none
Please HELP.. Kode error HRESULT 0xc8000222 RRS feed

  • Question

  • Please help .net 4.0 Installation error with code 0xc8000222.. i already collect the log

    Here : https://skydrive.live.com/?cid=75c9fac7ba9b2069#cid=75C9FAC7BA9B2069&id=75C9FAC7BA9B2069!105

    Please help..

    Best Regards..

    Monday, June 4, 2012 1:30 PM

Answers

  • Follow these steps exactly:

    Before trying to install .NET Framework 4.0, execute this command from an ELEVATED Command Prompt provided by the .NET Framework Team:

    "This issue is likely caused by a bad ACL on assembly\tmp folder. After installing updates, the ACL propagates to installed assembly folders in both 4.0 & legacy GAC.  If those updates were installed by WU or another user, the propagated ACL will prevent install of the same assembly by the current user.

    A work around would be to reset the ACL on GAC dirs.

    for /F %D in ('dir %WINDIR%\assembly %WINDIR%\Microsoft.NET\assembly /s /b /a:d') do takeown /F %D && icacls %D /reset /T"

    After running that command, follow these steps:

    Please follow these instructions exactly:

    1. Download a fresh copy of the standalone installer for .NET Framework 4.0:

    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17718

    2. Also, clear your %temp% directory and disable your AV software.

    The %temp% directory is a reference to the Temp folder associated with the current user. To clear it, do the following:

    Sign on to your system with the Administrator user account you will use to run the installer. Click the Start Orb and type %temp% in the search box. The search results will show the Temp folder you want. Click on the Temp folder to open it in Windows Explorer, then delete the entire contents.

    3. Run the standalone installer from step 1 As Administrator.

    Note: Just using an administrator account is NOT enough. To activate full privileges, you must right-click the installer, then select Run as administrator.

    If the install fails, provide complete install logs as follows:

    Please collect your install logs with this:

    http://www.microsoft.com/downloads/details.aspx?FamilyID=E0DA314F-6216-4A18-BC6B-7D29CF83AF20&displaylang=e&displaylang=en

    After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like SkyDrive, and post the link here.

    You can also try these:

    You can try these from Alexander Sun in another thread:

    I recommend you try the suggestions listed here:http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/060c304d-d9c7-41f0-8650-80489f7ebf9a

    Download and try System Update Readiness Tool for Windows 7 for x64-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=20858

    Download and try System Update Readiness Tool for Windows 7 for x32-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=3132

    If all these alternatives keep failing for you, you'll need to consider the "final solution", reinstalling your OS.

    Monday, June 4, 2012 3:25 PM

All replies

  • please help.. I failed on installation here is my log.. Please help.. thx a lot..

    Here : https://skydrive.live.com/?cid=75c9fac7ba9b2069#cid=75C9FAC7BA9B2069&id=75C9FAC7BA9B2069!105

    Sunday, June 3, 2012 3:51 PM
  • Follow these steps exactly:

    Before trying to install .NET Framework 4.0, execute this command from an ELEVATED Command Prompt provided by the .NET Framework Team:

    "This issue is likely caused by a bad ACL on assembly\tmp folder. After installing updates, the ACL propagates to installed assembly folders in both 4.0 & legacy GAC.  If those updates were installed by WU or another user, the propagated ACL will prevent install of the same assembly by the current user.

    A work around would be to reset the ACL on GAC dirs.

    for /F %D in ('dir %WINDIR%\assembly %WINDIR%\Microsoft.NET\assembly /s /b /a:d') do takeown /F %D && icacls %D /reset /T"

    After running that command, follow these steps:

    Please follow these instructions exactly:

    1. Download a fresh copy of the standalone installer for .NET Framework 4.0:

    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17718

    2. Also, clear your %temp% directory and disable your AV software.

    The %temp% directory is a reference to the Temp folder associated with the current user. To clear it, do the following:

    Sign on to your system with the Administrator user account you will use to run the installer. Click the Start Orb and type %temp% in the search box. The search results will show the Temp folder you want. Click on the Temp folder to open it in Windows Explorer, then delete the entire contents.

    3. Run the standalone installer from step 1 As Administrator.

    Note: Just using an administrator account is NOT enough. To activate full privileges, you must right-click the installer, then select Run as administrator.

    If the install fails, provide complete install logs as follows:

    Please collect your install logs with this:

    http://www.microsoft.com/downloads/details.aspx?FamilyID=E0DA314F-6216-4A18-BC6B-7D29CF83AF20&displaylang=e&displaylang=en

    After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like SkyDrive, and post the link here.

    You can also try these:

    You can try these from Alexander Sun in another thread:

    I recommend you try the suggestions listed here:http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/060c304d-d9c7-41f0-8650-80489f7ebf9a

    Download and try System Update Readiness Tool for Windows 7 for x64-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=20858

    Download and try System Update Readiness Tool for Windows 7 for x32-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=3132

    If all these alternatives keep failing for you, you'll need to consider the "final solution", reinstalling your OS.

    Monday, June 4, 2012 3:25 PM
  • Hi SaintOfWarrior,

    How is your issue now?

    Does pvdg42's post help you resolve your issue?

    I'm doing a follow up here.

    Thanks,


    Barry Wang [MSFT]
    MSDN Community Support | Feedback to us

    Thursday, June 14, 2012 9:30 AM
    Moderator
  • Follow these steps exactly:

    Before trying to install .NET Framework 4.0, execute this command from an ELEVATED Command Prompt provided by the .NET Framework Team:

    "This issue is likely caused by a bad ACL on assembly\tmp folder. After installing updates, the ACL propagates to installed assembly folders in both 4.0 & legacy GAC.  If those updates were installed by WU or another user, the propagated ACL will prevent install of the same assembly by the current user.

    A work around would be to reset the ACL on GAC dirs.

    for /F %D in ('dir %WINDIR%\assembly %WINDIR%\Microsoft.NET\assembly /s /b /a:d') do takeown /F %D && icacls %D /reset /T"

    After running that command, follow these steps:

    Please follow these instructions exactly:

    1. Download a fresh copy of the standalone installer for .NET Framework 4.0:

    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17718

    2. Also, clear your %temp% directory and disable your AV software.

    The %temp% directory is a reference to the Temp folder associated with the current user. To clear it, do the following:

    Sign on to your system with the Administrator user account you will use to run the installer. Click the Start Orb and type %temp% in the search box. The search results will show the Temp folder you want. Click on the Temp folder to open it in Windows Explorer, then delete the entire contents.

    3. Run the standalone installer from step 1 As Administrator.

    Note: Just using an administrator account is NOT enough. To activate full privileges, you must right-click the installer, then select Run as administrator.

    If the install fails, provide complete install logs as follows:

    Please collect your install logs with this:

    http://www.microsoft.com/downloads/details.aspx?FamilyID=E0DA314F-6216-4A18-BC6B-7D29CF83AF20&displaylang=e&displaylang=en

    After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like SkyDrive, and post the link here.

    You can also try these:

    You can try these from Alexander Sun in another thread:

    I recommend you try the suggestions listed here:http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/060c304d-d9c7-41f0-8650-80489f7ebf9a

    Download and try System Update Readiness Tool for Windows 7 for x64-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=20858

    Download and try System Update Readiness Tool for Windows 7 for x32-based Systems:http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=3132

    If all these alternatives keep failing for you, you'll need to consider the "final solution", reinstalling your OS.

    ('dir %WINDIR%\assembly %WINDIR%\Microsoft.NET\assembly /s /b /a:d') do takeown /F %D && icacls %D /reset /T


    I'm not that... good with computers, could you please explain this slightly more for me?

    Wednesday, July 4, 2012 2:23 PM
  • You are new to this thread, and I have no idea what your issue is, so I STRONGLY suggest you start a new thread and describe your problem in detail if you want best results from this forum.

    Posting in this already answered thread guarantees that VERY few forum readers will even see your post.

    Assuming you are trying to follow my steps for installing .NET Framework 4.0, here is what you need to do to run the command you quoted.

    Copy this command to your clipboard:

    for /F %D in ('dir %WINDIR%\assembly %WINDIR%\Microsoft.NET\assembly /s /b /a:d') do takeown /F %D && icacls %D /reset /T

    Open a Command Window on your system As Administrator (techniques vary depending on Windows version).

    In the Command Window, open the Edit menu by right clicking the icon at the left of the title bar. Select Edit->Paste.

    With the command above at your prompt, hit Enter.

    Wednesday, July 4, 2012 3:12 PM
  • I'm having the same problem as the people above; tried all of the recommended fixes and still get the same error message HRESULT 0xc8000222.  Here is a link to my install log: <iframe src="https://skydrive.live.com/embed?cid=4D7527DCB80E3C37&resid=4D7527DCB80E3C37%21105&authkey=ABH0dRhLSOgc0q4" width="98" height="120" frameborder="0" scrolling="no"></iframe>

    Hope you can give me an answer that works for me!

    Tuesday, October 30, 2012 9:59 PM
  • Hello, Uncle Al.

    Can you please start a new thread so many readers will see you post? Posting to an old, already answered thread ensures that most forum readers will never see your post.

    Thank you for your cooperation.

    When you do start a new thread, please provide a working link to your logs. When I tried the link you gave, I got "This item wont load".

    Tuesday, October 30, 2012 11:40 PM
  • i followed the steps exactly the same but i still get the same error

    here is a link to my log:

     https://skydrive.live.com/embed?cid=49905ED5A527C8F2&resid=49905ED5A527C8F2%21136&authkey=ABn-tTZeBI5o1rg
    Sunday, September 1, 2013 8:25 PM
  • Hello, 3badee.

    Can you please start a new thread so many readers will see you post? Posting to an old, already answered thread ensures that most forum readers will never see your post.

    Thank you for your cooperation.

    Monday, September 2, 2013 7:58 PM