请问各位测试USB键盘的问题?

Question

1，请问我测试无需驱动的USB键盘(上面有几个普通的多媒体键：如前进、后退、播放、停止、电源关机键)，我接在PCI转USB卡的接口上测试，但测试结果有几项无法通过，日志结果如下：

Submission Type	Category	Sub Category	Operating System	Platform	Qualification
Device	Device Logo	Input > Keyboard	Windows 7 Client	X86	Logo
Test Date	DTM Version
6/29/2010 5:41 PM	1.5.7565.000

Results

All the results required for this submission are listed below.

Failed Tests This section lists any failed tests. Please review the below or contact DTM Support.
+ Pass[5] Fail[1]  -:|:- USB Selective Suspend (Automated)
- Pass[0] Fail[1]  -:|:- RunJob - USB Selective Suspend test library
Pass[1] Fail[0]  -:|:- Fix registry Log:  NotRequired
Pass[0] Fail[1]  -:|:- Execute USB selective suspend test Log:  Present  [ usbhct_s.log.xml ]
Pass[1] Fail[0]  -:|:- Enable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Restore registry Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable AutoPlay Log:  NotRequired
+ Pass[5] Fail[2]  -:|:- USB HIDView (CV) (Manual)
- Pass[0] Fail[1]  -:|:- RunJob - USB HIDView (CV) test library
Pass[0] Fail[2]  -:|:- Execute USB HIDView (CV) test Log:  Present  [ USBCV_Hid.log.xml ]
Pass[1] Fail[0]  -:|:- Fix registry Log:  NotRequired
Pass[1] Fail[0]  -:|:- Enable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Restore registry Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable AutoPlay Log:  NotRequired
+ Pass[5] Fail[2]  -:|:- USB Device Framework (CV) (Manual)
- Pass[0] Fail[1]  -:|:- RunJob - USB Device Framework (CV) library
Pass[0] Fail[2]  -:|:- Execute USB Device Framework (CV) test Log:  Present  [ USBCV_Chap9.log.xml ]
Pass[1] Fail[0]  -:|:- Fix registry Log:  NotRequired
Pass[1] Fail[0]  -:|:- Enable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Restore registry Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable ForcePortsHighSpeed behavior Log:  NotRequired
Pass[1] Fail[0]  -:|:- Disable AutoPlay Log:  NotRequired
+ Pass[4] Fail[1]  -:|:- USB Driver Level Re-Enumeration Test
- Pass[1] Fail[0]  -:|:- RunJob - Install DevED component
Pass[1] Fail[0]  -:|:- Install DevED MSI Log:  NotRequired
Pass[1] Fail[0]  -:|:- Uninstalls the DevED MSI Log:  NotRequired
Pass[1] Fail[0]  -:|:- Install the Driver Log:  NotRequired
Pass[0] Fail[1]  -:|:- Run USB Driver Level Re-Enumeration Automation Log:  Present  [ $console ]  [ USBVirtTest.wtl ]
Pass[1] Fail[0]  -:|:- Uninstall the Driver Log:  NotRequired
+ Pass[0] Fail[1]  -:|:- USB-IF Test Certification ID Check
Pass[0] Fail[1]  -:|:- Execute Test ID Check Log:  Present  [ USBtidCheck.xml ]
+ Pass[1] Fail[1]  -:|:- Scroll Test (Manual)
Pass[1] Fail[1]  -:|:- Run Scroll Test Log:  Present  [ ScrollTestLog_20100629_1611.wtl ]  [ ScrollTestLog_20100629_1611.wtl ]
Pass[1] Fail[0]  -:|:- RunJob - Install .NET Framework 3.5
+ Pass[1] Fail[9]  -:|:- Hot Key Test (Manual)

滚轮测试的时候，我选择的只有竖直方向，并测试通过，也提交了结果，为何在日志中显示的还是Fail呢？键盘上的power键需要测试么？

谢谢!

Answer 1

提示几点：

1， USB的很多测试要求被测设备和DTM client 间连接一个USB 2.0 自供电 HUB。

2，具体的失败分析需要查看详细的测试日志。WTL，XML等。

---

http://www.microsoft.com/china/whdc http://ctcwhql.spaces.live.com/blog/

Answer 2

非常感谢版主的帮助。

我再试试。