none
WEC 7 and WMDC RRS feed

  • Question

  • Project needs to use active sync over USB.

    The connection will work using a previous application developed for WEC6 and the same hardware.

    I rebuilt the BSP using Active Sync in the catalog Items, but it still won't connect.

    The connection is between an ordinary USB and a mini-USB port on the device.

    The application does otherwise operate, but we need this connection to enhance and debug.


    Joe Garry

    Saturday, November 23, 2019 12:54 AM

All replies

  • Read this and this post. It still doesn't work on my PC, but others have been successful. Please let us know what worked for you, if anything.

    Good luck,

    Michel Verhagen, eMVP
    Check out my blog: https://guruce.com/blog

    GuruCE
    Microsoft Embedded Partner
    NXP Proven Partner
    https://guruce.com
    Consultancy, training and development services.

    Interested in WEC on i.MX6?
    Get the only 100% stable and best performing i.MX6 BSP for WEC7 and WEC2013 here: https://guruce.com/imx6

    Monday, November 25, 2019 12:45 AM
    Moderator