none
Multiple processor group device testfails at Validate mutiple groups exist step RRS feed

  • Question

  • Multiple processor group device test fails at Validate multiple groups exist step

    Configure system for multiple groups step passes  & it sets following parameters

    Command succeeded: bcdedit.exe /set groupsize 1

    Command succeeded: bcdedit.exe /set maxgroup on

    Command succeeded: bcdedit.exe /set groupaware on

    ValidateMultipleGroupsExist fails with following error

    - Failure: Expected more than one active processor group, but found only one.

     File:   testsrc\basetest\topology\groupsize\groupsize.cpp Line: 102
    Error Type:   HRESULT
    Error Code:   0x0
    Error Text:   The operation completed successfully.

    Verify the system is configured into multiple active processor groups

    Fail
    Repro:   groupsize.exe -ValidateMultipleGroupsExist

    I have following processor configuration :

    I tried to run this test after manually setting groupsize on node with below commands

    bcdedit.exe /set groupsize 1

    bcdedit.exe /set maxgroup on

    bcdedit.exe /set groupaware on

    With this my test goes in long waiting queue & does not start only.

    Please advise me so that I can run this test successfully 

    Thursday, January 28, 2016 1:03 PM

All replies

  • Please check the number of CPU cores in your test PC. This test requires a CPU with minimum 4 logical processors.
    Monday, February 22, 2016 1:36 PM