none
HLK 1803 test fail for item: Display Monitor Modes - Check EDID support RRS feed

  • Question

  • hi


    When use HLK: 10.17134.1 to test "Display Monitor Modes - Check EDID support" will fail

    but use version:1709 test result was Pass, How can I solve this problem?

    HLK: 10.17134.1

    Windows10: 17134.1

    FOD: https://go.microsoft.com/fwlink/p/?LinkId=873017

    error message as below:

    Message 5/6/2018 7:21:29.531 PM Connector Type: HDMI

    Message 5/6/2018 7:21:29.664 PM Adapter Name: \\.\DISPLAY1
    Adapter String: Radeon RX 580 Series
    Adapter ID: PCI\VEN_1002&DEV_67DF&SUBSYS_05191043&REV_E7

    Message 5/6/2018 7:21:29.664 PM Monitor Name: \\.\DISPLAY1\Monitor0
    Monitor String: ASUS VC279
    Monitor Interface Path: \\?\DISPLAY#AUS27C4#5&2d7c27d3&2&UID265#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}

    Error 5/6/2018 7:21:29.665 PM Monitor \\.\DISPLAY1\Monitor0 fails to support required resolution.
    Established timings EDID byte 23h, bit 5, 640 x 480 at 60 Hz progressive

    File:   windows\test\graphics\base\tests\ccdapi\minimumdisplayspec\display.monitor.modes.cpp Line: 118
    Error Type:   NT_STATUS
    Error Code:   0x80004005
    Error Text:   Error 0x80004005
    Error 5/6/2018 7:21:29.666 PM Monitor \\.\DISPLAY1\Monitor0 fails to support required resolution.
    Established timings EDID byte 23h, bit 0, 800 x 600 at 60 Hz progressive

    File:   windows\test\graphics\base\tests\ccdapi\minimumdisplayspec\display.monitor.modes.cpp Line: 134
    Error Type:   NT_STATUS
    Error Code:   0x80004005
    Error Text:   Error 0x80004005
    Error 5/6/2018 7:21:29.666 PM Monitor \\.\DISPLAY1\Monitor0 fails to support required resolution.
    Established timings EDID byte 24h, bit 3, 1024 x 768 at 60 Hz progressive

    File:   windows\test\graphics\base\tests\ccdapi\minimumdisplayspec\display.monitor.modes.cpp Line: 150
    Error Type:   NT_STATUS
    Error Code:   0x80004005
    Error Text:   Error 0x80004005
    Message 5/6/2018 7:21:29.666 PM 00 00 00 00 00 00 00 00

    Thursday, May 17, 2018 7:32 AM

All replies