none
WLK1.5-PCI Hardware Compliance Test For System RRS feed

  • 問題

  • Win7 X64 WLK1.5

    Filter: Last updated 2010-12-03

    PCI Hardware Compliance Test For System --> Fail 請各位先進協助.Thanks!

    Start Test

    12/1/2010 6:08:34.516 PM

    PCI Function @ 0.1.0

    Message

    12/1/2010 6:08:34.516 PM

    Testing PCI function at location 00000000.01.00

    Message

    12/1/2010 6:08:34.516 PM

    Found Vendor Specific Capability

     

    Message

    12/1/2010 6:08:34.516 PM

    Not found

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] Location = Bus: 00000000h, Device: 01h, Function: 0h

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] VendorID = 8086h: Intel Corporation

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] DeviceID = 0101h: <Not Found>

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] Revision = 8h

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] Header = 81h

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] ClassCode= 060400h

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] BaseClass= Bridge Device

     

    Message

    12/1/2010 6:08:34.516 PM

    [PROFILE] SubClass = PCI-to-PCI

    Error

    12/1/2010 6:08:34.517 PM

    Assertion 2895CD9C-4A24-4D84-8556-3345FEA560A0: FAILED. Bit range 3:0 (Maximum Link Speed)in the Link Capabilities register (offset Ch) in the PCI Express Capability table must be read-only .

    2010年12月3日 上午 02:42