none
PCI Express Capability WHQL test fail RRS feed

  • 问题

  • Start Test 7/4/2011 5:41:16.934 下午 PCI Function @ 0.1B.0
    Message 7/4/2011 5:41:16.934 下午 Testing PCI function at location 00000000.1B.00
    Message 7/4/2011 5:41:16.934 下午 Found Vendor Specific Capability
    Message 7/4/2011 5:41:16.934 下午 Not found
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] Location = Bus: 00000000h, Device: 1Bh, Function: 0h
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] VendorID = 8086h: Intel Corporation
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] DeviceID = 1C20h: <Not Found>
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] Revision = 5h
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] SubSVid = 14A4h: GVC/BCM Advanced Research
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] SubSysId = 1119h
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] Header = 00h
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] ClassCode= 040300h
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] BaseClass= Multimedia Device
    Message 7/4/2011 5:41:16.934 下午 [PROFILE] SubClass = High-definition Audio
    Message 7/4/2011 5:41:16.934 下午 Please wait...
    Message 7/4/2011 5:41:16.934 下午 Found Power Management Capability
    Message 7/4/2011 5:41:16.934 下午 Found MSI Capability
    Message 7/4/2011 5:41:16.934 下午 Found PCI Express Capability
    Message 7/4/2011 5:41:16.934 下午 PCI-Express Device Type = 9
    End Test 7/4/2011 5:41:16.934 下午 PCI Function @ 0.1B.0
    Result:   Fail
    Repro:   "C:\Program Files\KmLog2\KmLogTransform.exe" -OutFile Out.Txt -CreateLog -LogFile PciHct.WTL -CloseLog -rollup -guid BF0EDF7D-F02B-4E1f-A9FF-3B1CEBA22E72 KmLogProviders.etl

    ======================================================================================================================

    Message 7/4/2011 5:41:16.934 下午 Assertion 06DBD744-95C3-4880-8282-D0C3FF66C3C3: Passed.
    Error 7/4/2011 5:41:16.934 下午 Assertion 13A41D3E-2576-41DC-A67C-525DA3637CEA: FAILED. Bit 15 (Bridge Configuration Retry Enable / Initiate Function Level Reset) in the Device Control register (offset 8h) in the PCI Express Capability table must be read-only and always return 0 as it is reserved for devices other than PCI Express to PCI/PCI-X Bridges and Function Level Reset capableendpoints.. It was fo
    File: <Unspecified file> Line: 0
    Error Type: NT_STATUS
    Error Code: 0xc0000420
    Error Text: Error 0xc0000420
    Message 7/4/2011 5:41:16.934 下午 Testing Device Status Register

    看datasheet中相关的描述是read only的,所以这个问题该怎么解决呢?头大不已,如有了解状况的大大,还请给个提示,感谢~~~

     

    2011年7月5日 7:14

答案