none
Error in installation of dotnetfx3setup.exe

    Question

  • Hello, I ran the vs_uninst_winfx.exe tool.  When I tried to run the dotnetfx3xsetup tool, I got the following error in the file

    dd_dotnetfx3error.txt in the user temp folder.  Please direct me to the correct forum for this question. 

    As always, we need this resolved as soon as you can.  Thanks

    Jay Fischer

    UNO Software Development

    Department of Health and Hospitals for Louisiana

     

    [10/02/06,10:40:49] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [10/02/06,10:40:49] WIC Installer: [2] Setup Failed on component WIC Installer
    [10/02/06,10:40:55] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [10/02/06,10:40:55] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
    [10/02/06,11:46:28] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [10/02/06,11:46:28] WIC Installer: [2] Setup Failed on component WIC Installer
    [10/02/06,11:46:38] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [10/02/06,11:46:38] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
    [10/02/06,11:52:03] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [10/02/06,11:52:03] WIC Installer: [2] Setup Failed on component WIC Installer
    [10/02/06,11:52:11] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [10/02/06,11:52:12] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
    [10/02/06,15:14:37] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [10/02/06,15:14:37] WIC Installer: [2] Setup Failed on component WIC Installer
    [10/02/06,15:15:05] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [10/02/06,15:15:05] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.

    Tuesday, October 03, 2006 10:07 AM

Answers

  • I had a similar problem installing .NET framework 3.5 SP1 over a system having 2.0 SP1  running WEPOS SP3, with WIC giving the following error(I suppose it is running in 'quiet' mode, so details were suppressed):

    [11/28/08,02:36:31] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/28/08,02:36:55] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/28/08,03:36:16] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.

    After searching the net many days for a suitable fix to no avail, I inspected the "dd_WIC.txt" file created by .NET framework 3.5 SP1 installer, to find the following lines:

    0.094:  C:\Windows\system32\WMPhoto.dll is Present
    0.109: FileVersion of C:\Windows\system32\WMPhoto.dll is Greater Than 6.0.5840.16388
    0.109: Condition Check for Line 3 of PreRequisite returned FALSE
    0.156: WIC Setup encountered an error:  Newer version of update is already on the system.

    So there you have it, WIC installer seemed to have failed since a newer version of WMPhoto.dll existed on my machine. I renamed the WMPhoto.dll and then tried running WIC installer and it completed succesfully. .NET framework 3.5 SP1 also installed successfully thereafter. I thereafter restored the original WMPhoto.dll(newer version.)

    Another blog gives a better procedure to remove WMPhoto.dll:
    cd c:\WINDOWS\system32
    regsvr32 /u WMPhoto.dll
    del WMPhoto.dll
    http://forums.microsoft.com/MSR/ShowPost.aspx?PostID=1629908&SiteID=37

    The question arises how the newer version of WMPhoto.dll has been installed in the machine. After comparing the original WEPOS with WEPOS after SP3 was installed, I found out that WMPhoto.dll has been installed by SP3, and is not included in the original WEPOS. Other users have also reported that they have been using XP SP3 and have experienced the error:
    "I also have windows XP servicepack 3 and same problems as the most of you, guys."
    http://forums.bigfishgames.com/posts/list/80/9939.page

    Alternatively, you can try installing WEPOS or XP(as the case maybe), installing fx3.5 and then installing SP3. This approach doesnt require any files to be deleted. I am not sure that by deleting any files, whether any agreements would be violated.


    Hope this post was of help.
    • Marked as answer by Figo Fei Tuesday, January 27, 2009 7:36 AM
    Wednesday, January 21, 2009 5:32 AM
  • I have run into the same issues with my install.  After digging through the log files, I found that  the dd_WIC.txt file was reporting an error "Failed To Enable SE_SECURITY_PRIVILEGE".  Looking further into this error, I found out that my local admin did not have the privledge to "Manage auditing and security log" per local security policies.  Once I logged into an accout with the right permissions, I was able to install.

    Josh Laase

    Wednesday, November 08, 2006 4:15 PM

All replies

  • Moving to .Net forum

    -Tim <msft>

    Friday, October 13, 2006 10:16 PM
    Moderator
  • Please send your log files to a-tbeck(a)microsoft(dot)com so that we can review and debug the situation.  You should find them under (%temp%\dd*.*).  Please refer to this post in your email (http://forums.microsoft.com/msdn/showpost.aspx?postid=784106&SiteID=1).
    Monday, October 23, 2006 4:45 PM
    Moderator
  • I have run into the same issues with my install.  After digging through the log files, I found that  the dd_WIC.txt file was reporting an error "Failed To Enable SE_SECURITY_PRIVILEGE".  Looking further into this error, I found out that my local admin did not have the privledge to "Manage auditing and security log" per local security policies.  Once I logged into an accout with the right permissions, I was able to install.

    Josh Laase

    Wednesday, November 08, 2006 4:15 PM
  • I just wanted to add a little more detail to the solution:

     By default, users in the Administrator group have "Manage auditing and security log" enabled. This, of course, can be changed, and frequently is in enterprise environments. For example, domain admininstrators may be the only group with this security privilege enabled in your environment. So if you're an administrator but not a domain administrator, you'll get the above error. How do you check?

    1. On the start menu, click "Run" and type gpedit.msc

    2. Navigate to Local Computer Policy/Computer Configuration/Windows Settings/Security Settings/Local Policies/User Rights Assignment/

    3. Scroll down the list of policies until you see "Manage Auditing and Security Log." The value given is the group that has the privilege. If you're not in this group, you'll see the above error.

    How might this be resolved?

    1. Ask a member of the applicable security group to perform the install

    2. Become a member of the applicable security group.

    3. Change the settings of your current security group.

    I hope this helps.

    --Bryan Wheeler


    This posting is provided "AS IS" with no warranties, and confers no rights.

     

     

     

     

    Wednesday, November 08, 2006 8:41 PM
  • Hi Bryan,

    I am an administrator of my machine and .NET 3 installation still fails with the following error:

    [11/20/06,18:59:56] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/20/06,19:00:04] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/20/06,19:00:04] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.

    also I checked "Manage Auditing and Security Log." setting and Administrators have this privilege.

    What else should I be checking?

    By the way, I get another error when I try to install "Windows Desktop Search".

    4.454: 2006/11/20 16:32:24.984 (local)
    4.454: c:\edb5ddad8f3f0ea0f83b8e49fb7a\update\update.exe (version 6.2.29.0)
    4.454: Failed To Enable SE_BACKUP_PRIVILEGE
    4.469:  Setup encountered an error:  You do not have permission to update Windows XP.
    Please contact your system administrator.
    4.469: You do not have permission to update Windows XP.
    Please contact your system administrator.
    4.469: Update.exe extended error code = 0xf004
    4.469: Update.exe return code was masked to 0x643 for MSI custom action compliance.

    In another forum, a user mentioned that this is related to "Back up files and directories" policy. On my machine which is running XP SP2, this is assigned to "Backup Operators" and modification of this is disabled.

    Any ideas?

    Thanks,

    Atesh

    Tuesday, November 21, 2006 3:12 AM
  • I had the same problem.  But this solution solved my problem and I setted up the framework3.0 succesfully.

    Thanks

    Friday, November 24, 2006 8:31 AM
  • atesh06,

    since you have encountered the problem:

    WIC Installer: [2] Setup Failed on component WIC Installer

     you can probably find more precise information in the file %TEMP%dd_WIC.txt

     

    Tuesday, December 05, 2006 9:38 AM
  • Hi,

    On XP, you need  Microsoft Windows Imaging Component update wic_x86_enu.exe available on windows update

    The Microsoft Windows Imaging Component (WIC) for Windows Presentation Foundation (WPF) provides an extensible framework for working with images and image metadata

    Check on MSDN regarding WIC

    http://msdn2.microsoft.com/en-us/library//ms737408.aspx

     

    Thursday, February 22, 2007 11:20 AM
  • Hi 2 All..

     

    The solution for this :

     

    revert your compter from domain to workgroup and try to install .net3.0 i will work.. once done revert back to domain..

     

    thankyou

    Wednesday, November 14, 2007 12:33 PM
  • I tried all the above with no success, however after hours upon hours of google'ing and failed attempts I eventually did get it to work. I'm not sure which one of these actually made it work but I would try them all.

    - The "Manage auditing and security log" enabled fix (explained above)
    - Install latest version of "Windows Installer"
    - Uninstalled and reinstalled .Net 1.1
    - Registry key fix: <http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1908743&SiteID=1>
    - Uninstalled WIC (Windows Imaging Component) using Add/Remove Programs.
    - Then reinstalled it with the executable "wic_x86_enu.exe"
    *Install Instructions:
    1) Abtain a copy of the executable: <http://www.microsoft.com/downloads/details.aspx?FamilyID=8e011506-6307-445b-b950-215def45ddd8&DisplayLang=en>
    and use IE to download it, not firefox, firefox doesn't validate very well.
    2)Open a command prompt and go to the directory where wic_x86_enu.exe is located and type:
    Code Snippet

    wic_x86_enu.exe /quiet /norestart /log:"C:\Documents and Settings\user_name\Desktop\dd_WIC.txt"



    You should get this kind of output:
    0.110: 2008/02/22 11:07:07.421 (local)
    0.110: l:\546a49a760d8c9d4f8c9f1b05f\update\update.exe (version 6.3.4.0)
    0.110: Hotfix started with following command line: /quiet /norestart /log:C:\Documents and Settings\user_name\Desktop\dd_WIC.txt
    0.110: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.110:  C:\WINDOWS\system32\WindowsCodecs.dll is Not Present
    0.110: First Condition in Test.WindowsCodecsVer.Section Succeeded
    0.110: Condition succeeded for section Test.WindowsCodecsVer.Section in Line 1 of PreRequisite
    0.110:  C:\WINDOWS\system32\WindowsCodecsExt.dll is Not Present
    0.110: First Condition in Test.WindowsCodecsExtVer.Section Succeeded
    0.110: Condition succeeded for section Test.WindowsCodecsExtVer.Section in Line 2 of PreRequisite
    0.110:  C:\WINDOWS\system32\WMPhoto.dll is Not Present
    0.110: First Condition in Test.WMPhotoVer.Section Succeeded
    0.110: Condition succeeded for section Test.WMPhotoVer.Section in Line 3 of PreRequisite
    0.110:  C:\WINDOWS\system32\PhotoMetadataHandler.dll is Not Present
    0.110: First Condition in Test.PhotoMetadataHandlerVer.Section Succeeded
    0.110: Condition succeeded for section Test.PhotoMetadataHandlerVer.Section in Line 4 of PreRequisite
    0.656: In Function TestVolatileFlag, line 12013, RegOpenKeyEx failed with error 0x2
    0.656: In Function TestVolatileFlag, line 12045, RegOpenKeyEx failed with error 0x2
    0.656: ---- Old Information In The Registry ------
    0.656: Source:l:\39eee6ffc7d8dd9dc5b7
    0.656: Destination:
    0.656: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000000_.tmp.dll (6.3.4.0)
    0.656: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000003_.tmp.dll (6.3.4.0)
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$
    0.688: Destination:
    0.688: Source:c:\windows\$hf_mig$
    0.688: Destination:
    0.688: ---- New Information In The Registry ------
    0.688: Source:l:\39eee6ffc7d8dd9dc5b7
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000000_.tmp.dll (6.3.4.0)
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000003_.tmp.dll (6.3.4.0)
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst
    0.688: Destination:
    0.688: Source:C:\WINDOWS\$NtUninstallWIC$
    0.688: Destination:
    0.688: Source:c:\windows\$hf_mig$
    0.688: Destination:
    0.688: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.688: SetProductTypes: InfProductBuildType=BuildType.IP
    0.688: SetAltOsLoaderPath: No section uses DirId 65701; done.
    0.719: DoInstallation: FetchSourceURL for l:\546a49a760d8c9d4f8c9f1b05f\update\update_WinXP.inf failed
    0.719: CreateUninstall = 1,Directory = C:\WINDOWS\$NtUninstallWIC$
    0.719: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102
    0.719: BuildCabinetManifest: update.url absent
    0.719: Starting AnalyzeComponents
    0.719: AnalyzePhaseZero used 0 ticks
    0.719: No c:\windows\INF\updtblk.inf file.
    0.719: OEM file scan used 0 ticks
    0.719: AnalyzePhaseOne: used 0 ticks
    0.719: AnalyzeComponents: Hotpatch analysis disabled; skipping.
    0.719: AnalyzeComponents: Hotpatching is disabled.
    0.735: AnalyzePhaseTwo used 16 ticks
    0.735: AnalyzePhaseThree used 0 ticks
    0.735: AnalyzePhaseFive used 0 ticks
    0.735: AnalyzePhaseSix used 0 ticks
    0.735: AnalyzeComponents used 16 ticks
    0.735: Downloading 0 files
    0.735: bPatchMode = FALSE
    0.735: Inventory complete: ReturnStatus=0, 16 ticks
    0.735: Num Ticks for invent : 16
    0.735: Allocation size of drive C: is 4096 bytes, free space = 51951206400 bytes
    0.750: AnalyzeDiskUsage:  Skipping EstimateDiskUsageForUninstall.
    0.750: Drive C: free 49544MB req: 10MB w/uninstall: NOT CALCULATED.
    0.750: CabinetBuild complete
    0.750: Num Ticks for Cabinet build : 15
    0.750: DynamicStrings section not defined or empty.
    0.750: FileInUse:: Added to Filelist: c:\windows\wic.cat
    0.750: FileInUse:: Added to Filelist: c:\windows\system32\wmphoto.dll
    0.750: FileInUse:: Added to Filelist: c:\windows\system32\windowscodecsext.dll
    0.750: FileInUse:: Added to Filelist: c:\windows\system32\windowscodecs.dll
    0.750: FileInUse:: Added to Filelist: c:\windows\system32\photometadatahandler.dll
    0.969: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\wic.cat
    1.094: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\wmphoto.dll
    1.219: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\windowscodecsext.dll
    1.360: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\windowscodecs.dll
    1.500: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\photometadatahandler.dll
    2.500: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102
    2.578: Num Ticks for Backup : 1828
    2.844: Num Ticks for creating uninst inf : 266
    2.860: Registering Uninstall Program for -> WIC, WIC , 0x0
    2.891: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102
    12.188: System Restore Point set.
    12.281: Copied file:  C:\WINDOWS\system32\spmsg.dll
    12.406: PFE2: Not avoiding Per File Exceptions.
    12.406: GetCatVersion:  Failed to retrieve version information from C:\WINDOWS\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\WIC.cat with error 0x80092004
    12.422: GetCatVersion:  Failed to retrieve version information from C:\WINDOWS\WIC.cat with error 0x80092004
    12.594: Copied file:  C:\WINDOWS\system32\WindowsCodecs.dll
    12.672: Copied file:  C:\WINDOWS\system32\WindowsCodecsExt.dll
    12.719: Copied file:  C:\WINDOWS\system32\WMPhoto.dll
    12.891: Copied file:  C:\WINDOWS\system32\photometadatahandler.dll
    13.203: DoInstallation: Installing assemblies with source root path: l:\546a49a760d8c9d4f8c9f1b05f\
    13.203: Num Ticks for Copying files : 10359
    19.891: Num Ticks for Reg update and deleting 0 size files : 6688   
    19.906: ---- Old Information In The Registry ------
    19.906: Source:l:\39eee6ffc7d8dd9dc5b7
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000000_.tmp.dll (6.3.4.0)
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000003_.tmp.dll (6.3.4.0)
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$
    19.906: Destination:
    19.906: Source:c:\windows\$hf_mig$
    19.906: Destination:
    19.906: ---- New Information In The Registry ------
    19.906: Source:l:\39eee6ffc7d8dd9dc5b7
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000000_.tmp.dll (6.3.4.0)
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst\_000003_.tmp.dll (6.3.4.0)
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$\spuninst
    19.906: Destination:
    19.906: Source:C:\WINDOWS\$NtUninstallWIC$
    19.906: Destination:
    19.906: Source:c:\windows\$hf_mig$
    19.906: Destination:
    21.031: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do.
    21.047: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0


    Then cross your fingers and hope the install works, cause if not you're going to have to dig even deeper than I did...and I dug deep...All in all I think WIC was just screwed up, and it's going to keep giving you errors unless you do a clean install of it.

    Good luck.

    Cheers


    • Proposed as answer by Figo Fei Thursday, February 12, 2009 9:19 AM
    Friday, February 22, 2008 8:48 PM
  • I am facing issues installing .NET 3.0. I nstalled Beta version of .NET3.5 which I was unable to upgrade to .NET 3.5SP1 and in the process I had to unsinatall it. from then on problems started to multiply. Now I am not able to install .NET 3.0 too. I cleaned up all installation entries for .NET 3.0 and 3.5 through the utility cleanup_tool.exe

    When I try to install .NET 3.0 I get the following error
    [01/10/09,11:07:17] Windows Presentation Foundation: [2] Error: Installation failed for component Windows Presentation Foundation. MSI returned error code 1603
    [01/10/09,11:08:04] WapUI: [2] DepCheck indicates Windows Presentation Foundation is not installed.
    [01/10/09,11:08:04] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.

    When I looked into the log dd_wpf_*txt. I found the following error. Can some one point me in the right direction?

    MSI (s) (4C:84) [11:06:59:120]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI105.tmp, Entrypoint: Install_PFC_Catalog
    MSI (s) (4C!E0) [11:07:04:207]: Product: Windows Presentation Foundation -- Error 2018. Failed to install catalog file : Failed to run CryptCATAdminAddCatalog function..

    Error 2018. Failed to install catalog file : Failed to run CryptCATAdminAddCatalog function..
    MSI (s) (4C:44) [11:07:04:918]: Executing op: Header(Signature=1397708873,Version=301,Timestamp=975853766,LangId=0,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
    MSI (s) (4C:44) [11:07:04:918]: Executing op: DialogInfo(Type=0,Argument=0)
    MSI (s) (4C:44) [11:07:04:918]: Executing op: DialogInfo(Type=1,Argument=Windows Presentation Foundation)
    MSI (s) (4C:44) [11:07:04:918]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
    MSI (s) (4C:44) [11:07:04:918]: Executing op: ActionStart(Name=RegisterFonts,Description=Registering fonts,Template=Font: [1])
    MSI (s) (4C:44) [11:07:04:918]: Executing op: SetTargetFolder(Folder=C:\WINDOWS\Fonts\)
    MSI (s) (4C:44) [11:07:04:918]: Executing op: FontUnregister(Title=Global User Interface,File=GlobalUserInterface.CompositeFont)






     

    Saturday, January 10, 2009 6:10 AM
  • I had a similar problem installing .NET framework 3.5 SP1 over a system having 2.0 SP1  running WEPOS SP3, with WIC giving the following error(I suppose it is running in 'quiet' mode, so details were suppressed):

    [11/28/08,02:36:31] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/28/08,02:36:55] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/28/08,03:36:16] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.

    After searching the net many days for a suitable fix to no avail, I inspected the "dd_WIC.txt" file created by .NET framework 3.5 SP1 installer, to find the following lines:

    0.094:  C:\Windows\system32\WMPhoto.dll is Present
    0.109: FileVersion of C:\Windows\system32\WMPhoto.dll is Greater Than 6.0.5840.16388
    0.109: Condition Check for Line 3 of PreRequisite returned FALSE
    0.156: WIC Setup encountered an error:  Newer version of update is already on the system.

    So there you have it, WIC installer seemed to have failed since a newer version of WMPhoto.dll existed on my machine. I renamed the WMPhoto.dll and then tried running WIC installer and it completed succesfully. .NET framework 3.5 SP1 also installed successfully thereafter. I thereafter restored the original WMPhoto.dll(newer version.)

    Another blog gives a better procedure to remove WMPhoto.dll:
    cd c:\WINDOWS\system32
    regsvr32 /u WMPhoto.dll
    del WMPhoto.dll
    http://forums.microsoft.com/MSR/ShowPost.aspx?PostID=1629908&SiteID=37

    The question arises how the newer version of WMPhoto.dll has been installed in the machine. After comparing the original WEPOS with WEPOS after SP3 was installed, I found out that WMPhoto.dll has been installed by SP3, and is not included in the original WEPOS. Other users have also reported that they have been using XP SP3 and have experienced the error:
    "I also have windows XP servicepack 3 and same problems as the most of you, guys."
    http://forums.bigfishgames.com/posts/list/80/9939.page

    Alternatively, you can try installing WEPOS or XP(as the case maybe), installing fx3.5 and then installing SP3. This approach doesnt require any files to be deleted. I am not sure that by deleting any files, whether any agreements would be violated.


    Hope this post was of help.
    • Marked as answer by Figo Fei Tuesday, January 27, 2009 7:36 AM
    Wednesday, January 21, 2009 5:32 AM
  • I am wondering:

    Are you part of the group that has rights to manage the "Manage auditing and security log" policy. The default is Administrators; but did anyone modified it?

    [Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\"Manage auditing and security log"]


    you can use the "Security Configuration Management" tool to check

    Monday, February 09, 2009 11:16 PM
  • Hi,
    I have a similiar problem when trying to install .Net 3.0 or higher. I receive the "1603" Error. This is what the dd_dotnetfx3error.txt looks like:
    [05/27/09,10:00:00] WIC-Installer: [2] Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation.
    "
    [05/27/09,10:00:00] WIC-Installer: [2] Setup Failed on component WIC-Installer
    [05/27/09,10:00:15] WapUI: [2] DepCheck indicates WIC-Installer is not installed.
    [05/27/09,16:32:36] WIC-Installer: [2] Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation.
    "
    [05/27/09,16:32:36] WIC-Installer: [2] Setup Failed on component WIC-Installer
    [05/27/09,16:32:51] WapUI: [2] DepCheck indicates WIC-Installer is not installed.
    [05/27/09,19:56:10] WIC-Installer: [2] Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation.
    "
    [05/27/09,19:56:10] WIC-Installer: [2] Setup Failed on component WIC-Installer
    [05/27/09,19:56:33] WapUI: [2] DepCheck indicates WIC-Installer is not installed.
    [05/28/09,14:09:05] WIC-Installer: [2] Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation.
    "
    [05/28/09,14:09:05] WIC-Installer: [2] Setup Failed on component WIC-Installer
    [05/28/09,14:09:20] WapUI: [2] DepCheck indicates WIC-Installer is not installed.
    [05/28/09,17:10:35] WIC-Installer: [2] Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation.
    "
    [05/28/09,17:10:35] WIC-Installer: [2] Setup Failed on component WIC-Installer
    [05/28/09,17:10:49] WapUI: [2] DepCheck indicates WIC-Installer is not installed.
    
    As prposed above, I tried to install WIC manually, but it aborts with an unspecific error message. This is what the dd_WIC.txt log-file looks like:
    [dd_WIC.txt]
    0.062: ================================================================================
    0.062: 2009/05/28 16:57:15.593 (local)
    0.062: c:\7baa066baeb9d54b33550c6f\update\update.exe (version 6.3.4.0)
    0.062: Hotfix started with following command line: /quiet /norestart /log:d:\downloads\dd_WIC.txt 
    0.062: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.062:  C:\WINDOWS\system32\WindowsCodecs.dll is Not Present
    0.062: First Condition in Test.WindowsCodecsVer.Section Succeeded
    0.062: Condition succeeded for section Test.WindowsCodecsVer.Section in Line 1 of PreRequisite 
    0.062:  C:\WINDOWS\system32\WindowsCodecsExt.dll is Not Present
    0.062: First Condition in Test.WindowsCodecsExtVer.Section Succeeded
    0.062: Condition succeeded for section Test.WindowsCodecsExtVer.Section in Line 2 of PreRequisite 
    0.062:  C:\WINDOWS\system32\WMPhoto.dll is Not Present
    0.062: First Condition in Test.WMPhotoVer.Section Succeeded
    0.062: Condition succeeded for section Test.WMPhotoVer.Section in Line 3 of PreRequisite 
    0.062:  C:\WINDOWS\system32\PhotoMetadataHandler.dll is Not Present
    0.062: First Condition in Test.PhotoMetadataHandlerVer.Section Succeeded
    0.062: Condition succeeded for section Test.PhotoMetadataHandlerVer.Section in Line 4 of PreRequisite 
    0.859: In Function TestVolatileFlag, line 12013, RegOpenKeyEx failed with error 0x2
    0.859: In Function TestVolatileFlag, line 12045, RegOpenKeyEx failed with error 0x2
    0.859: ---- Old Information In The Registry ------
    0.859: Source:c:\da22814ebd0eaa14079cca 
    0.859: Destination: 
    0.859: ---- New Information In The Registry ------
    0.859: Source:c:\da22814ebd0eaa14079cca 
    0.859: Destination: 
    0.859: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
    0.859: SetProductTypes: InfProductBuildType=BuildType.IP
    0.859: SetAltOsLoaderPath: No section uses DirId 65701; done.
    0.859: DoInstallation: FetchSourceURL for c:\7baa066baeb9d54b33550c6f\update\update_WinXP.inf failed
    0.859: CreateUninstall = 1,Directory = C:\WINDOWS\$NtUninstallWIC$ 
    0.875: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102
    0.875: BuildCabinetManifest: update.url absent
    0.875: Starting AnalyzeComponents
    0.875: AnalyzePhaseZero used 0 ticks
    0.875: No c:\windows\INF\updtblk.inf file.
    0.875: OEM file scan used 0 ticks
    0.875: AnalyzePhaseOne: used 0 ticks
    0.875: AnalyzeComponents: Hotpatch analysis disabled; skipping.
    0.875: AnalyzeComponents: Hotpatching is disabled.
    0.875: AnalyzePhaseTwo used 0 ticks
    0.875: AnalyzePhaseThree used 0 ticks
    0.875: AnalyzePhaseFive used 0 ticks
    0.875: AnalyzePhaseSix used 0 ticks
    0.875: AnalyzeComponents used 0 ticks
    0.875: Downloading 0 files
    0.875: bPatchMode = FALSE
    0.875: Inventory complete: ReturnStatus=0, 16 ticks
    0.875: Num Ticks for invent : 16
    0.875: Allocation size of drive C: is 4096 bytes, free space = 9065205760 bytes
    0.890: AnalyzeDiskUsage:  Skipping EstimateDiskUsageForUninstall.
    0.890: Drive C: free 8645MB req: 10MB w/uninstall: NOT CALCULATED.
    0.890: CabinetBuild complete
    0.890: Num Ticks for Cabinet build : 15
    0.890: DynamicStrings section not defined or empty.
    0.906: FileInUse:: Added to Filelist: c:\windows\wic.cat
    0.906: FileInUse:: Added to Filelist: c:\windows\system32\wmphoto.dll
    0.906: FileInUse:: Added to Filelist: c:\windows\system32\windowscodecsext.dll
    0.906: FileInUse:: Added to Filelist: c:\windows\system32\windowscodecs.dll
    0.906: FileInUse:: Added to Filelist: c:\windows\system32\photometadatahandler.dll
    0.968: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.015: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.031: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\wic.cat
    1.046: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.093: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.109: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\wmphoto.dll
    1.125: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.171: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.187: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\windowscodecsext.dll
    1.203: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.234: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.265: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\windowscodecs.dll
    1.281: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.312: FileInUse:: IsTaskUsingModule: EnumerateLoadedModules64 failed: 0xc0000022
    1.328: FileInUse:: PrintTasksUsingModule: No tasks found using c:\windows\system32\photometadatahandler.dll
    2.328: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102
    2.437: Num Ticks for Backup : 1547
    2.546: Num Ticks for creating uninst inf : 109
    2.562: Registering Uninstall Program for -> WIC, WIC , 0x0
    2.562:  Unable to get File Version 
    2.562: Failed to copy spupdsvc.exe to system32
    2.796: DeRegistering the Uninstall Program -> WIC, 0
    2.796: Das WIC Setup wurde abgebrochen.
    2.796: Update.exe extended error code = 0xf00d
    2.796: Update.exe return code was masked to 0x643 for MSI custom action compliance.
    
    I don't get from it, what the problem is. Can anyone help me ?
    Thank in advance!
    Thursday, May 28, 2009 3:15 PM
  • I think I came up with a solution: I also had trouble installing Internet Explorer 7 and 8 and the same thing with Windows Media Player 10 and 11 (and of course .Net 3.0 and Service Pack 3).
    When searching for a solution vor the WMP error, i found this:
    http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=8007f00d&contextid=10050&originalid=8007f00d

    Renaming the spupdsvc.exe actually worked for WMP but surprisingly for all other errors, too. I have them all installed by now and I'm glad it was an quiet simple solution (although not easy to find). Maybe one of the above steps is necessary for you... i already did that, so I can't tell if it was spupdsvc.exe alone, or not. If you experience trouble with the update process after you renamed it, just rename it back...

    I hope this a help to you, when google came up with this page for you :)
    • Proposed as answer by geldinho Monday, June 01, 2009 5:38 PM
    Monday, June 01, 2009 11:48 AM
  • Geldinho seems to have the correct answer, well at least for me.

    My problem is the same as above cases. I'm running XP SP 2 and just reloaded windows now I cant install .net 3.5 and running the WIC install (wic_x86_enu.exe) simply fails. My user is part of the adminsitrators group and I have access rights for the 'SE_SECURITY_PRIVILEGE', along with all the other privileges an admin should have. I've also found that trying to install XP SP 3 fails (gets right to the end then dies).

    I have followed Geldinho post above..
    1. Renamed the file C:\WINDOWS\system32\spupdsvc.exe to spupdsvc_old.exe.
    2. Run the WIC install (wic_x86_enu.exe) - should install no problem. This will copy the correct spupdsvc.exe.
    3. Run .net 3.5 and other installs. Should work fine now (well did for me).

    Note: If you have any issues, you can always rename the file 'spupdsvc_old.exe' back to 'spupdsvc.exe' and try other solutions. Best of luck.. Oh and Geldinho, really big thank you :D
    • Proposed as answer by geldinho Monday, June 01, 2009 5:38 PM
    Monday, June 01, 2009 2:23 PM
  • Its nice to hear that this seems to work for others, too. I always find it annoying, when users who found a solution don't post it... and I'm glad I could contribute to this solution.
    If you found other threads about this kind of error, you should post this solution, so that others with similiar problem find the answer quickly...
    • Proposed as answer by Ziippe_R Thursday, June 11, 2009 1:46 PM
    Monday, June 01, 2009 5:38 PM
  • geldinho u helped me so mutch!

    10Q!

    • Proposed as answer by Ziippe_R Thursday, June 11, 2009 1:46 PM
    Thursday, June 11, 2009 1:46 PM
  • I was about to give up...These steps posted above worked on my machine:

    "1. Renamed the file C:\WINDOWS\system32\spupdsvc.exe to spupdsvc_old.exe.
    2. Run the WIC install (wic_x86_enu.exe) - should install no problem. This will copy the correct spupdsvc.exe.
    3. Run .net 3.5 and other installs. Should work fine now (well did for me)."

    Get the WIC installer here:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=8e011506-6307-445b-b950-215def45ddd8&DisplayLang=en
    • Proposed as answer by guoneng_wei Tuesday, January 12, 2010 9:22 AM
    Tuesday, June 23, 2009 4:47 PM
  • I renamed the file to old but that did not work, I tried to install the WIC_x86_enu.exe but get message I already have a newer version of it on my system. Here is my error file:

     [06/28/09,22:53:09] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [06/28/09,22:53:09] WIC Installer: [2] Setup Failed on component WIC Installer
    [06/28/09,22:53:26] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [06/28/09,23:06:10] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [06/28/09,23:06:10] WIC Installer: [2] Setup Failed on component WIC Installer
    [06/28/09,23:06:26] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [06/28/09,23:16:43] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [06/28/09,23:16:43] WIC Installer: [2] Setup Failed on component WIC Installer
    [06/28/09,23:16:59] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [06/28/09,23:30:46] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [06/28/09,23:30:46] WIC Installer: [2] Setup Failed on component WIC Installer
    [06/28/09,23:31:02] WapUI: [2] DepCheck indicates WIC Installer is not installed.

    Running windows xp with service pack 3

    Still cannot get Netframework 3.5 to install.  Any other suggestions would be appreciated.  Thanks
    Monday, June 29, 2009 3:50 AM
  • This can be an issue with the permission with the ServiceModel 3.0.0.0 registry key. Find the below link for more details

    http://codekeep.net/ASPNET/code/snippets/16827/Unable-to-install-NET-Framework-30-35-VS2008-Solution/view.aspx

    Friday, November 06, 2009 5:56 AM
  • I am trying to install dotnetfx35.exe and getting errors like
    [11/18/09,12:46:05] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/18/09,12:46:05] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/18/09,12:46:23] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/20/09,17:00:04] WapUI: [2] Setup requires 339 MB of free space on System Drive, but only 233 MB is available.
    [11/20/09,17:00:35] WapUI: [2] Setup requires 339 MB of free space on System Drive, but only 233 MB is available.
    [11/20/09,17:00:37] WapUI: [2] User has decided to continue
    [11/20/09,17:01:32] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/20/09,17:01:32] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/20/09,17:01:49] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/20/09,17:12:21] WapUI: [2] User has decided to cancel
    [11/22/09,11:04:38] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/22/09,11:04:38] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/22/09,11:04:53] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/22/09,11:09:39] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/22/09,11:09:39] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/22/09,11:09:54] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/22/09,11:26:53] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/22/09,11:26:53] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/22/09,11:27:07] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/22/09,12:35:18] WapUI: [2] Setup requires 339 MB of free space on System Drive, but only 155 MB is available.
    [11/22/09,12:35:27] WapUI: [2] User has decided to cancel
    [11/22/09,13:03:25] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/22/09,13:03:25] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/22/09,13:03:40] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/22/09,13:13:15] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [11/22/09,13:13:15] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/22/09,13:13:28] WapUI: [2] DepCheck indicates WIC Installer is not installed.

    I tried to install WindowsXP-KB942288-v3-x86 but is says that it is already installed in your system
    In my system C drive has 776 MB free space.

    Please help to install dotnetFramework3.5 .

    Regards
    Priya

    • Proposed as answer by guoneng_wei Tuesday, January 12, 2010 9:17 AM
    Sunday, November 22, 2009 8:23 AM
  • thanks for Mc3RaVeN/shawneee11 ! I follow your ways of doing, now  i  already
    successfully installed this damn net3.5.

    last, let me thanks for you again !
    Tuesday, January 12, 2010 9:15 AM
  • thanks for Mc3RaVeN/shawneee11 ! I follow your ways of doing, now  i  already
    successfully installed this damn net3.5.

    last, let me thanks for you again !
    Tuesday, January 12, 2010 9:17 AM
  • try this.....

    Delete the file WMPhoto.dll
     
    Just do a search for it in the search box.
    It is some kind of log for previous versions of Net framework.
    I deleted it and any thing resembling it that came up in the serach box and net framwork loaded fine
    Friday, February 05, 2010 7:47 AM
  • I think I came up with a solution: I also had trouble installing Internet Explorer 7 and 8 and the same thing with Windows Media Player 10 and 11 (and of course .Net 3.0 and Service Pack 3).
    When searching for a solution vor the WMP error, i found this:
    http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=8007f00d&contextid=10050&originalid=8007f00d

    Renaming the spupdsvc.exe actually worked for WMP but surprisingly for all other errors, too. I have them all installed by now and I'm glad it was an quiet simple solution (although not easy to find). Maybe one of the above steps is necessary for you... i already did that, so I can't tell if it was spupdsvc.exe alone, or not. If you experience trouble with the update process after you renamed it, just rename it back...

    I hope this a help to you, when google came up with this page for you :)

    I had been searching for weeks until I found this.

    I unistalled internet explorer ages ago because I couldn't get it to work and I had given up on windows media player too.

    Such a simple fix.

    Thanks again.

    Tom
    Monday, February 08, 2010 3:37 PM
  • Hi,

     

    please try this:

     

    Cryptographic Error:

    :

    1: The following key sbould be modified:

    HKEY_L0CAL_MACHINE\SOFTWARE\policies\Microsoft\systemcertificates\Trustedpublisher\Safer REG_dword= AuthenticodeFlags

    Value = 0

    The Authenticodeflags value should be changed from 1 oder anderer Wert to 0.

     

     

    regards

     

    Thursday, March 25, 2010 9:02 AM
  • I had a similar problem installing .NET framework 3.5 SP1 over a system having 2.0 SP1  running WEPOS SP3, with WIC giving the following error(I suppose it is running in 'quiet' mode, so details were suppressed):

    [11/28/08,02:36:31] WIC Installer: [2] Setup Failed on component WIC Installer
    [11/28/08,02:36:55] WapUI: [2] DepCheck indicates WIC Installer is not installed.
    [11/28/08,03:36:16] WIC Installer: [2] Error code 1603 for this component means "Fatal error during installation.

    After searching the net many days for a suitable fix to no avail, I inspected the "dd_WIC.txt" file created by .NET framework 3.5 SP1 installer, to find the following lines:

    0.094:  C:\Windows\system32\WMPhoto.dll is Present
    0.109: FileVersion of C:\Windows\system32\WMPhoto.dll is Greater Than 6.0.5840.16388
    0.109: Condition Check for Line 3 of PreRequisite returned FALSE
    0.156: WIC Setup encountered an error:  Newer version of update is already on the system.

    So there you have it, WIC installer seemed to have failed since a newer version of WMPhoto.dll existed on my machine. I renamed the WMPhoto.dll and then tried running WIC installer and it completed succesfully. .NET framework 3.5 SP1 also installed successfully thereafter. I thereafter restored the original WMPhoto.dll(newer version.)

    Another blog gives a better procedure to remove WMPhoto.dll:
    cd c:\WINDOWS\system32
    regsvr32 /u WMPhoto.dll
    del WMPhoto.dll
    http://forums.microsoft.com/MSR/ShowPost.aspx?PostID=1629908&SiteID=37

    The question arises how the newer version of WMPhoto.dll has been installed in the machine. After comparing the original WEPOS with WEPOS after SP3 was installed, I found out that WMPhoto.dll has been installed by SP3, and is not included in the original WEPOS. Other users have also reported that they have been using XP SP3 and have experienced the error:
    "I also have windows XP servicepack 3 and same problems as the most of you, guys."
    http://forums.bigfishgames.com/posts/list/80/9939.page

    Alternatively, you can try installing WEPOS or XP(as the case maybe), installing fx3.5 and then installing SP3. This approach doesnt require any files to be deleted. I am not sure that by deleting any files, whether any agreements would be violated.


    Hope this post was of help.

    Thank you ever so much.


    This worked perfectly for me. I had tried all of the dotnetfx clean up tools, I had tried countless different methods described in forums, and only this has worked. Thank you so so so so much.
    Tuesday, April 20, 2010 1:42 AM
  • Wow thanks for the dd_wic.txt and wmphoto.dll info...this was driving me insane!!!

    I even reinstalled windows, just to run into the same thing since I installed sp3.  Oh well old install was 4 years old anyways.  Runs like new again, and with working .net goodness!  You're the man.

    Thursday, August 05, 2010 4:59 AM
  • For those experiencing the error "Setup could not verify the integrity of the file Update.inf.  Make sure the Cryptographic service is running on this computer." (STR_FAILED_INF_INTEGRITY reported in log), try this:

    regsvr32 initpki.dll

    Friday, August 20, 2010 5:39 PM
  • So there you have it, WIC installer seemed to have failed since a newer version of WMPhoto.dll existed on my machine. I renamed the WMPhoto.dll and then tried running WIC installer and it completed succesfully. .NET framework 3.5 SP1 also installed successfully thereafter. I thereafter restored the original WMPhoto.dll(newer version.)

    Another blog gives a better procedure to remove WMPhoto.dll:
    cd c:\WINDOWS\system32
    regsvr32 /u WMPhoto.dll
    del WMPhoto.dll
    http://forums.microsoft.com/MSR/ShowPost.aspx?PostID=1629908&SiteID=37
    This was the fix for me...It seems that installing XP SP3 prior to DotNet will cause Windows to only update WMPhoto.dll and not the other prerequisites. This is just plain dumb...Of course, I am running this on Window Fundamentals for Legacy PC's but it appears to have the same effect either way.

    I found your solution right when I was on my 40th attempt and finally combing thru the INI file within the WIC installer! :)

    - Thank you for your post. Just wanted to give credit where due, as you explain this nicely!
    Thursday, February 03, 2011 1:14 AM
  • Hi I know i'm late in replying but i had the same issue when trying to update .net 3.5.1 sp1

    Fix - Rename wmphoto32.dll ==> wmphoto32.dll.old ==> run dotnet3.5sp1fix again or use windows update.

    The .net update creates a new (older version) wmphoto32.dll - i believe this should be ok to leave.

    Monday, March 28, 2011 6:11 AM