none
請教DTM1.6 要怎麼測? RRS feed

  • 問題

  • Dears,

    目前DTM1.6 已架設一陣子, 但測任何device 在USB item 很多項都會fail,連USB-IF test (ID 改為NA了)也不會pass,我有安裝filter 了,可是還是會fail;中繼hub 也改成VIA USB 3.0 hub,host 是用NEC 3.0 card...

    有好心人可以教一下該如何test ...

    感激不盡

    PS.之前DTM 1.5 都測的很好

    Iris

     

     

    2011年3月31日 上午 02:28

解答

  •  

    More information please refer http://msdn.microsoft.com/en-us/library/ff568637(v=VS.85).aspx

     

     

    USB-IF Test Certification ID Check

    Type: Automated Test

    Overview

    This test provides two options to validate USB-IF testing. If the device under test has been certified by the USB-IF, the Test Certification ID is sufficient to fulfill the USB-IF testing requirement. If the USB-IF tests have been downloaded from the USB-IF website at usb.org, a passing test log must be provided to validate completion of the test suite. For more information on how to fulfill the USB-IF testing requirement, visit the following Microsoft Web sitehttp://www.microsoft.com/whdc/connect/usb/WLK_USB-IF_CertReq.mspx

    Details

    Option 1: USB-IF Test Certification ID

    Use this option if the device under test is USB-IF Certified. The test collects the USB-IF test ID (TID) from the user at the time of scheduling the test as part of the editable parameters.

    To enter the USB-IF TID, follow these steps:

    1. In the Device Console, select USB-IF Test Certification ID Check from the Available Jobs list.

    2. Right-click the job and select Edit Parameters.

    3. Enter the Test ID, set INTEROP_TESTS_PASSED to TRUE, and then click OK.
    4. Schedule the job normally.

      This test ID will now be applied each time the test is scheduled for the submission.

    Option 2: USB-IF Self-Testing

    Use this option if the device is not USB-IF Certified.

    1. Download the most current version of the applicable USBCV test suite from the USB-IF’s website.

      For USB 2.0 devices, use the USB20CV tool available for download at http://www.usb.org/developers/tools/.

      For USB 3.0 devices, use the USB30CV tool available for download at http://www.usb.org/developers/ssusb/ssusbtools/.

    2. Install the tool kit and execute the applicable Chapter 9 tests on the device under test.

      Note  The term “Chapter 9” refers to the USB-IF tests, which are based on requirements derived from Chapter 9 of the USB specification.

      Note  Testing can be accomplished on any Windows 7 test system, and the results are valid for non-Windows 7 logo submissions.

    3. Run the appropriate interoperability tests for the device, as described in the WLK USB-IF Testing documentation available at http://www.microsoft.com/whdc/connect/usb/wlk-usb-if-testing.mspx.
    4. Locate the Chapter 9 test log on the test system.
    5. Copy the log file to the DTM client machine, if it is not the same as the test system.
    6. Create a folder on the DTM client called C:\usblogs and place the log file in that folder.

      Note  This is the default location the test will search for log files. The log may be placed anywhere on the system, but the PATH_TO_LOGS parameter must be updated to reflect the location of the log files.

    7. The WLK test will parse through the logs to determine whether the CV tests have passed or failed.
    8. For the interoperability testing, set the INTEROP_TESTS_PASSED parameter to “TRUE” if the Interop test was successful. Otherwise, keep the default value of “FALSE.”
    9. Schedule the job normally. The test will collect and parse the test logs from the client machine.

    Thanks,Steve


    Accept Chinese,English question in here.
    2011年5月27日 上午 07:07
    版主

所有回覆

  • 在選項上按右鍵把"FALSE"改成"TRUE"

    再試試吧

    Beck


    beck chen
    2011年3月31日 上午 03:47
  • Dear Beck,

    Thanks for your support!

    IF 是改ID 這個我知道喔~ 不過還是感謝你滴~

    Iris 

    2011年3月31日 上午 07:18
  • Dear Iriswmw:

                        您好,

                        請先參考 http://msdn.microsoft.com/en-us/library/bb961459.aspx ,看您安裝的電腦設備規格是否符合 Windows Logo Kit Installation Guide,特別是 Install Windows Server 2003 with Bb961459.internet_link_sm(en-us,MSDN.10).gifService Pack 2 (SP2) on the intended DTM Controller machine,HUB 可以延續使用 DTM 1.5 時候的,謝謝.

     

    Jason Huang


    Jason Huang
    2011年5月27日 上午 06:14
  •  

    More information please refer http://msdn.microsoft.com/en-us/library/ff568637(v=VS.85).aspx

     

     

    USB-IF Test Certification ID Check

    Type: Automated Test

    Overview

    This test provides two options to validate USB-IF testing. If the device under test has been certified by the USB-IF, the Test Certification ID is sufficient to fulfill the USB-IF testing requirement. If the USB-IF tests have been downloaded from the USB-IF website at usb.org, a passing test log must be provided to validate completion of the test suite. For more information on how to fulfill the USB-IF testing requirement, visit the following Microsoft Web sitehttp://www.microsoft.com/whdc/connect/usb/WLK_USB-IF_CertReq.mspx

    Details

    Option 1: USB-IF Test Certification ID

    Use this option if the device under test is USB-IF Certified. The test collects the USB-IF test ID (TID) from the user at the time of scheduling the test as part of the editable parameters.

    To enter the USB-IF TID, follow these steps:

    1. In the Device Console, select USB-IF Test Certification ID Check from the Available Jobs list.

    2. Right-click the job and select Edit Parameters.

    3. Enter the Test ID, set INTEROP_TESTS_PASSED to TRUE, and then click OK.
    4. Schedule the job normally.

      This test ID will now be applied each time the test is scheduled for the submission.

    Option 2: USB-IF Self-Testing

    Use this option if the device is not USB-IF Certified.

    1. Download the most current version of the applicable USBCV test suite from the USB-IF’s website.

      For USB 2.0 devices, use the USB20CV tool available for download at http://www.usb.org/developers/tools/.

      For USB 3.0 devices, use the USB30CV tool available for download at http://www.usb.org/developers/ssusb/ssusbtools/.

    2. Install the tool kit and execute the applicable Chapter 9 tests on the device under test.

      Note  The term “Chapter 9” refers to the USB-IF tests, which are based on requirements derived from Chapter 9 of the USB specification.

      Note  Testing can be accomplished on any Windows 7 test system, and the results are valid for non-Windows 7 logo submissions.

    3. Run the appropriate interoperability tests for the device, as described in the WLK USB-IF Testing documentation available at http://www.microsoft.com/whdc/connect/usb/wlk-usb-if-testing.mspx.
    4. Locate the Chapter 9 test log on the test system.
    5. Copy the log file to the DTM client machine, if it is not the same as the test system.
    6. Create a folder on the DTM client called C:\usblogs and place the log file in that folder.

      Note  This is the default location the test will search for log files. The log may be placed anywhere on the system, but the PATH_TO_LOGS parameter must be updated to reflect the location of the log files.

    7. The WLK test will parse through the logs to determine whether the CV tests have passed or failed.
    8. For the interoperability testing, set the INTEROP_TESTS_PASSED parameter to “TRUE” if the Interop test was successful. Otherwise, keep the default value of “FALSE.”
    9. Schedule the job normally. The test will collect and parse the test logs from the client machine.

    Thanks,Steve


    Accept Chinese,English question in here.
    2011年5月27日 上午 07:07
    版主