none
[QFE] QFE 10 Release (Build ID: 8.100.26795) RRS feed

  • 問題

  • QFE Update 010 (Build ID: 8.100.26795)

    Release date: June 10, 2014

    Optional or required: Optional

    Description of change:

    • SES Test (LOGO) – Removed the need for enclosures to support page 7 requests.
    • CiB Raid Controller Kit Tests – removed the requirement for more than 1 HBA.
    • Added a test to verify storage space.
    • Storage Performance CS – optimized for systems with less than 16 GB.
            

    QFE Update 009 (Build ID: 8.100.26699)

    Release date: May 13, 2014

    Optional or required: Optional

    Description of change:

    • Changed the following tests to no longer expose 720p and 480p as media types:

      • Camera Driver Basic Test - Capture Stream - Capture 30 seconds of 720p Video from Capture pin to H264 file (Video Only)
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio, Take Bitmap Photo
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio, Take JPEGXR Photo
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio, Take Bitmap Photo
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio, Take JPEG Photo
      • Camera Driver Basic Test - MultiStream (Scenario) - Preview, Record WMV9 Video and WMA9 Audio, Take JPEGXR Photo
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio, Take Bitmap Photo
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record H.264 Video and AAC Audio, Take JPEGXR Photo
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio, Take Bitmap Photo
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record VC1 Video and WMA9 Audio, Take JPEG Photo
      • Camera Driver Functional Test - MultiStream (Scenario) - Preview, Record WMV9 Video and WMA9 Audio, Take JPEGXR Photo
    • The following tests were made optional:

      • Camera Driver Basic Test - Capture Stream - Capture 30 seconds of 720p Video from Capture pin to H264 file (Video Only)
      • Camera Driver Basic Test - Capture Stream - Capture 30 seconds of 480p Video from Capture pin to H264 file (Video Only)
    • WLAN 802.11 Performance 2.4 GHz - the test skips the 40MHz channel width test if 40MHz is not supported.
    • WLAN 802.11 Performance 5 GHz - the test skips the 5GHz test if 5GHz is not supported.  Also, if 5GHz is supported and some of the channel widths are not supported then those tests will be skipped as well.
    • Print Driver Devmode Corruptor Test – fixed issue that prevented v4 drivers from switching to the correct port.
    • Print Driver Devmode Corruptor Test and PrintTicket Test – fixed issue that causes the tests to file if PrintSpy hangs.
    • Fixed an issue where controls were not skipped if it was not supported on the system. The following tests are skipped if the control is not supported:

      • Camera Driver Functional Test - PhotoSequence - Asyncronously turn on and off burst mode (return event)
      • Camera Driver Functional Test - PhotoSequence - Asyncronously turn on burst mode (return event)
      • Camera Driver Functional Test - PhotoSequence - Driver implements and respects the maximum frame rate control
      • Camera Driver Functional Test - PhotoSequence - Driver is able to return past frames (1)
      • Camera Driver Functional Test - PhotoSequence - Driver is able to return past frames (4)
      • Camera Driver Functional Test - PhotoSequence - Driver is able to return past frames (8)
      • Camera Driver Functional Test - PhotoSequence - Driver respects the advertised preview and capture frame rate and resolution
      • Camera Driver Functional Test - PhotoSequence - driver supports returning current doable  framerate
      • Camera Driver Functional Test - PhotoSequence - In Photo sequence mode, OS received multiple JPEG frames
      • Camera Driver Functional Test - PhotoSequence - Photo sequence operation can be run simultaneously with preview (multiple start and stop)
      • Camera Driver Functional Test - PhotoSequence - Thumbnail support for PhotoSequence frames
      • Camera Driver Functional Test - PhotoSequence -Uncompressed samples are supported
      • Camera Driver Functional Test - Webcam Controls - CameraAngleOffset - System Test
      • Camera Driver Functional Test - Webcam Controls - EvCompensation - System Test
      • Camera Driver Functional Test - Webcam Controls - Exposure - System Test
      • Camera Driver Functional Test - Webcam Controls - FieldOfView - System Test
      • Camera Driver Functional Test - Webcam Controls - FlashMode - System Test
      • Camera Driver Functional Test - Webcam Controls - FocusMode - System Test
      • Camera Driver Functional Test - Webcam Controls - ISO - System Test
      • Camera Driver Functional Test - Webcam Controls - OptimizationHint - System Test
      • Camera Driver Functional Test - Webcam Controls - Photo Sequence - System Test
      • Camera Driver Functional Test - Webcam Controls - ROI - System Test
      • Camera Driver Functional Test - Webcam Controls - SceneMode - System Test
      • Camera Driver Functional Test - Webcam Controls - TorchMode - System Test
      • Camera Driver Functional Test - Webcam Controls - Warm Start - System Test
      • Camera Driver Functional Test - Webcam Controls - WhiteBalance - System Test
    2014年6月11日 下午 09:45
    版主