none
Setting Color Depth on WEC7 RRS feed

  • Question

  • Hi All,

    Any way in platform builder or registery entry etc to set the color depth on embedded compact?  Im having problems with performance with Silverlight and would like to try setting to a lower color depth.

    Thanks!

    Thursday, October 6, 2011 11:50 AM

Answers

  • The color depth is dictated from the display device driver: look at the documentation of your BSP or the BSP platform.reg or the .reg file for the display driver to check which depth values it supports. In addition, in an embedded system the choice of the bpp values can be limited by the actual display you're using and/or the signals connection between the display and the display controller.


    Luca Calligaris lucaDOTcalligarisATeurotechDOTcom www.eurotech.com Check my blog: http://lcalligaris.wordpress.com
    • Marked as answer by ghatzie Thursday, October 6, 2011 2:43 PM
    Thursday, October 6, 2011 1:19 PM

All replies

  • The color depth is dictated from the display device driver: look at the documentation of your BSP or the BSP platform.reg or the .reg file for the display driver to check which depth values it supports. In addition, in an embedded system the choice of the bpp values can be limited by the actual display you're using and/or the signals connection between the display and the display controller.


    Luca Calligaris lucaDOTcalligarisATeurotechDOTcom www.eurotech.com Check my blog: http://lcalligaris.wordpress.com
    • Marked as answer by ghatzie Thursday, October 6, 2011 2:43 PM
    Thursday, October 6, 2011 1:19 PM
  • Ok i see, thanks very much for the reply!  Will have a look & check with the BSP provider.

    Thursday, October 6, 2011 2:43 PM