none
.NET Framework will not start..... RRS feed

  • Question

  • When pc is started, .NET Framework v2.0.50727_x86 will not start/could not be loaded. When l attempt to start this, receive error 14001. Have tried to start this service from services.msc and that error message is the one received. yet upon attempting to re install, will not do this because of conflicting w/previous version.
    Tuesday, December 27, 2011 12:23 AM

Answers

  • Here is what I did. You have to change the "D:\Test\" to match the location of the tool on your computer.

     

    Thursday, December 29, 2011 6:40 PM

All replies

  • Maybe you can refer to this article(I'm sorry it is in Chinese but you got Google Translate tool).

    http://soho-hsh.blogspot.com/2011/03/net-framework.html


    My blog: http://soho-hsh.blogspot.com
    Tuesday, December 27, 2011 5:59 AM
  • Hi steveothehhighlander,

    Thanks for your post!

    You can repair .NET Framework 2 using the following method:How to manually remove and then reinstall the.NET Framework 2.0

    http://support.microsoft.com/kb/908077

    For more information, you can use err.exe tool in the following link which can help the code error translation:

     http://blogs.msdn.com/b/astebner/archive/2008/06/17/8611734.aspx

    Hope it helps!

    Best Regards,


    Cathy Kong [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

    Tuesday, December 27, 2011 8:51 AM
    Moderator
  • Please tell us your Windows version. Before attempting to repair/reinstall .NET Framework 2.0, we need to know if it is built into your Windows (as it is in Vista and 7), or an added program (XP).

    Removal/reinstallation may work in Windows XP, but cannot be done in Vista or Windows 7. If you do have Vista or Windows 7, this is the procedure to use:

    http://blogs.msdn.com/b/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

    Tuesday, December 27, 2011 4:42 PM
  • Windows XP Media Center 
    Tuesday, December 27, 2011 11:37 PM
  • Windows XP Media Center . l have tried everything l can think of to solve this problem, nothing works. lt's clearly above my expertise. 
    Wednesday, December 28, 2011 1:40 AM
  • please note; in services.msc, the first entry  is .NET Runtime Optimization Service v2.0.50727_X86 and when l attempt to start service, error message received: Could not start .NET Runtime Optimization Service v2.0.50727_X86 service on local computer

     

    Error 3: The system cannot find the specified path.

     

    Thanks!

    Wednesday, December 28, 2011 2:45 AM
  • Please run this verification tool to check installed .NET Frameworks:

    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

    Post the first 20 lines and last 20 lines of tool output here.

    Wednesday, December 28, 2011 2:28 PM
  • unable to run. when l attempt to use, the "product to verify" box is not highlighted. Yet, upon checking in the add/remove  section, it states >NET framework 3.5 is there
    Wednesday, December 28, 2011 11:54 PM
  • Per the readme, you can use this command to have the tool show all framework versions, whether of not detected:

    netfx_setupverifier.exe /q:a /c:"setupverifier.exe /a"

    As your system shows.NET Framework 3.5 is installed, select that and post results as requested previously.

    Thursday, December 29, 2011 5:52 AM
  • Hi steveothehighlander,

    If you cannot use the verification tool to check the installed .NET Frameworks, please try use the following method:

    http://msdn.microsoft.com/en-us/kb/kbarticle.aspx?id=318785

    Hope it helps!


    Cathy Kong [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

    Thursday, December 29, 2011 8:19 AM
    Moderator
  • Thanks. Question; where do l put this command:  netfx_setupverifier.exe /q:a /c:"setupverifier.exe /a" in start/run or my browser?
    Thursday, December 29, 2011 12:15 PM
  • thanks! in regedit, under Microsoft/.NET framework, it has several listed: v1.0, v1.0.3705

    all the way up to v3.0. However, upon clicking these, they all say "SBS Disabled." Upon right clicking this, under permissions, l do not know what to do, and do not want to harm p/c

    Thank You All for your help. Together, we'll get to the bottom of this!

    Thursday, December 29, 2011 12:28 PM
  • You run the command from the prompt in the command window.

    It's been a long time since I used XP, but you should find Command Prompt in your start menu under Accessories.

    At the command prompt, you type the command I gabe you from the readme, preceded by the full path to netfx_setupverifier.exe.

    For example, on my system, I extracted netfx_setupverifier.exe to D:\Test. So, at the command prompt, I typed:

    D:\Test\netfx_setupverifier.exe /q:a /c:"setupverifier.exe /a"then hit the Enter key.

    I see Cathy Kong has provided you an alternative. Unfortunately, I do not know what the message "SBS Disabled" means in your context, so I will leave it to her to continue with that. 

    Thursday, December 29, 2011 2:33 PM
  • thank you, but is that with or without quote marks?
    Thursday, December 29, 2011 3:50 PM
  • l copied , went to command prompt, then pasted, hit enter and system said "could not find the specified path" 
    Thursday, December 29, 2011 3:55 PM
  • Here is what I did. You have to change the "D:\Test\" to match the location of the tool on your computer.

     

    Thursday, December 29, 2011 6:40 PM
  • Hi Hi steveothehighlander,

    Thanks for your feedback!

    I think your .NET Framework is not installed successfully. I recommend you to remove the .NET Framework and reinstall it again.

    Please refer to the following blog to remove the version of .NET Framework which you want to install:

    http://blogs.msdn.com/b/astebner/archive/2006/05/30/611355.aspx

    Then please try to reinstall it and see if it helps.

    For more information, you can refer to http://support.microsoft.com/kb/824643/en-us

    Hope it helps!

    Best Regards,

     


    Cathy Kong [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

    Friday, December 30, 2011 7:10 AM
    Moderator