fatal error U1052: file 'C:\WINCE700\public\common\oak\misc\sources.ReleaseType_PLATFORMCOMMON' not found RRS feed

  • Question

  • I am new to WINCE.... I have selected TI BSP for the compilation of my OS DESIGN project... and during the time of building I am facing this error

    makefile.def: Including C:\WINCE700\public\common\oak\misc\sources.ReleaseType_PLATFORMCOMMON
    BUILD: [02:0000000560:ERRORE] Error(s) in directory "C:\WINCE700\platform\common\src\soc\Freescale\common_fsl_v1\pmic\MC13783_FSL_V1\SDK\".
    BUILD: [02:0000000561:ERRORE] C:\WINCE700\public\common\oak\misc\makefile.def(505) : fatal error U1052: file 'C:\WINCE700\public\common\oak\misc\sources.ReleaseType_PLATFORMCOMMON' not found

    sources.ReleaseType_platformcommon file is missing....... 

    I am unable to find it on net too.. If I get the code of this file from some where then i can copy and paste it and i may fix the problem......

    So, please help me to solve the problem....

    Tuesday, October 22, 2013 10:49 AM

All replies

  • i believe you have multiple BSP and the error is from Freescale BSP. but yours is TI BSP.

    can you try "clean sysgen" in the advance build option?

    if still happened. you can find a "dirs" file in C:\WINCE700\platform\common\src\soc path.OPen it, you can find an entry "DIRS=*"

    just replace it with your BSP soc. for ex) DIRS=COMMON_TI_V1

    which can avoid building other SOC also reduce your build time when you perform "Rebuild current BSP and subprojects"

    Please mark as answer, if it is correct.
    Please vote,if it is helpful post.
    All the Best

    Tuesday, October 22, 2013 11:03 AM
  • I don't think that will solve the problem.   The problem seems to be that an important file is missing.   So short of removing Platform\Common completely this error will persist.   Not to mention that this solution assumes that the OP only plans to ever build for the TI chip.

    sources.ReleaseType.platformcommon should be in that folder.   If it is not, one way to fix this is to copy sources.ReleaseType.platform and change platform to platcomm.

    Salithia, the question that you should ask yourself is how did this file disappear?

    Bruce Eitman (eMVP)
    Senior Engineer
    Bruce.Eitman AT Eurotech DOT com
    My BLOG

    Eurotech Inc.

    Tuesday, October 22, 2013 2:12 PM
  • A better way, if you want to speed up the build and still keep the option of building for multiple SOCs, is this:

    Same is valid for WEC2013 and CE 6.

    Good luck,

    Michel Verhagen, eMVP
    Check out my blog:

    Microsoft Embedded Partner
    Consultancy, training and development services.

    Wednesday, October 23, 2013 6:04 AM
  • Nice blog Michel.

    Please mark as answer, if it is correct.
    Please vote,if it is helpful post.
    All the Best

    Wednesday, October 23, 2013 6:53 AM