none
Platform builder image error RRS feed

  • Question

  • Developing a platform builder image for WinCE 7 on a Karo TX6 and get this error coming out of the com port.

     PID:00400002 TID:07450026 CSDDevice::SDSynchronousBusRequest_I  K: Request timed out. !!!!!!!!!!!!!!!

    Wondered how I could try to narrow this error down.. do I need to debug the OS or the application that is running on the system.

    Friday, July 19, 2019 1:51 PM

Answers

  • This is a driver issue, so you'll need to debug the driver. For this you will need Platform Builder. Set a breakpoint on that line and go from there.

    Most likely an SDIO device is not responding in a timely manner.


    Good luck,

    Michel Verhagen, eMVP
    Check out my blog: https://guruce.com/blog

    GuruCE
    Microsoft Embedded Partner
    NXP Proven Partner
    https://guruce.com
    Consultancy, training and development services.

    Interested in WEC on i.MX6?
    Get the only 100% stable and best performing i.MX6 BSP for WEC7 and WEC2013 here: https://guruce.com/imx6

    Sunday, July 21, 2019 8:35 PM
    Moderator