none
Windows IOT on Intel Galileo V2 RRS feed

  • Question

  • Hi

    I have download the following SD Image:

    9600.16384.x86fre.winblue_rtm_iotbuild.150309-0310_galileo_v2.wim

    and I created the SD Card according to the instructions 

    but it seem like my galileo is not booting, when I connected a serial cable I saw the following, what should I do?

    ==== Serial Lo ====

    ConvertPages: failed to find range 10000000 - 1019FFFF
                                Windows Boot Manager

    Windows failed to start. A recent hardware or software change might be the
    cause. To fix the problem:

      1. Insert your Windows installation disc and restart your computer.
      2. Choose your language settings, and then click "Next."
      3. Click "Repair your computer."

    If you do not have this disc, contact your system administrator or computer
    manufacturer for assistance.

        File:

        Status: 0xc0000225

        Info: The Boot Configuration Data for your PC is missing or contains
              errors.

                                                        ESC=UEFI Firmware Settings

    ==== Serial Log ====

    Monday, May 11, 2015 2:21 PM

All replies

  • What version of Intel firmware do you have on your board? Have you updated to the latest from the Intel site?
    Monday, May 11, 2015 10:50 PM
    Moderator
  • What version of Intel firmware do you have on your board? Have you updated to the latest from the Intel site?

    I'm using 1.0.4, and I even updated again just to make sure...

    still having the same issue.

    Thursday, May 14, 2015 7:49 PM
  • Have you looked on the forums as to the cause of the message "The Boot Configuration Data for your PC is missing or contains errors."

    I would try and see if you can still boot the board into Linux/Arduino and if you can, then the next step would be to try another SD card.

    Tuesday, May 19, 2015 12:03 AM
    Moderator