none
The DNS client is not configured to point only to the internal IP address of the server? RRS feed

  • Question

  • I've an SBS 2011 server that has BPA installed. A scan reveals the message in the title. I have checked tcp/ip v4 settings and have the servers static Ip set as the primary DNS and 127.0.0.1 as the alternate as indicated by various solutions to the problem.

    I still get this issue.

    Output from ipconfig /all

    C:\Windows\system32>ipconfig /all

    Windows IP Configuration

       Host Name . . . . . . . . . . . . : PSSBS2011
       Primary Dns Suffix  . . . . . . . : primesoftnz.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : Yes
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : primesoftnz.local

    Ethernet adapter Local Area Connection:

       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
       Physical Address. . . . . . . . . : 00-0C-29-3C-71-7E
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::6ca8:f626:b5a1:b6c3%10(Preferred)
       Link-local IPv6 Address . . . . . : fe80::c48c:2663:3206:2a71%10(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.0.0.33(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.0.0.254
       DHCPv6 IAID . . . . . . . . . . . : 234884137
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-FF-0E-06-00-0C-29-3C-71-7E

       DNS Servers . . . . . . . . . . . : fe80::6ca8:f626:b5a1:b6c3%10
                                           ::1
                                           10.0.0.33
                                           127.0.0.1
       Primary WINS Server . . . . . . . : 10.0.0.33
       NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{677F4925-BC54-4D5A-80E2-B160F829A255}:

       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    Tunnel adapter Local Area Connection* 9:

       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    C:\Windows\system32>

    I don't know why I'm getting two ipv6 addresses and wonder if that has something to do with it?

    Can someone point me in the right direction?

    Monday, February 4, 2013 8:16 PM

All replies

  • Hello,

    Why

     dont you just disable the IP V6 Protocol if not in use.

    • Proposed as answer by AsimPervaz Tuesday, September 17, 2013 9:54 AM
    Wednesday, May 15, 2013 12:41 PM
  • Hello,

    I thing you have IPV6 is Enable you need to disable the IPV6.If you have any DNS server Not Put the 127.0.0.1 Put the DNS server IP on DNS.


    Dipendra Paudel

    Monday, June 17, 2013 12:27 PM