none
关于logo viewer 3.0.0.0中Windows Logo Submission Status Report中Failure Information和Test Log Report中的一些信息不相符的问题 RRS feed

  • 问题

  • 大家好!我是刚学DTM的菜鸟,想请教下各位大侠一个问题。
    1、用logo viewer打开.cpk文件,直接弹出Windows Logo Submission Status Report,其中一个Failure Information如下:
    + Pass[1] Fail[1]  -:|:- Logo - S3 Resume time verification
     Pass[1] Fail[0]  -:|:- Run PwrTest.exe
    Log:  Present  [ pwrtest.wtl ]
     Pass[0] Fail[1]  -:|:- Parse pwrtestlog.xml
    Log:  Present  [ WScript.wtl ]
    Failure Information
    Issue DescriptionApplied Nodes
    -[Filter Number:1478 Row:345 ] - BIOS Initialization is over 1000ms. This is much too long.

    8 of 25
    Issue Resolution
    Typical BIOSInit times are less than 500ms. If the BIOSInit time on your system is much longer than 500ms and your system is failing the test because the total resume time is longer than 2000ms, contact your BIOS/firmware vendor for guidance and/or an update.
    Issue DescriptionApplied Nodes
    -[Filter Number:1127 Row:346 ] - Your system is failing to resume in time.

    15 of 25
    Issue Resolution
    Typical BIOSInit times are less than 500ms. Contact your BIOS/firmware vendor for guidance and/or an update. Never switch BIOS settings in the test system to remove SATA or AHCI controllers from boot scenarios to bypass this test. The system should be tested as it will be logod and sold.
    2、再打开在failed tests中该failed项的test detail查看其Test Log Report,结果如下:
    Report Details
    Complete Test Log
    
    Runtime 4-10-2009 8:26:08.198 下午  
    Runtime Index:   993600005
    Machine:   T11-PC
    Process Name:   C:\WTT\JobsWorkingDir\Tasks\WTTJobRun27EE25D1-015E-4001-A912-385C249720D6\WScript.exe
    Process ID:   196
    Thread ID:   3248
    Context    
    Context Index:   1708430188
    Current:   C98100E4-BF10-431e-B803-BD1292276285
    Parent:   WTTLOG
    Start Test 4-10-2009 8:26:08.198 下午 S3ResumeLogoTest
    Message 4-10-2009 8:26:08.198 下午 The PwrTestLog File Was Opened Successfuly: PWRTESTLOG.XML
    Message 4-10-2009 8:26:08.198 下午 PerfGetPowerCapabilities: Start to parse the SYSTEM_POWER_CAPABILITIES
    Message 4-10-2009 8:26:08.198 下午 PerfGetPowerCapabilities: S3Support: 1; RtcWakeSupport: 4
    Message 4-10-2009 8:26:08.198 下午 PerfGetPowerCapabilities: Succeed
    Message 4-10-2009 8:26:08.198 下午 PerfGetResumeTime: Start to parse the sleep scenarios
    Message 4-10-2009 8:26:08.198 下午 EffectiveState = 3
    Message 4-10-2009 8:26:08.198 下午 Bios Initialization Phase Time = 425
    Message 4-10-2009 8:26:08.198 下午 Driver Initialization Phase Time = 2554
    Message 4-10-2009 8:26:08.198 下午 Total Resume Time = 2979
    Assertion 4-10-2009 8:26:08.198 下午 The total resume time of this machine is longer than 2000ms
    File:   S3Resume.vbs Line: 349
    Message 4-10-2009 8:26:08.198 下午 EffectiveState = 3
    Message 4-10-2009 8:26:08.198 下午 Bios Initialization Phase Time = 425
    Message 4-10-2009 8:26:08.198 下午 Driver Initialization Phase Time = 2586
    Message 4-10-2009 8:26:08.198 下午 Total Resume Time = 3011
    Assertion 4-10-2009 8:26:08.198 下午 The total resume time of this machine is longer than 2000ms
    File:   S3Resume.vbs Line: 349
    Message 4-10-2009 8:26:08.198 下午 EffectiveState = 3
    Message 4-10-2009 8:26:08.198 下午 Bios Initialization Phase Time = 425
    Message 4-10-2009 8:26:08.198 下午 Driver Initialization Phase Time = 2554
    Message 4-10-2009 8:26:08.198 下午 Total Resume Time = 2979
    Assertion 4-10-2009 8:26:08.198 下午 The total resume time of this machine is longer than 2000ms
    File:   S3Resume.vbs Line: 349
    Message 4-10-2009 8:26:08.198 下午 PerfGetResumeTime: Failed
    End Test 4-10-2009 8:26:08.198 下午 S3ResumeLogoTest
    Result:   Fail
    Repro:   C:\WTT\JobsWorkingDir\Tasks\WTTJobRun27EE25D1-015E-4001-A912-385C249720D6\WScript.exe
    Pass/Fail Result Rollup Counts 4-10-2009 8:26:08.198 下午  
    Total:   1
    Passed:   0
    Failed:   1
    Blocked:   0
    Warned:   0
    Skipped:   0
    SecureLog    
    通过上述1和2,大家可以看到,1中BIOS的初始化时间超过1000ms导致failed的信息 和 2中BIOS的初始化时间425ms 不相符。
    虽然total时间超出2000ms结果都是failed,但大家也可以看到,一个是BIOS的问题,另一个是Driver的问题,导致我们解决问题上的一些不便。
    麻烦各位大家多给意见,Thanks!
    2009年4月17日 13:23

答案