machine, And click on status, I found the follow fail items,

    Context    
    Context Index:   1300697607
    Current:   Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&1&01
    Parent:   Device Install Check for Other Device Stability
    Start Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&1&01
    Message 8/3/2010 3:54:54.059 PM HTREE\ROOT\0 added newly
    Message 8/3/2010 3:54:54.059 PM Device Attribute Status DeviceName Smart card filter driver Description Smart card filter driver ProblemCode 0 Driver {db4f6ddd-9c0e-45e4-9597-78dbbad0f412} DriverName IsDisabled False IsFailedStart False IsFailedInstall False IsReinstallNeeded False IsStarted True
    End Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&1&01
    Result:   Fail

     

    Context    
    Context Index:   680584470
    Current:   Verify Device Attributes for Device ID:SW\{EEAB7790-C514-11D1-B42B-00805FC1270E}\ASYNCMAC
    Parent:   Device Install Check for Other Device Stability

    Start Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:SW\{EEAB7790-C514-11D1-B42B-00805FC1270E}\ASYNCMAC

    Message 8/3/2010 3:54:54.059 PM HTREE\ROOT\0 added newly

    Message 8/3/2010 3:54:54.059 PM Device Attribute Status DeviceName RAS Async Adapter Description RAS Async Adapter ProblemCode 0 Driver {4d36e972-e325-11ce-bfc1-08002be10318} DriverName AsyncMac IsDisabled False IsFailedStart False IsFailedInstall False IsReinstallNeeded False IsStarted True

    End Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:SW\{EEAB7790-C514-11D1-B42B-00805FC1270E}\ASYNCMAC
    Result:   Fail

    Context    
    Context Index:   4218418250
    Current:   Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&0&01
    Parent:   Device Install Check for Other Device Stability
    Start Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&0&01
    Message 8/3/2010 3:54:54.059 PM HTREE\ROOT\0 device has been removed
    Message 8/3/2010 3:54:54.059 PM Device Attribute Status DeviceName Smart card filter driver Description Smart card filter driver ProblemCode 0 Driver {db4f6ddd-9c0e-45e4-9597-78dbbad0f412} DriverName IsDisabled False IsFailedStart False IsFailedInstall False IsReinstallNeeded False IsStarted True
    End Test 8/3/2010 3:54:54.059 PM Verify Device Attributes for Device ID:{892EDE5E-BE49-443C-A0B3-005D74F2D69C}\SCFILTER\7&18C2F17D&0&01
    Result:   Fail

     

    By the way, I have install the QFE001 to QFE004 of the WLK 1_5,

     

     

    Allen

    2010年8月4日 上午 12:11
  • Try it again passed :(

    2010年8月4日 上午 10:33