none
Secure boot logo test RRS feed

  • Question

  •  I try to pass this test it fail   .The mesage is:

    are not equal (0,0) after exitbootservices() attenting to call getvariable() on an existing variable with attributes "NV,BS" should fail

    Friday, May 10, 2013 10:07 PM

Answers

  • Your system BIOS has a bug and does not meet the Windows 8 Hardware Certification Requirements.  We recommend that you contact your system or BIOS vendor and have them provide a fixed BIOS.
    Saturday, May 11, 2013 1:00 AM

All replies

  • The Expectation of the test is to query the currentpolicy variable and expect it to be not present.

    But on your machine , Getvariable() succeeded i.e. currentpolicy is already set.

    On which machine, you are running this? Which is the firmware ?

    Saturday, May 11, 2013 12:57 AM
  • Your system BIOS has a bug and does not meet the Windows 8 Hardware Certification Requirements.  We recommend that you contact your system or BIOS vendor and have them provide a fixed BIOS.
    Saturday, May 11, 2013 1:00 AM
  • It running on the SUT and the firmware is 2.7  mainboard ECS with  embeded controller version 255.255.

    The last  bios version is : 11/5/2012

    And  BIOS vendor indicates that my SUT (system under test) requires video UEFI READY for to pass that test.

    what  parametres on BIOS about boot secure  i must to change ?

    Thursday, May 16, 2013 5:54 PM