none
新手求手机modem测试的详细硬件环境设置 RRS feed

  • 问题

  • 小弟刚接手Modem测试,与一般的有所不同,我的是用手机连接上PC,然后手机当Modem使PC上网。
    目前手上有三台电脑,一台是安装了英文server 2003的controller,另外两台client,一台xp32,一台Vista32.
    关于DTM测试的一般环境搭建我已经有所了解,现在想知道,我这种Modem测试该如何设置两台client,在它们上面需要连接哪些设备。
    请版主大人和各位高手赐教。

    2009年9月16日 1:34

答案

  • Driver Test Manager
    Modem Testing Overview

    The procedures that are presented in this section outline the process for testing your modem device for correct functionality with the Microsoft Windows operating system. These procedures use the Microsoft Windows Driver Kit (WDK) and Driver Test Manager (DTM). To ensure full functionality, you must run all of the tests that DTM identifies as required for the device.

    Note  You must use the latest version of the WDK to compile your driver in order for it to pass testing and obtain a logo.

    The test procedures in this section are divided into the following types of topics:

    • Overview: The overview topics describe the hardware, software, and tester knowledge requirements.
    • Preparing: The preparing topics describe how to configure the system or systems for "Designed for Windows" logo testing.
    • Running: The running topics describe how to run the tests for your device or system.
    • Troubleshooting: The troubleshooting topics describe how to diagnose and fix common problems that you might encounter during modem testing.

    Modem Device Tests

    The tests that you need to run depend on the capabilities of the device or system that you are testing. To see the complete list of tests that you might need for your device, see Modem Device Tests.

    Run time: 12 hours

    Note  Testing a device to obtain a logo for Server Device qualification requires that the system being used to test the device supports four processors and a minimum of 1 GB of RAM. These system capabilities are required for the "Dynamic Partitioning (DP) Simulator and Test" and the "Multiple Processor Group" test to run. You do not need a system that actually supports DP capabilities or has greater than 64 processors to test your device.

    If a pool of systems is used to test devices, at least one system in the pool must contain four processors and a minimum of 1 GB of RAM. Additionally, that system must contain the device and driver being tested. As long as the driver is the same on all systems in the pool, the schedule will be created to run against all systems.

    For those tests that do not include a driver to test, such as testing a hard drive, the Driver Test Manager (DTM) scheduler will constrain the DP test to run on the default system. This system should also be manually configured to have multiple processor groups. The default system is the first one listed. Test personnel, in this case, should ensure that this first system meets these minimum hardware requirements.

    DTM Setup for Modem Device Testing

    A DTM setup for modem device testing consists of a DTM controller, DTM Studio, and DTM clients. The following figure shows the relationship between these three parts.

    Note  DTM Studio and the DTM controller can be running on one computer to reduce the cost of the setup.

    Bb961484.Modem_DTMSetup(en-us,MSDN.10).png

    You can use DTM Studio to schedule the modem device test jobs on the DTM clients that are registered on the DTM controller. The following steps summarize the scheduling procedure:

    1. Enter all of the information that the modem device test job needs into DTM Studio, and schedule the job.

      The modem device test job requires two DTM client machines. For logo submission, you must have the test modem and a supporting ISDN or analog modem. These requirements are enforced when you configure the DTM job.

    2. DTM Studio sends job configuration information to the DTM controller, which reserves the DTM clients and dispatches the job to them.
    3. The DTM clients run the job. They first copy NDISTest, which is the actual modem device test tool, to the DTM clients and run NDISTest on the desktop of the current user.
    4. After the tests are finished, the log files are gathered on the DTM controller. You can view the log files or package them for submission.

    This section includes:

    2009年9月17日 3:11
    版主

全部回复

  • Driver Test Manager
    Modem Testing Overview

    The procedures that are presented in this section outline the process for testing your modem device for correct functionality with the Microsoft Windows operating system. These procedures use the Microsoft Windows Driver Kit (WDK) and Driver Test Manager (DTM). To ensure full functionality, you must run all of the tests that DTM identifies as required for the device.

    Note  You must use the latest version of the WDK to compile your driver in order for it to pass testing and obtain a logo.

    The test procedures in this section are divided into the following types of topics:

    • Overview: The overview topics describe the hardware, software, and tester knowledge requirements.
    • Preparing: The preparing topics describe how to configure the system or systems for "Designed for Windows" logo testing.
    • Running: The running topics describe how to run the tests for your device or system.
    • Troubleshooting: The troubleshooting topics describe how to diagnose and fix common problems that you might encounter during modem testing.

    Modem Device Tests

    The tests that you need to run depend on the capabilities of the device or system that you are testing. To see the complete list of tests that you might need for your device, see Modem Device Tests.

    Run time: 12 hours

    Note  Testing a device to obtain a logo for Server Device qualification requires that the system being used to test the device supports four processors and a minimum of 1 GB of RAM. These system capabilities are required for the "Dynamic Partitioning (DP) Simulator and Test" and the "Multiple Processor Group" test to run. You do not need a system that actually supports DP capabilities or has greater than 64 processors to test your device.

    If a pool of systems is used to test devices, at least one system in the pool must contain four processors and a minimum of 1 GB of RAM. Additionally, that system must contain the device and driver being tested. As long as the driver is the same on all systems in the pool, the schedule will be created to run against all systems.

    For those tests that do not include a driver to test, such as testing a hard drive, the Driver Test Manager (DTM) scheduler will constrain the DP test to run on the default system. This system should also be manually configured to have multiple processor groups. The default system is the first one listed. Test personnel, in this case, should ensure that this first system meets these minimum hardware requirements.

    DTM Setup for Modem Device Testing

    A DTM setup for modem device testing consists of a DTM controller, DTM Studio, and DTM clients. The following figure shows the relationship between these three parts.

    Note  DTM Studio and the DTM controller can be running on one computer to reduce the cost of the setup.

    Bb961484.Modem_DTMSetup(en-us,MSDN.10).png

    You can use DTM Studio to schedule the modem device test jobs on the DTM clients that are registered on the DTM controller. The following steps summarize the scheduling procedure:

    1. Enter all of the information that the modem device test job needs into DTM Studio, and schedule the job.

      The modem device test job requires two DTM client machines. For logo submission, you must have the test modem and a supporting ISDN or analog modem. These requirements are enforced when you configure the DTM job.

    2. DTM Studio sends job configuration information to the DTM controller, which reserves the DTM clients and dispatches the job to them.
    3. The DTM clients run the job. They first copy NDISTest, which is the actual modem device test tool, to the DTM clients and run NDISTest on the desktop of the current user.
    4. After the tests are finished, the log files are gathered on the DTM controller. You can view the log files or package them for submission.

    This section includes:

    2009年9月17日 3:11
    版主
  • 上面的兄弟不要复制MSDN网站的内容,谢谢。

    2009年9月17日 6:21
  • 不要复制MSDN网站内容  贴出网址就行
    擅长领域 Windows Desktop Experience, Media Center, Virtual Machine, Windows System & Performance
    2009年9月21日 0:26