none
[WLK1.6]Add job "IO Cancellation with Direct IO on network storage(preview)" failed on Win7 RRS feed

  • 問題

  • Hello,

    I meet a issue when i add job "IO Cancellation with Direct IO on network storage(preview)" on Win7 OS,The test driver is for USB data card device.

    the error message is "A job specifying the NetDeviceExtension UI was chosed for a device with class name ports. This is likely a problem with the job attributes as this extension should never be launched for the device with class other than Net, Modem or Infrared".

    Could anyone help? Thanks.

     

    2011年10月30日 上午 08:24

所有回覆

  • Hello,

     

    About the "IO Cancellation with Direct IO on network storage(preview)".

    If your test driver is for USB data card device.

    I think you should run it with choosing a Ethernet Adapter device only.

    Then it should be workable.


    Best Regards, Frost Tang
    2011年10月31日 上午 02:19
  • Hello Frost.Tang,

    Thanks for your answer.

    Actually, the test driver include Modem port, serial port, and NDIS port (Wireless Ethernet Adapter).

    when i add all the inf file to the new submission and create the job, then i will meet the issue of "IO Cancellation with Direct IO on network storage(preview)"

    And if i create the new submission and don't add the inf file for NDIS port in, then, the item "IO Cancellation with Direct IO on network storage(preview)" won't appear in the jobs list, so it is OK.

    I don't understand why the job cannot be added when NDIS port inf file added in.

    2011年10月31日 上午 03:36
  • Hello,

    I do understand that it includes modem, serial, and NDIS ports.

    I mean if you create a submission in Device Console page.

    There will be several devices under your Machine Pool, and several sub devices under each device. 

    You should choose the sub device as the "Ethernet Adapter" one.

    And run this Job in this way by each device under Machine Pool.

    Then it should be workable.


    Best Regards, Frost Tang
    2011年10月31日 上午 06:11
  • Hello Frost,

    I understand your meaning now, and i have tried the method you referred, but it remain failed.

    The job still can not be added in.

    Any other suggestion?

    Thanks.

     

    2011年10月31日 上午 07:33
  • Hello,

    You must have two machines with the same OS in the machine pool.

    Each machine should has a test device plug-in and installed driver successfully.

    There will pop-up a small windows when you add this Job.

    Then you can set it and start to run.

     

     

    The detail of setup please refer to this document:

    http://msdn.microsoft.com/en-us/library/ff564381(v=VS.85).aspx

     


    Best Regards, Frost Tang
    2011年10月31日 上午 10:22
  • Hello Frost,

    I have tried the method you referred, but it still cannot work on Win7.

    It is strange that the job didn't appear on Vista, although our driver for Vista and Win7 is almost the same.

    I have decided not add the NDIS inf file on Win7 , and finish all the test and submit the result to MS.

    After i got the NDIS cat file for Vista, then try it on Win7.

    Hope it can work.

    Thank you.

    2011年11月8日 上午 06:31