none
请问那位做过"USB HUB"的DTM测试工作! RRS feed

  • 常规讨论

  • 各位网友;

    不知那位知道USB HUB的WHQL测试平台是如何搭配的,之前我处有发过邮件,但是一直解没有解决问题,不知那位是否可以把相应的测试平台共享一下啊,现在遇到这种问题实在没有办法,不知如何解决,特别是USB HUB的测试硬件需求这一块,真的不知应如何操作!

     

    Hardware requirements

    The following hardware is required for USB Hub testing.

    • One USB Hub under test (two test devices are required for USB serial number support)
    • One external USB 2.0 high-speed hub, self-powered
    • One external USB 1.1 full-speed hub, self-powered
    • One Cypress Full-Speed USB 2.0 Compliance test board
    • One Cypress Low-Speed USB 2.0 Compliance test board

    The low-speed and full-speed Cypress functional compliance test boards can be purchased directly from the USB Implementer’s forum:

     http://www.usb.org/developers/estoreinfo/USB_product_order_form_.pdf

    Note To reduce the chance of failures caused by unrelated hardware problems, Microsoft recommends that all tests be performed on a client test system which is part of the “Windows Catalog”at  http://www.microsoft.com/windowsxp/pro/upgrading/compat.mspx.

    2008年9月12日 6:00