locked
USB test tool on WinCE RRS feed

  • Question

  • Hi All, 

    i have developed a USB driver on WinCE, and wish to have a test tool to vefiry it's current power state and other related parameters. I found some like USBcheck, but all in Windows. Anybody know other tools could test USB on WinCE platform?

    Thanks a lot
    Alex Du
    Thursday, June 18, 2009 5:35 AM

Answers

  • What kind of USB driver did you developed? 

    If you take a look at the Windows CE Test Kit (WCETK) you will find a USB host controller driver test. If you are using your driver as a USB Mass Storage device you can also use the storage manager test for this. I am not familiar with 3rd party tools but I believe there are some, 

    -- 
    Good luck,

    Erwin Zwart, 
    Check out my blog: http://GuruCE.com/blog

     GuruCE
     Microsoft Embedded Partner
     http://GuruCE.com
     Consultancy, training and development services.
    Monday, June 22, 2009 10:23 AM
  • Hi ddpisces,

    The following tables show the USB port tests that are found in the Windows Embedded CE 6.0 Test Kit (CETK).

    Tests the USB host controller drivers

    USB Performance Test

    For Windows Embedded CE: Measures host-side and device-side performance at the bus level in order to debug general performance issues

    USB Stress Test

    For Windows Embedded CE: Runs common scenarios for USB on the platform being tested, but at a higher rate of frequency and with larger payloads in order to stress the system and reveal possible defects.



    Best regards,
    Guang-Ming Bian - MSFT


    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    Tuesday, June 23, 2009 3:07 AM

All replies

  • What kind of USB driver did you developed? 

    If you take a look at the Windows CE Test Kit (WCETK) you will find a USB host controller driver test. If you are using your driver as a USB Mass Storage device you can also use the storage manager test for this. I am not familiar with 3rd party tools but I believe there are some, 

    -- 
    Good luck,

    Erwin Zwart, 
    Check out my blog: http://GuruCE.com/blog

     GuruCE
     Microsoft Embedded Partner
     http://GuruCE.com
     Consultancy, training and development services.
    Monday, June 22, 2009 10:23 AM
  • Hi ddpisces,

    The following tables show the USB port tests that are found in the Windows Embedded CE 6.0 Test Kit (CETK).

    Tests the USB host controller drivers

    USB Performance Test

    For Windows Embedded CE: Measures host-side and device-side performance at the bus level in order to debug general performance issues

    USB Stress Test

    For Windows Embedded CE: Runs common scenarios for USB on the platform being tested, but at a higher rate of frequency and with larger payloads in order to stress the system and reveal possible defects.



    Best regards,
    Guang-Ming Bian - MSFT


    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    Tuesday, June 23, 2009 3:07 AM
  • Hi All, 

    Actually, i only want some simple methods to check if the USB device suspended or not, is there any simple method to do that?


    Appreciatively
    Alex
    Tuesday, June 23, 2009 4:05 AM
  • Hi ddpisces,

    As far as I know, there is no such simple way to do it, please try CETK tool.


    Best regards,
    Guang-Ming Bian - MSFT
    Please remember to mark the replies as answers if they help and unmark them if they provide no help
    Tuesday, June 23, 2009 7:32 AM
  • Hi, 

    from the links, it seems need some special hardware to test USB driver. how to setup the enviroment, and anyone use it to test USB's power state before?

    Thanks

    Wednesday, July 1, 2009 9:42 AM