NXP OM5577 NFC board driver broken on 10586

Question

Hi there,

I'm trying to use the NXP OM5577 NFC demo board for RaspberryPi.
Board is supposed to be tested as per https://ms-iot.github.io/content/en-US/win10/SupportedInterfaces.htm#NFC

I had it recognized by the provided driver with the RTM build but it fails to load the driver on 10586.

This is what I get by installing the driver as documented:

ID : ACPI\PN7120\2&DABA3FF&0
StatusCode : 25175040
ProblemCode : 28

Anyone knows how to get it working?

Thank you.

Edoardo.

Answer 1

Try with the newly released (not the earlier leaked version) 10586 RTM.

https://ms-iot.github.io/content/en-US/Downloads.htm

---

riclh

Answer 2

Hi there.

I have the same problem.

Original Image from NXP works with 10240.

But i need WinIot 10586 to get my TP-Link WN725N running.

I Installed the mentioned 10586 RTM.

7120 Device not running.

Anyone got it running ?

mfg

Smithsonian 1974

Answer 3

Hi Edoardo, there was a regression in the OS that prevents devcon.exe from installing the driver on 10586. We're working to fix it in a future release, in the meantime though below is a modified INF that will work-around the problem. Just copy+paste it using Notepad to replace your existing NXPPN7120.INF file and follow all the instructions as normal:

;/*++
;
; Copyright (c) Microsoft Corporation.  All rights reserved.
;
; Module Name:
;    NXPPN7120.inf
;
; Abstract:
;    INF file for installing NXP's NCI based NFC controller
;
;--*/

[Version]
Signature="$Windows NT$"
Class=Proximity
ClassGuid={5630831C-06C9-4856-B327-F5D32586E060}
Provider=%ManufacturerName%
DriverVer=06/21/2006,10.0.10572.1000

[Manufacturer]
%ManufacturerName%=Standard,NTarm

[Standard.NTarm]
%DeviceName%=MyDevice_Install, ACPI\PN7120

[SourceDisksNames]
1=%DiskName%

[SourceDisksFiles]

; =================== UMDF Device ==================================

[DefaultInstall]

[MyDevice_Install.NT]

[MyDevice_Install.NT.hw]

[MyDevice_Install.NT.Services]
AddService=WUDFRd,0x000001fa,WUDFRD_ServiceInstall

[MyDevice_Install.NT.CoInstallers]
AddReg=CoInstallers_AddReg

[MyDevice_Install.NT.Wdf]
UmdfService=NxpNfcPn7120ClientDriver,NxpNfcPn7120ClientDriver_Install
UmdfServiceOrder=NxpNfcPn7120ClientDriver
UmdfDirectHardwareAccess=AllowDirectHardwareAccess
UmdfFileObjectPolicy=AllowNullAndUnknownFileObjects
UmdfImpersonationLevel=Impersonation

[NxpNfcPn7120ClientDriver_Install]
UmdfLibraryVersion=2.0.0
ServiceBinary=%12%\UMDF\MSNfcI2C547.dll
UmdfExtensions=NfcCx0102

[WUDFRD_ServiceInstall]
DisplayName=%WudfRdDisplayName%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\WUDFRd.sys

[CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"WUDFCoinstaller.dll"

[DestinationDirs]

[ControlFlags]
ExcludeFromSelect=*

; =================== Generic ==================================

[Strings]
ManufacturerName="NXP Semiconductors"
DiskName="NxpNfcPn7120ClientDriver Installation Disk"
WudfRdDisplayName="Windows Driver Foundation - User-mode Driver Framework Reflector"
DeviceName="NxpNfcPn7120ClientDriver Device"

Answer 4

Great Job.

Now its working.

Thanx for help

Greets

Frank Schmidt

Answer 5

This Solution also helped me out, an my Raspberry Pi 2, So thanks,

 but a bit of warning on the Raspberry Pi 3 with build 10.0.14279.1000

installing the driver causes an inaccessible boot device !!

Hence I needed to do an re-Flash of the MicroSD.

Meanwhile back on RPi2, I did not test new build on RPi2

Greetings Marc

Answer 6

RPi2 with build 10.0.14279.1000 gives error 

StatusCode : 25175040

ProblemCode : 28

Anyone got a fix for build  10.0.14279.1000? 

Answer 7

Yes, I had the revised inf in this post working on 10586 but doing the same actions on 14393 results in a failure to find the proximity device.

The official NXP OM5577 drivers and instructions are still not functional and I was hoping this fix would still work.

I bought this device because it is specifically listed on the compatibility list:
https://developer.microsoft.com/en-us/windows/iot/docs/hardwarecompatlist#NFC

Is there any progress on getting this proximity device actually working on Windows 10 IoT Core?

Answer 8

Yes, I had the revised inf in this post working on 10586 but doing the same actions on 14393 results in a failure to find the proximity device.

The official NXP OM5577 drivers and instructions are still not functional and I was hoping this fix would still work.

I bought this device because it is specifically listed on the compatibility list:
https://developer.microsoft.com/en-us/windows/iot/docs/hardwarecompatlist#NFC

Is there any progress on getting this proximity device actually working on Windows 10 IoT Core?

We also purchased the OM5577 based on the hardware compatibility list for the Raspberry Pi 3 and require this to be actually supported. Projects are paused until resolved.