No announcements
-
2 Votes
Summarize of Image Customization for Windows 10 IoT Core
If you installed the Windows IoT Core Image via IoT Dashboard, please note that the image downloaded is a Windows 10 IoT Core test image designed for prototyping only. If you are looking to ... -
0 Votes
Difference between Windows 10 Desktop and Windows 10 IoT Core
Run Command and make sure you have the "Run as DefaultAccount" checked.) Otherwise HKCU will be the administrator and that will not have an effect on the UI. Also, ... -
1 Votes
GPIO Controlled By Multiple UWP Apps
Operating systems and runtime environments typically provide some form of isolation between applications. Windows uses processes to isolate applications. This isolation is necessary to ... -
2 Votes
Serial Port Communication on Windows IoT Core
Here we talk about how to use Serial Port communication on Windows IoT Core on Raspberry PI.On Raspberry Pi, hardware UART and USB UART Adapters both are usable for your application with serial ...Sticky | 4 Replies | 7590 Views | Created by Michael Xu-MSFT - Friday, December 7, 2018 5:44 AM | Last reply by Michael Xu-MSFT - Wednesday, December 12, 2018 1:29 AM -
23 Votes
Raspberry PI 3B+ boot troubleshooting guide
The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth ...Sticky | 24 Replies | 6713 Views | Created by Michael Xu-MSFT - Friday, November 16, 2018 3:19 AM | Last reply by All display names are already taken - Tuesday, November 5, 2019 9:38 PM -
4 Votes
Getting started on Windows IoT and Azure IoT hub
What is Windows 10 IoT Core and what is Azure IoT Hub? Windows 10 IoT Core (also commonly referred as Windows IoT) is a version of Windows 10 that is optimized for smaller devices ...Sticky | 14 Replies | 7981 Views | Created by Zeeshan Furqan [MSFT] - Thursday, March 10, 2016 12:00 AM | Last reply by IoTGirl - Tuesday, April 3, 2018 3:12 PM
-
0 Votes
What is the trigger that changes “Deferred activation state” to “Not activated state” in Windows 10 IoT?
I am designing a medical device using Windows 10 IoT Enterprise. Because this device is not connected to the Internet and is located on the internal network, the device is created ...Unanswered | 6 Replies | 150 Views | Created by GoodTime1031 - Thursday, December 12, 2019 9:29 AM | Last reply by GoodTime1031 - 5 hours 4 minutes ago -
0 Votes
how to capture and deploy the Windows 10 Enteprise Image with UFFI
Hi, Please can any one help on this as i don't have any ideas about that UFFI boot. I want know how to capture the image and deploy the image in UFFI , as of now ...Unanswered | 2 Replies | 91 Views | Created by jackdun - Friday, December 13, 2019 4:19 AM | Last reply by Sean Liming - 10 hours 45 minutes ago -
0 Votes
Implementing IoT Core Services
I've tried following the Getting Started instructions for Windows 10 IoT Core Services but am having trouble on the last step under Using Device Update Center - "5. ...Unanswered | 33 Replies | 1426 Views | Created by Monarc, Inc - Tuesday, November 20, 2018 5:24 PM | Last reply by Monarc, Inc - Saturday, December 14, 2019 6:12 PM -
271 Votes
Raspberry Pi 4 is now available. Where is Windows IoT?
Raspberry Pi 4 is now available. Where is Windows IoT?Proposed | 65 Replies | 27362 Views | Created by Carlo A. Mendoza - Monday, June 24, 2019 6:22 AM | Last reply by KarlDroid - Friday, December 13, 2019 2:11 AM -
0 Votes
Is there a memory leak in StorageFolder.GetFolderAsync()?
Hi, when running the following code (created with VS2019 using UWP 6.2.9 from a blank UWP project) on a Raspberry Pi 3B with Windows IoT core (10.0.17763.107) the memory usage increases ...Unanswered | 5 Replies | 427 Views | Created by David Gütig - Monday, November 25, 2019 11:22 PM | Last reply by David Gütig - Thursday, December 12, 2019 8:29 PM -
0 Votes
Windows 10 IoT Page Transition is too Slow !!!
Hi, I'm developing an application with Windows 10 IoT but the application is runninng very slow. What can I do to speed this up? Application, Read sensor values with the ...Unanswered | 6 Replies | 320 Views | Created by Özgür SAKLANMAZ - Wednesday, December 4, 2019 8:08 AM | Last reply by Özgür SAKLANMAZ - Thursday, December 12, 2019 11:09 AM -
0 Votes
Help Setting up IOT
I am completely new to this IoT Thing but i would like to get more familar with it. I ahve a Fujitsu Furto S520n. It has an AMD G-series Embedded Processor in it. I would like a kind of step by step ...Unanswered | 4 Replies | 418 Views | Created by Noob_Novice - Thursday, November 21, 2019 7:28 PM | Last reply by Noob_Novice - Wednesday, December 11, 2019 8:48 PM -
0 Votes
How to configure and use Barcode Scanner with Raspberry Pi 3B+ ?
Hello, I am using RaspberryPi3 B+ with Windows 10 IoT. I have USB-HID Barcode Scanner Model HS-2001B. I have no idea from where I begin and how to use it with my Pi. Could ...Unanswered | 1 Replies | 119 Views | Created by GASTON JM - Tuesday, December 10, 2019 2:20 PM | Last reply by Michael Xu-MSFT - Wednesday, December 11, 2019 1:24 AM -
0 Votes
MFRC522 on Windows IOT UID Reading 00-00-00-00-00
Hi, I am using this guide to setup the MFRC522 on Windows IOT: https://stackoverflow.com/questions/342 ... indows-iot However I am ...Unanswered | 7 Replies | 306 Views | Created by T3rr0rByte13-Hobbyware.org - Monday, December 2, 2019 3:10 AM | Last reply by Michael Xu-MSFT - Monday, December 9, 2019 1:43 AM -
0 Votes
Windows 10 IoT Driver Development
Hi, I am working on Windows 10 IoT LTSC 2019 driver development . Through my readings i had an understanding like any driver developed for ...Unanswered | 1 Replies | 184 Views | Created by Rabeesh Thanduparakkal - Friday, December 6, 2019 9:12 AM | Last reply by Michael Xu-MSFT - Monday, December 9, 2019 1:29 AM -
0 Votes
RHPROXy on intel Atom E3930 with windows 10 iot enterprise 1809
Hi There, i am searching for a solution to activate the rhproxy under Windows 10 iot enterprise. The rhproxy.sys file is available under my system but ...Discussion | 1 Replies | 200 Views | Created by Dsten3 - Thursday, December 5, 2019 8:48 AM | Last reply by Sean Liming - Friday, December 6, 2019 3:43 PM -
0 Votes
Windows 10 IoT LTSB and UWF / removing volume from UWF configuration
Back in WES7/FBWF times there was a possibility to permanently delete volume configuration from FBWF by using FBWFMGR /removevolume V: 0|1 Now, with UWF ...Unanswered | 3 Replies | 299 Views | Created by MKN_RM - Thursday, October 17, 2019 2:10 PM | Last reply by MKN_RM - Friday, December 6, 2019 9:15 AM -
0 Votes
WdfUsbTargetDeviceCreate () function error in HIDUSBFX2 driver with ufxclientsample driver
Greetings, we're working on implementation of USB (HID) client functionality for iMX8 based device. As a prototype we use ufclientsample and HIDUSBFX2 drivers ...Unanswered | 2 Replies | 228 Views | Created by Pavel Kabanov - Wednesday, December 4, 2019 12:49 PM | Last reply by Michael Xu-MSFT - Friday, December 6, 2019 7:49 AM -
0 Votes
Windows 10 1809 and UWF Exceptions causing spot scan boot loop
When using the UWF write filter we are finding the UWF exceptions cause corruption errors. This then causes a chkdsk /Spotfix to run. This only occurs in area's on the c: which have been made an ...Unanswered | 1 Replies | 217 Views | Created by Lyndon_971 - Wednesday, December 4, 2019 2:21 PM | Last reply by Michael Xu-MSFT - Friday, December 6, 2019 3:42 AM -
0 Votes
Bug: Cumulative Updates applied to Production Image causing Boot loop after a few days
> Reason Code: 0x80020003 >> Shutdown Type: restart >> ... -
0 Votes
Does anyone here arrive to boot RaspberryPi3 B+ with Windows 10 IoT ?
Hello everybody, I am usually stuck with the rainbow screen when I try to boot my RaspberryPi3 B+ with Windows IoT ! I tired using the technical preview build ...Unanswered | 1 Replies | 347 Views | Created by GASTON JM - Friday, November 29, 2019 8:12 AM | Last reply by Michael Xu-MSFT - Monday, December 2, 2019 2:39 AM -
0 Votes
From where Can I download Windows IoT 16299 version for my Raspberry Pi3 B+ ?
Hello, I tried everything to make my Raspberry Pi3 B+ boot with Windows IoT but I did not succeed. I will try with version 16299 so anyone could give me a link or send me .ffu of ...Answered | 3 Replies | 310 Views | Created by GASTON JM - Thursday, November 28, 2019 8:51 AM | Last reply by Michael Xu-MSFT - Monday, December 2, 2019 1:51 AM -
3 Votes
downloading previous version of windows 10 IOT core
I want to download windows 10 IOT core previous version i.e build number 15063 can any one help me out how to install the file and where the ISO file will be available, what are the ...Answered | 56 Replies | 4190 Views | Created by GVS GOUTHAM - Wednesday, March 7, 2018 8:37 AM | Last reply by GASTON JM - Friday, November 29, 2019 7:29 AM -
0 Votes
Does windows 10 IoT compatible to Beaglecore (AM335x Cortex-A8 “Sitara”)?
Hello, We want to develop a product that uses Beaglecore AM335x Cortex-A8 “Sitara” . We have to implement Window 10 IoT Core for the above ...Answered | 1 Replies | 295 Views | Created by mbleSol - Wednesday, November 27, 2019 1:50 PM | Last reply by Michael Xu-MSFT - Thursday, November 28, 2019 2:16 AM -
0 Votes
iMX8M Mini with mipi dsi to LCD
Hi everyone, We have a customize board using NXP iMX8M Mini. I use the BSP from NXP website and modified the firmware that can successfully boot to UEFI. The problem is the LCD ...Unanswered | 3 Replies | 375 Views | Created by Tina Hung - Friday, November 22, 2019 9:27 AM | Last reply by Michael Xu-MSFT - Wednesday, November 27, 2019 8:48 AM - Items 1 to 20 of 3898 Next ›
No announcements