none
S3C2413 Board setup for wince 6.0 RRS feed

  • Question

  • hiiiiiiii
    i am trying setup of s3c2413 board for wince 6.0 but i found some errors.

    +-----------------------------------------------+
    | S3C2412A USB Downloader ver R0.1 (2006/9/27)  +
    +-----------------------------------------------+
    mSDR
    MPLL=200.00MHz, ARMCLK=200.00MHz (1:2:4), HCLK=100.00MHz, PCLK=50.00MHz

    USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
    FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
    NOTE: 1. Power off/on or press the reset button for 1 sec
             in order to get a valid USB device address.
          2. For additional menu, Press any key.

    >Power-on Reset
    USB host is not connected yet.
    USB host is connected. Waiting a download.

    Now, Downloading [ADDRESS:30038000h,TOTAL:258058]
    RECEIVED FILE SIZE:  258058
    (813.6KB/S,0.3S)
    Now, Checksum calculation
    Download O.K.


    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Aug 28 2012 11:55:51
    WinCE Bootloader for Samsung SMDK2413 Version 1.0 Built Aug 28 2012

    ----------------------Bootloader Settings---------------------
     Clock values in EBOOT.
     [FCLK=200000000, HCLK =100000000, PCLK=50000000]Hz

    -----------------------Bootloader Function Init---------------------

    InitDisplay
    InitUSB
    BP_Init

    Eboot
    NAND BASE=0xb0e00000
    NAND Read ID...VALID NAND FLASH. ID TESTED OK(ec76).
    NUMBLOCKS : 512(0x200), SECTORSPERBLOCK = 256(0x100), BYTESPERSECTOR = 512(0x200)
    NUMBLOCKS : 512(0x200), SECTORSPERBLOCK = 256(0x100), BYTESPERSECTOR = 512(0x200)
    wNUM_BLOCKS : 512(0x200)

    ---------End of Nand Flash Driver Settings-----------

    +TOC_Read.
    Press [ENTER] to download image stored on boot media, or [SPACE] to enter boot monitor.

    Initiating image download in 0 seconds.
    Starting auto-download ...
    +OEMVerifyMemory.
    dwStartAddr =0x0, dwLength =0x4
    Stepldr image
    +OEMVerifyMemory.
    dwStartAddr =0x0, dwLength =0x4
    Stepldr image
    ReadOSImageFromBootMedia: ERROR_INVALID_ADDRESS: (address=0x0, sectors=0x0, launch address=0x0)...
    OEMPlatformInit ERROR: Failed to load kernel region into RAM.

    so how to solve these problem .......

    • Moved by Sean LimingMVP Monday, February 15, 2016 3:16 AM Windows CE question
    Tuesday, August 28, 2012 7:25 AM

Answers

All replies