none
我用CEPC创建了一个工程,但是发现使用KITL和"Enable Full Kernel Mode"项后,是可以启动的.增加"Enable Kernel Debugger"项后,CEPC无法起来 RRS feed

  • 问题

  • 1.我用CEPC创建了一个工程,但是发现使用KITL和"Enable Full Kernel Mode"项后,是可以启动的
    2.增加"Enable Kernel Debugger"项后,CEPC无法起来
    弹出"The Debugger KITL packet receive has timed out. Do you wish to retry?"

    同时在串口中输出如下的信息:
    VBridge:: VB_INITIALIZED returns [1]

    nit()...TX = [16384] bytes -- Rx = [16384] bytes
    x buffer [0xA20AA200] to [0xA20AE200].
    RTL8139:: MulticastRegs set to : 0-0-0-0-0-0-0-0
    RTL8139:: Set Ndis filter [0xB] -> [0x101E]
    VBridge:: Current VMini packet filter = [0xB]
    Bad RX packet [Header: 0x6F55 -- Length : [65520]]...
    0x83e70938: Exception 00e Thread=83e70938 Proc=c3ea9852 ''
    0x83e70938: AKY=ffffffff PC=802a9606(NK.EXE+0x00089606) ESP=c205f44c
    EA=c2060000
    0x83e70938: Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1
    time(s). This OK if KdStub stumbling on its own BP.
    KdTrap: Exception in debugger, Addr=0x802A9606 - attempting to recover
    0x83e70938: Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1
    time(s). This OK if KdStub stumbling on its own BP.
    KdTrap: Exception in debugger, Addr=0x802A9606 - unable to recover
    0x83e70938:
    Unhandled exception c0000005:
    0x83e70938: Terminating thread 83e70938
    0x83e70938: Secondary thread in proc c3ea9852 (gwes.exe) faulted!
    0x83e70938: <<< Unloading module coredll.dll at address
    0x03F50000-0x03FF3000 (RW data at 0x01FFE000-0x01FFF765)
    0x83e70938: Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1
    time(s). This OK if KdStub stumbling on its own BP.
    KdTrap: Exception in debugger, Addr=0x802601B3 - attempting to recover
    0x83e70938: Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1
    time(s). This OK if KdStub stumbling on its own BP.
    KdTrap: Exception in debugger, Addr=0x802601B3 - unable to recover

    我目标机器上的网卡是RTL8139

    那位帮忙看看是什么原因,搞了好几天了.

     

    2007年8月3日 5:27

答案