none
USB HUB测试问题 RRS feed

  • 问题

  • 小弟在进行usb hub测试时,按照如下的步骤进行测试,但是测试一直pending 没有进行,会是什么原因啊

    我是在用USB 2.0 high-speed hub 接在Windows7 client上进行的.

    还有想请问一下做usb hub的测试需要schedule 哪些job 测试,万分感谢

    1. Go to the Device Manager of the client machine and make a note of the VID and PID of the device you would like to test.

      Note If you are not running a USB test, then this is probably not needed. Please check what other parameters are needed to run the test.

       

      Screen shot of the Device Manager dialog box with a device's VID circled

    2. Go to Explorers > Job Explorer and find the test that you would like to run.
    3. Right click on the job and select Schedule.

       

      Screen shot of the DTM Studio dialog box with the job highlighted and the Schedule command selected

    4. Enter the VID and PID of the device from step 1.
      Note If you are not running a USB test, then you may have to enter different parameters here. Also, there may be additional parameters that you want to change, such as the number of iterations on stress tests.

       

      Screen shot of the DTM Studio dialog box with the VID and PID values on the Jobs tab circled

    5. Select the client machine that you would like the test to run on.

       

      Screen shot of the DTM Studio dialog box, on the Machines tab, with the Browse box selected

    6. Select Create Schedule to run the job. The job will show up in the job monitor under the system that you selected...

     

    2010年6月4日 1:23

答案

  • 应该在Explorers > Device Console 中创建一个New submission,设备类型选USB HUB, 然后选择被测操作系统等信息。在Device Console中会列出需要测试的项目。

    所有这些项目都需要被测试。


    http://www.microsoft.com/china/whdc http://ctcwhql.spaces.live.com/blog/
    2010年6月4日 2:09
    版主

全部回复

  • 应该在Explorers > Device Console 中创建一个New submission,设备类型选USB HUB, 然后选择被测操作系统等信息。在Device Console中会列出需要测试的项目。

    所有这些项目都需要被测试。


    http://www.microsoft.com/china/whdc http://ctcwhql.spaces.live.com/blog/
    2010年6月4日 2:09
    版主
  • 谢谢

    2010年6月17日 1:34