Skip to main content

 none
Error when depoly IoT in SD card RRS feed

  • Question

  • Hi all,

    I purchased a DragonBoard 410c for developing, I downloaded IOT core QCDB410c and tried to flash in my sandisk 64Gb micro SD card, the error "There were some errors while loading Windows IoT Core onto your SD Card" occurred, and here are the logs which I found in C:\Windows\Logs\DISM:

    2016-08-07 11:37:34, Error                 DISM   FFU Provider: PID=5140 base\ntsetup\flashing\ffuapp\corelib\blockflasher.cpp CBlockFlasher::FlashFromFilter: Failed platform ID check. - CFfuManager::FfuLog
    2016-08-07 11:37:34, Error                 DISM   FFU Provider: PID=5140 TID=712 base\ntsetup\opktools\dism\providers\ffuprovider\dll\ffumanager.cpp:248 - CFfuManager::Apply(hr:0x80070032)
    2016-08-07 11:37:34, Error                 DISM   FFU Provider: PID=5140 TID=712 base\ntsetup\opktools\dism\providers\ffuprovider\dll\ffumanager.cpp:167 - CFfuManager::ApplyImage(hr:0x80070032)
    2016-08-07 11:37:34, Error                 DISM   DISM Imaging Provider: PID=5140 TID=712 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:2546 - CGenericImagingManager::InternalCmdFFUApply(hr:0x80070032)
    2016-08-07 11:37:34, Error                 DISM   DISM Imaging Provider: PID=5140 TID=712 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:535 - CGenericImagingManager::ExecuteCmdLine(hr:0x80070032)

    can anyone tell me what's going on and how to fix it.

    Many thanks

    Sunday, August 7, 2016 4:05 AM

Answers

  • Hi William,

    Please use the steps at https://developer.microsoft.com/en-us/windows/iot/GetStarted and select the dragonboard. My suspicion is that you are not using a Windows 10 desktop and other versions of DISM are not compatible with Windows 10 so you will need to use a Windows 10 PC to deploy to a Windows 10 IoT Core device.

    If I am incorrect, please clearly state where the steps at the link above fail for you.

    Sincerely,

    IoTGirl

    Monday, August 8, 2016 6:54 AM
    Moderator

All replies

  • Hi William,

    Please use the steps at https://developer.microsoft.com/en-us/windows/iot/GetStarted and select the dragonboard. My suspicion is that you are not using a Windows 10 desktop and other versions of DISM are not compatible with Windows 10 so you will need to use a Windows 10 PC to deploy to a Windows 10 IoT Core device.

    If I am incorrect, please clearly state where the steps at the link above fail for you.

    Sincerely,

    IoTGirl

    Monday, August 8, 2016 6:54 AM
    Moderator
  • Hi Iotgirl,

    I checked my sys info and my OS version is 10586.494, it's higher than minimal requirement 10.0.10240, here is the screenshot:

    If you need more information about my environment, please let me know.

    Regards

    Tuesday, August 9, 2016 12:16 PM
  • Hi William,

    As I requested above, "If I am incorrect, please clearly state where the steps at the link above fail for you."

    Sincerely,

    IoTGirl

    Tuesday, August 9, 2016 3:42 PM
    Moderator