none
windows ce 6 installation does not complete RRS feed

  • Question

  • I used Ethernet cable to download win ce 6 os image into vdx 6354 but it won't complete!

    After I choose load os image from.... using static ip (and device monitor which I pluged manually went black ), when I press attach device to vs 2005 download process starts. Unfortunately after completion of download process nothing happens for about 10 secs and then device restart to boot menu, then if I select load from local storage previous windows came out! What should I do then?

    Additional details :

    I did exactly what device manual and win ce 6 professional wiley book said without any mid error.

    Sunday, October 19, 2014 6:55 PM

All replies

  • Did you get any debug message after that?

    Please mark as answer, if it is correct.
    Please vote,if it is helpful post.
    Vinoth.R

    http://vinoth-vinothblog.blogspot.com
    http://www.e-consystems.com/windowsce.asp

    Thursday, October 23, 2014 9:16 AM
  • no debug messages.

    the static ip download starts after I choose load os using static ip and then a black screen appears. when download finishes nothing happens after 10-20 seconds there will be a automatic reset  and when I choose load os image from local storage using internal hard it loads previous existing version, and when I load from usb device it shows a screen with windows ce 6 text on it,that make my device reset after 1 minute!

    I find it out after download completes there must be a new windows ce screen without restarting!

    Friday, October 24, 2014 5:10 PM
  • I have got these debug messages for VDX-6354. Can anybody help me please?

    PB Debugger The Kernel Debugger is waiting to connect with target.
    PB Debugger The Kernel Debugger has been disconnected successfully.
    PB Debugger The Kernel Debugger is waiting to connect with target.
    
          0 PID:0 TID:0 CEPC Firmware Init
          0 PID:0 TID:0 RTC - Status Reg B - 0x02
          0 PID:0 TID:0 g_dwCPUFeatures = 00000111
          0 PID:0 TID:0 Looking for rom chain
          0 PID:0 TID:0 Rom chain NOT found
          0 PID:0 TID:0 Firmware Init Done.
          0 PID:0 TID:0 Booting Windows CE version 6.00 for (x86)
          0 PID:0 TID:0 
    
    Old or invalid version stamp in kernel structures - starting clean!
    
          0 PID:0 TID:0 Configuring: Primary pages: 55362, Secondary pages: 0, Filesystem pages = 27681
          0 PID:0 TID:0 
    Booting kernel with clean memory configuration:
    
          0 PID:0 TID:0 Memory Sections:
          0 PID:0 TID:0 [0] : start: 826a2000, extension: 0001c000, length: 0d842000
          0 PID:0 TID:0 X86Init done, OEMAddressTable = 80226d20, RAM mapped = 10000000.
         11 PID:400002 TID:410002 Exception 'Access Violation' (14): Thread-
    
    Id=00410002(pth=8feff024), Proc-Id=00400002(pprc=82617800) 'NK.EXE', VM-active=00400002(pprc=82617800) 'NK.EXE'
    
         11 PID:400002 TID:410002 PC=00000000(???+0x00000000) RA=c00429f5(hd.dll+0x000029f5) SP=d001fb10, BVA=00000000
         12 PID:400002 TID:410002 Eax=d001fb9c Ebx=826192e0 Ecx=d001fb9c Edx=d001fb9c
         12 PID:400002 TID:410002 Esi=00000000 Edi=00000001 Ebp=d001fb58 Esp=d001fb10 Eip=00000000
         12 PID:400002 TID:410002 CS=0019 DS=0040 ES=0040 SS=0021 FS=0060 GS=0000
         12 PID:400002 TID:410002 URtlDispatchException: returning failure. Flags=0
         12 PID:400002 TID:410002 
    
    Unhandled exception c0000005:
    
         12 PID:400002 TID:410002 Terminating thread 8feff024
         13 PID:400002 TID:410002 Secondary thread in proc 00400002 faulted, Exception code = c0000005, Exception Address = 00000000!
         13 PID:400002 TID:410002 Terminating Thread 00410002

    Saturday, November 1, 2014 10:47 AM