none
Problem on resuming the device RRS feed

  • Question

  • Hi all,

    iMX51 + WEC700.

    When i suspend the device and then resume it, i receive an error on the debug console and the resumed Explorer window does not show any icons/files.

    The debug log is:

    PID:00400002 TID:050D016A > PwrBtnThread Evnt - pwrstate=12010000 PID:00400002 TID:016D0006 PMIC_INT: stat0 = 0x80001, msk0 = 0xffffbb PID:00400002 TID:016D0006 PMIC_INT: stat1 = 0x9, msk1 = 0xffffe1 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 0 = 0x0 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 1 = 0x8 PID:00400002 TID:01680006 SM PmicButtonServThread PWRBTN1 - DoNothing PID:00400002 TID:02A10102 The value of ControlStatus is = 880h PID:00400002 TID:02A10102 The value of ControlStatus is = 8880h PID:00400002 TID:050D016A > PwrBtnThread msec=1827 PID:00400002 TID:050D016A > bkl state = D0 PID:00400002 TID:050D016A > PwrBtnThread set event!! PID:09790242 TID:0962024A --test---> Suspend PID:00400002 TID:00D30006 +BSPBacklightSetIntensity 0 PID:00400002 TID:00D30006 -BSPBacklightSetIntensity PID:00400002 TID:016A0006 - Msg = 0x1 PID:09790242 TID:0960024A : PBT_TRANSITION to system power state [Flags: 0x200000]: 'suspend' PID:00400002 TID:016D0006 PMIC_INT: stat0 = 0x80001, msk0 = 0xffffbb PID:00400002 TID:016D0006 PMIC_INT: stat1 = 0x9, msk1 = 0xffffe1 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 0 = 0x0 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 1 = 0x8 PID:00400002 TID:00D30006 DPDisable: Disabling DP! PID:00400002 TID:00D30006 DMFCDisable: Disabling DMFC! PID:00400002 TID:00D30006 + BSPDisableDisplayClock PID:00400002 TID:00D30006 + BSPDisableDisplayClock PID:00400002 TID:00D30006 +BSPDisablePanel PID:00400002 TID:02A10102 The value of ControlStatus is = 880h PID:00400002 TID:00D30006 - LVDSDisablePanel() PID:00400002 TID:02A10102 The value of ControlStatus is = 2940h PID:00400002 TID:00D30006 BSPPmicPowerNotifySuspend PID:00400002 TID:00D30006 UIO:: Exiting ndisuioWaitForPendingIO with [0] pending TX. PID:00400002 TID:00D30006 Ndisuio: PID:00400002 TID:00D30006 PnPEvent: Open D4358030, SetPower to 4 PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000 PID:09790242 TID:0960024A > POWER_STATE_SUSPEND PID:00400002 TID:01680006 SM PmicButtonServThread PWRBTN1 - DoNothing PID:00400002 TID:050D016A >re-loop PwrBtnThread PID:00400002 TID:00D30006 FSREG: Flushing registry PID:00400002 TID:00E50052 VCharger = 5020 mV PID:00400002 TID:00E50052 VBatt = 4185 mV PID:00400002 TID:00E50052 BattCurr = -5 mA PID:00400002 TID:00D30006 FSRAM: Flushing cached file data PID:00400002 TID:00D30006 Powering Off system: PID:00400002 TID:00D30006 Calling GWES power proc. PID:00400002 TID:00D30006 [KPP]BSPKppRegInit: g_pKPP=0xd8970000 PID:00400002 TID:00D30006 Calling device manager power proc. PID:00400002 TID:00D30006 VIO_PowerDn PID:00400002 TID:00D30006 Calling OEMPowerOff... PID:00400002 TID:00D30006 +BSPPowerOff [0] PID:00400002 TID:00D30006 +GPIO4_10 dir 400 PID:00400002 TID:00D30006 +OALCPUPowerOff

    PID:00400002 TID:00D30006 -OALCPUPowerOff PID:00400002 TID:00D30006 --> INFO: OEMPowerOff leaving suspend. IRQ = 0x34 PID:00400002 TID:00D30006 --> INFO: OEMPowerOff leaving suspend. g_oalWakeSource = 0x1e PID:00400002 TID:00D30006 +BSPPowerOn PID:00400002 TID:00D30006 +GPIO4_10 dir 400 PID:00400002 TID:00D30006 Back from OEMPowerOff PID:00400002 TID:00D30006 Calling device manager power proc. PID:00400002 TID:00D30006 BSPPmicPowerNotifyResume PID:00400002 TID:00D30006 VIO_PowerUp PID:00400002 TID:00D30006 USB2COM:HcdMdd_PowerUp called PID:00400002 TID:00D30006 Calling GWES power proc. PID:00400002 TID:00D30006 [KPP]BSPKppRegInit: g_pKPP=0xd8970000 PID:00400002 TID:00D30006 Returning to normally scheduled programming. PID:00400002 TID:016D0006 PMIC_INT: stat0 = 0x90009, msk0 = 0xffffbb PID:00400002 TID:016D0006 PMIC_INT: stat1 = 0x9, msk1 = 0xffffe1 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 0 = 0x0 PID:00400002 TID:016D0006 PMIC_INT: Active Interrupts 1 = 0x8 PID:00400002 TID:0232012E UsbFnMdd!UfnMdd_Notify: Ignoring notification 0x00000001 - 0x00000000 from PDD PID:00400002 TID:02C3006E CHub(Root tier 0)::HubStatusChangeThread - port 1, change = 0x0003, status = 0x0101 PID:00400002 TID:02C3006E hubStatus PortEnableChange = 1 PID:00400002 TID:02C3006E hubStatus PortEnabled = 0 PID:00400002 TID:02C3006E hubStatus PortConnected = 1 PID:00400002 TID:02C3006E hubStatus ForceDetach = 1 PID:00400002 TID:02C3006E hubStatus.change.port.ConnectStatusChange = 1 PID:00400002 TID:02C3006E CHub(Root tier 0)::HubStatusChangeThread - device on port 1 is connected but has been disabled. Trying to detach & re-attach PID:00400002 TID:02C3006E +CHub(Root tier 0)::DetachDevice - port = 1 PID:00400002 TID:02C3006E CHub(Root tier 0)::DetachDevice - no threads available, doing detach work now. PID:00400002 TID:02C3006E +CHub::DetachDownstreamDeviceThread PID:00400002 TID:02C3006E +CHub(External tier 1)::HandleDetach PID:00400002 TID:02C3006E USBHost : Detach Hub [address(1) / layer(0)] PID:00400002 TID:050D016A > PwrBtnThread Evnt - pwrstate=200000 PID:00400002 TID:050D016A >>> PwrBtnThread no SUSPEND -> POWER_STATE_ON !! PID:00400002 TID:02C3006E CHub(External tier 1)::HandleDetach - status change thread closed in 7 ms PID:00400002 TID:016A0006 - Msg = 0x1 PID:09790242 TID:0960024A : PBT_TRANSITION to system power state [Flags: 0x0]: 'resuming' PID:00400002 TID:00D30006 +BSPBacklightSetIntensity 20 PID:00400002 TID:02C3006E +CHub(External tier 2)::HandleDetach PID:00400002 TID:02C3006E USBHost : Detach Hub [address(2) / layer(1)] PID:00400002 TID:00D30006 -BSPBacklightSetIntensity PID:00400002 TID:00D30006 BSPPmicPowerNotifyResume PID:00400002 TID:02C3006E CHub(External tier 2)::HandleDetach - status change thread closed in 6 ms PID:00400002 TID:00D30006 +BSPInitializePanel portID=4 'LVDS 1024x768 Tianma' PID:00400002 TID:00D30006 -- W=1024 H=768 PID:00400002 TID:00D30006 -- V 5 23 10 PID:00400002 TID:02C3006E +CFunction(tier 3)::HandleDetach PID:00400002 TID:02C3006E USBHost : Detach Function [address(4) / layer (2)] PID:00400002 TID:00D30006 -- H 60 160 100 PID:00400002 TID:00D30006 -- f 65000000 Hz PID:00400002 TID:00D30006 -- Pxl 0 0 8 PID:00400002 TID:00D30006 + LVDSInitializePanel() PID:00400002 TID:00D30006 +BSPEnableDisplayClock PID:00400002 TID:02C3006E WARNING: Forcing open handle to 'KBD1'/'KBD1' closed PID:00400002 TID:02C3006E OSAXST1: <<< Unloading Module 'kbdhid.dll' (0xC0460480) at address 0xEEC50000-0xEEC5A000 in Process 'NK.EXE' (0x8487FAD0) PID:00400002 TID:02C3006E !USBD: Invalid Pipe handle 0xD3812760 (sig 0xDEADDEAD) PID:00400002 TID:02C3006E !USBD:AbortPipeTransfers - Invalid handle PID:00400002 TID:02C3006E !USBD: Invalid Pipe handle 0xD3812760 (sig 0xDEADDEAD) PID:00400002 TID:02C3006E !USBD:ClosePipe - Invalid handle PID:00400002 TID:00D30006 DPEnable: Enabling DP! PID:00400002 TID:00D30006 DMFCEnable: Enabling DMFC! PID:00400002 TID:00D30006 +BSPEnablePanel PID:00400002 TID:00D30006 +LVDSEnablePanel() PID:00400002 TID:03DC0092 StartInterruptTransfer: IssueInterruptTransfer failed PID:00400002 TID:00D30006 -LVDSEnablePanel() PID:00400002 TID:02B1008A !USBD: Invalid Pipe handle 0xD3812760 (sig 0xDEADDEAD) PID:00400002 TID:02B1008A !USBD:IssueInterruptTransfer - Invalid handle PID:00400002 TID:02B1008A StartInterruptTransfer: IssueInterruptTransfer failed PID:00400002 TID:018C0006 SDIOConnectDisconnectInterrupt: device is not SDIO ! PID:00400002 TID:018C0006 SDMemory: +SlotEventCallBack - 1 PID:00400002 TID:018C0006 SDMemory: -SlotEventCallBack PID:00400002 TID:018C0006 SDMemory: +SMC_PreDeinit PID:00400002 TID:018C0006 SDMemory: -SMC_PreDeinit PID:00400002 TID:018C0006 SDMemory: +SMC_Deinit PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0 PID:00400002 TID:02C3006E -CFunction(tier 3)::HandleDetach PID:00400002 TID:02C3006E +CFunction(tier 3)::HandleDetach PID:00400002 TID:02C3006E USBHost : Detach Function [address(5) / layer (2)] PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!! PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000 PID:00400002 TID:02C3006E OSAXST1: <<< Unloading Module 'mouhid.dll' (0xC0464C18) at address 0xEEC30000-0xEEC37000 in Process 'NK.EXE' (0x8487FAD0) PID:00400002 TID:02C3006E !USBD: Invalid Pipe handle 0xD38148D0 (sig 0xDEADDEAD) PID:00400002 TID:02C3006E !USBD:AbortPipeTransfers - Invalid handle PID:00400002 TID:02C3006E !USBD: Invalid Pipe handle 0xD38148D0 (sig 0xDEADDEAD) PID:00400002 TID:02C3006E !USBD:ClosePipe - Invalid handle PID:00400002 TID:02C3006E OSAXST1: <<< Unloading Module 'usbhid.dll' (0xC045EE60) at address 0xEED30000-0xEED46000 in Process 'NK.EXE' (0x8487FAD0) PID:00400002 TID:02C3006E OSAXST1: <<< Unloading Module 'hidparse.dll' (0xC045F000) at address 0xEEC60000-0xEEC75000 in Process 'NK.EXE' (0x8487FAD0) PID:00400002 TID:00D30006 ==>ndisPauseMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>NdisMPauseComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==NdisMPauseComplete: Miniport D3816218 PID:00400002 TID:02C3006E -CFunction(tier 3)::HandleDetach PID:00400002 TID:02C3006E -CHub(External tier 2)::HandleDetach PID:00400002 TID:02C3006E -CHub(External tier 1)::HandleDetach PID:00400002 TID:02C3006E -CHub::DetachDownstreamDeviceThread PID:00400002 TID:02C3006E -CHub(Root tier 0)::DetachDevice - port = 1 PID:00400002 TID:00D30006 <==ndisPauseMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>ndisRestartMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>NdisMRestartComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==NdisMRestartComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==ndisRestartMiniport: Miniport D3816218, Status 0 PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0 PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!

    PID:00400002 TID:00D30006 RHeapCheckFreeSentinels: Bad free item: 0xC4465940 @0xC4465968 -> 0xaaaaaaaa SHDB 0xcccccccc. Raising exception ... PID:00400002 TID:00D30006 RHeapCheckFreeSentinels: Previous Allocation details @0xc4465968 Size:0x00000020 FreePC:0xeed3efa8 AllocPC:0xeed3ef2c PID:00400002 TID:00D30006 Exception 'Raised Exception' (0xc0008002): Thread-Id=00d30006(pth=c0408c78), Proc-Id=00400002(pprc=8487fad0) 'NK.EXE', VM-active=00400002(pprc=8487fad0) 'NK.EXE' PID:00400002 TID:00D30006 PC=efe50e08(k.coredll.dll+0x00050e08) RA=802a20dc(kernel.dll+0x0002e0dc) SP=cc67e174, BVA=c4465940

    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!! PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000 PID:00400002 TID:00D30006 ==>ndisPauseMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>NdisMPauseComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==NdisMPauseComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==ndisPauseMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>ndisRestartMiniport: Miniport D3816218 PID:00400002 TID:00D30006 ==>NdisMRestartComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==NdisMRestartComplete: Miniport D3816218 PID:00400002 TID:00D30006 <==ndisRestartMiniport: Miniport D3816218, Status 0 PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000 PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0 PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!! PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!

    It seems that after one of the 'UIO: unknown indicated status...' message, there is an exception on the heap.

    Any idea? Any advice?


    SteMMo

    Wednesday, January 23, 2013 11:06 AM

All replies

  • From the log i see that, right after the resume interrupt, the USB devices are detached and then attached; everything in the resume phase...

    Is it correct?


    SteMMo

    Wednesday, January 23, 2013 3:59 PM
  • From the log i am able to see only the USB host detach messages not attach messages. if you want to analyse the heap memory, you can use DevHealth tool. see the below links

    http://msdn.microsoft.com/en-us/library/jj584887.aspx

    http://msdn.microsoft.com/en-us/library/jj584894.aspx


    Vinoth.R

    www.e-consystems.com

    http://vinoth-vinothblog.blogspot.com

    Thursday, January 24, 2013 5:48 AM
  • That was on a little piece of the log.

    Suspend:
    
    PID:080C025E TID:09C80262 : PBT_TRANSITION to system power state [Flags: 0x200000]: 'suspend'
    PID:00400002 TID:016D0006 PMIC_INT:  stat0 = 0x80001, msk0 = 0xffffbb
    PID:00400002 TID:016D0006 PMIC_INT:  stat1 = 0x9, msk1 = 0xffffe1
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 0 = 0x0
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 1 = 0x8
    PID:00400002 TID:00D30006 DPDisable: Disabling DP!
    PID:00400002 TID:00D30006 DMFCDisable: Disabling DMFC!
    PID:00400002 TID:00D30006 +BSPDisablePanel
    PID:00400002 TID:00D30006 - LVDSDisablePanel()
    PID:00400002 TID:00D30006 BSPPmicPowerNotifySuspend
    PID:00400002 TID:00D30006 UIO:: Exiting ndisuioWaitForPendingIO with [0] pending TX.
    PID:00400002 TID:00D30006 Ndisuio:
    PID:00400002 TID:00D30006 PnPEvent: Open DBA283B0, SetPower to 4
    PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000
    PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000
    
    PID:00510012 TID:0850026A [WLANSVC] ACM: Stop auto config. Interface = VNUWLC61.
    PID:00510012 TID:0850026A FatMsm: NDISUIO set failed, OID ffff0002, error 1167
    PID:080C025E TID:09C80262 > POWER_STATE_SUSPEND
    
    PID:00510012 TID:0850026A FatMsm: NDISUIO set failed, OID 0001020f, error 1167
    PID:00510012 TID:0850026A [WLANSVC] ACM: Change radio state, PHY = 0, software state = 2, hardware state = 2)
    PID:00510012 TID:0850026A [WLANSVC] ACM: Change radio state, PHY = 1, software state = 2, hardware state = 2)
    PID:00510012 TID:0850026A [WLANSVC] ACM: Radio is off. Interface = VNUWLC61.
    
    PID:00400002 TID:00D30006 UIO:: Exiting ndisuioWaitForPendingIO with [0] pending TX.
    PID:00400002 TID:00D30006 Ndisuio:
    PID:00400002 TID:00D30006 PnPEvent: Open D4347CC0, SetPower to 4
    PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000
    PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000
    
    PID:00400002 TID:00D30006 FSREG: Flushing registry
    PID:00400002 TID:00D30006 FSRAM: Flushing cached file data
    PID:00400002 TID:00D30006 Powering Off system:
    PID:00400002 TID:00D30006   Calling GWES power proc.
    PID:00400002 TID:00D30006 [KPP]BSPKppRegInit:  g_pKPP=0xd8b40000
    PID:00400002 TID:00D30006   Calling device manager power proc.
    PID:00400002 TID:00D30006 VIO_PowerDn
    PID:00400002 TID:00D30006   Calling OEMPowerOff...
    PID:00400002 TID:00D30006 +BSPPowerOff [0]
    PID:00400002 TID:00D30006 +OALCPUPowerOff
    
    
    Press button to resume:
    
    PID:00400002 TID:00D30006 -OALCPUPowerOff
    PID:00400002 TID:00D30006 --> INFO: OEMPowerOff leaving suspend.  IRQ = 0x34
    PID:00400002 TID:00D30006 --> INFO: OEMPowerOff leaving suspend.  g_oalWakeSource = 0x1e
    PID:00400002 TID:00D30006 +BSPPowerOn
    PID:00400002 TID:00D30006 +GPIO4_10 dir 400
    PID:00400002 TID:00D30006 Back from OEMPowerOff
    PID:00400002 TID:00D30006   Calling device manager power proc.
    PID:00400002 TID:00D30006 BSPPmicPowerNotifyResume
    PID:00400002 TID:00D30006 VIO_PowerUp
    PID:00400002 TID:00D30006 USB2COM:HcdMdd_PowerUp called
    PID:00400002 TID:00D30006   Calling GWES power proc.
    PID:00400002 TID:00D30006 [KPP]BSPKppRegInit:  g_pKPP=0xd8b40000
    PID:00400002 TID:00D30006   Returning to normally scheduled programming.
    
    PID:00400002 TID:016D0006 PMIC_INT:  stat0 = 0x90009, msk0 = 0xffffbb
    PID:00400002 TID:016D0006 PMIC_INT:  stat1 = 0x9, msk1 = 0xffffe1
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 0 = 0x0
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 1 = 0x8
    
    PID:00400002 TID:03ED0222 UsbFnMdd!UfnMdd_Notify: Ignoring notification 0x00000001 - 0x00000000 from PDD
    PID:00400002 TID:02FA003A CHub(Root tier 0)::HubStatusChangeThread - port 1, change = 0x0003, status = 0x0101
    PID:00400002 TID:02FA003A hubStatus PortEnableChange = 1
    PID:00400002 TID:02FA003A hubStatus PortEnabled = 0
    PID:00400002 TID:02FA003A hubStatus PortConnected = 1
    PID:00400002 TID:02FA003A hubStatus ForceDetach = 1
    PID:00400002 TID:02FA003A hubStatus.change.port.ConnectStatusChange = 1
    PID:00400002 TID:02FA003A CHub(Root tier 0)::HubStatusChangeThread - device on port 1 is connected but has been disabled. Trying to detach & re-attach
    PID:00400002 TID:02FA003A +CHub(Root tier 0)::DetachDevice - port = 1
    
    PID:00400002 TID:016D0006 PMIC_INT:  stat0 = 0x90009, msk0 = 0xffffbb
    PID:00400002 TID:016D0006 PMIC_INT:  stat1 = 0x9, msk1 = 0xffffe1
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 0 = 0x0
    PID:00400002 TID:016D0006 PMIC_INT:  Active Interrupts 1 = 0x8
    
    PID:00400002 TID:02FA003A CHub(Root tier 0)::DetachDevice - no threads available, doing detach work now.
    PID:00400002 TID:02FA003A +CHub::DetachDownstreamDeviceThread
    PID:00400002 TID:02FA003A +CHub(External tier 1)::HandleDetach
    PID:00400002 TID:02FA003A 	USBHost : Detach Hub [address(1) / layer(0)]
    
    PID:00400002 TID:041501EA > PwrBtnThread Evnt - pwrstate=200000
    PID:00400002 TID:041501EA >>> PwrBtnThread no SUSPEND -> POWER_STATE_ON !!
    PID:00400002 TID:02FA003A CHub(External tier 1)::HandleDetach - status change thread closed in 7 ms
    
    PID:080C025E TID:09C80262 : PBT_TRANSITION to system power state [Flags: 0x0]: 'resuming'
    PID:00400002 TID:00D30006 +BSPBacklightSetIntensity 20
    
    PID:00400002 TID:02FA003A +CHub(External tier 2)::HandleDetach
    PID:00400002 TID:02FA003A 	USBHost : Detach Hub [address(2) / layer(1)]
    
    PID:00400002 TID:00D30006 -BSPBacklightSetIntensity
    PID:00400002 TID:00D30006 BSPPmicPowerNotifyResume
    
    PID:00400002 TID:02FA003A CHub(External tier 2)::HandleDetach - status change thread closed in 6 ms
    
    PID:00400002 TID:00D30006 +BSPInitializePanel portID=4 'LVDS 1024x768 Tianma'
    PID:00400002 TID:02FA003A +CFunction(tier 3)::HandleDetach
    PID:00400002 TID:02FA003A 	USBHost : Detach Function [address(4) / layer (2)]
    PID:00400002 TID:00D30006 + LVDSInitializePanel()
    PID:00400002 TID:00D30006 +BSPEnableDisplayClock
    
    PID:00400002 TID:02FA003A WARNING: Forcing open handle to 'KBD1'/'KBD1' closed
    PID:00400002 TID:02FA003A OSAXST1: <<< Unloading Module 'kbdhid.dll' (0xC044A2F8) at address 0xEEC50000-0xEEC5A000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD357EA80 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:AbortPipeTransfers - Invalid handle
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD357EA80 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:ClosePipe - Invalid handle
    
    PID:00400002 TID:00D30006 DPEnable: Enabling DP!
    PID:00400002 TID:00D30006 DMFCEnable: Enabling DMFC!
    PID:00400002 TID:00D30006 +BSPEnablePanel
    PID:00400002 TID:00D30006 +LVDSEnablePanel()
    PID:00400002 TID:033A005E StartInterruptTransfer: IssueInterruptTransfer failed
    PID:00400002 TID:00D30006 -LVDSEnablePanel()
    PID:00400002 TID:00D30006 Unknown: DEBUGCHK failed in file d:\chelanrtm14\private\winceos\net\ndis\sys\ndispwr.c at line 1732
    PID:00400002 TID:018C0006 SDIOConnectDisconnectInterrupt: device is not SDIO !
    PID:00400002 TID:018C0006 SDMemory: +SlotEventCallBack - 1
    PID:00400002 TID:018C0006 SDMemory: -SlotEventCallBack
    PID:00400002 TID:018C0006 SDMemory: +SMC_PreDeinit
    PID:00400002 TID:018C0006 SDMemory: -SMC_PreDeinit
    PID:00400002 TID:018C0006 SDMemory: +SMC_Deinit
      KdTrap: JIT debugging requested, waiting for OEM selection
      KdTrap: JIT debugging accepted
    
    !KITLRegisterDfltClient called before KitlInit. KITLGlobalState=00000080
    PID:00400002 TID:02890052 !USBD: Invalid Pipe handle 0xD357EA80 (sig 0xDEADDEAD)
    PID:00400002 TID:02890052 !USBD:IssueInterruptTransfer - Invalid handle
    PID:00400002 TID:02890052 StartInterruptTransfer: IssueInterruptTransfer failed
    
    PID:00400002 TID:00D30006 DEBUG_BREAK @ef4d9b28 Ignored.
    PID:00400002 TID:00D30006 ndisDevicePowerOn: Miniport DBA25A60, Power on failed by device driver for the Miniport, Error c0010018!
    
    PID:00400002 TID:02FA003A -CFunction(tier 3)::HandleDetach
    PID:00400002 TID:02FA003A +CFunction(tier 3)::HandleDetach
    PID:00400002 TID:02FA003A 	USBHost : Detach Function [address(5) / layer (2)]
    
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    PID:00400002 TID:00D30006 RequestStreamDevice: DeviceIoControl(3280904) to 0x08830143 failed -1073676264 (0xc0010018)
    
    PID:00400002 TID:02FA003A OSAXST1: <<< Unloading Module 'mouhid.dll' (0xC044EF3C) at address 0xEEC30000-0xEEC37000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD3583E00 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:AbortPipeTransfers - Invalid handle
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD3583E00 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:ClosePipe - Invalid handle
    PID:00400002 TID:02FA003A OSAXST1: <<< Unloading Module 'usbhid.dll' (0xC04498B8) at address 0xEED30000-0xEED46000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:02FA003A OSAXST1: <<< Unloading Module 'hidparse.dll' (0xC04499F0) at address 0xEEC60000-0xEEC75000 in Process 'NK.EXE' (0x848AFAD0)
    
    PID:00400002 TID:00D30006 SetDevicePower: 'vnuwlc61' failed IOCTL_POWER_SET D2, status is -1073676264
    PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000
    
    PID:00400002 TID:02FA003A -CFunction(tier 3)::HandleDetach
    PID:00400002 TID:02FA003A -CHub(External tier 2)::HandleDetach
    PID:00400002 TID:02FA003A +CFunction(tier 2)::HandleDetach
    PID:00400002 TID:02FA003A 	USBHost : Detach Function [address(3) / layer (1)]
    PID:00400002 TID:02FA003A USBD:FreePipeObject(0xD357E240), waiting for refcnt:1, try:1
    
    PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000
    ...
    PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000
    PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    
    PID:00400002 TID:00D30006 RHeapCheckFreeSentinels: Bad free item: 0xC4464E20  @0xC4464E4C -> 0xaaaaaaaa SHDB 0xcccccccc.  Raising exception ...
    PID:00400002 TID:00D30006 Exception 'Raised Exception' (0xc0008002): Thread-Id=00d30006(pth=c0408c78), Proc-Id=00400002(pprc=848afad0) 'NK.EXE', VM-active=00400002(pprc=848afad0) 'NK.EXE'
    PID:00400002 TID:00D30006 PC=efe50e08(k.coredll.dll+0x00050e08) RA=802a20dc(kernel.dll+0x0002e0dc) SP=cc67e138, BVA=c4464e20
    
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    PID:00400002 TID:00D30006 ==>ndisPauseFilterStack: Filter 00000000
    PID:00400002 TID:00D30006 <==ndisPauseFilterStack: Filter 00000000
    ...
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    PID:00400002 TID:00D30006 Back from PowerOffSystem.
    PID:00400002 TID:00D30006 Invalidating all screen bits!!
    
    PID:00400002 TID:02FA003A USBD:FreePipeObject(0xD357E240), waiting for refcnt:1, try:2
    
    PID:00400002 TID:00D30006 +BSPBacklightSetIntensity 255
    PID:00400002 TID:00D30006 -BSPBacklightSetIntensity
    PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000
    ...
    PID:00400002 TID:00D30006 ==>ndisRestartFilterStack: Filter 00000000
    PID:00400002 TID:00D30006 <==ndisRestartFilterStack: Filter 00000000, Status 0
    PID:00400002 TID:00D30006 UIO: Unknown indicated status [0x40010023]!!
    
    PID:00400002 TID:08F400BE ndisMResetCompleteStage2: Internal reset
    PID:00400002 TID:08F400BE ndisMResetCompleteStage2: Internal reset
    
    PID:00510012 TID:09E400B6 [WLANSVC] Failed to find a matching interface
    PID:00510012 TID:09E400B6 [WLANSVC] WimCEDevicePowerEventHandler: Failed to initialize interface context, error 87
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Start auto config. Interface = VNUWLC61.
    PID:00400002 TID:09E400B6 UIO: Unknown indicated status [0x40010022]!!
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Change radio state, PHY = 0, software state = 1, hardware state = 1)
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Change radio state, PHY = 1, software state = 1, hardware state = 1)
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Enable AutoConfig background scan. Interface = VNUWLC61, enable = 1.
    PID:00510012 TID:09E400B6 FatMsm: NDISUIO set failed, OID 0d010121, error 31
    
    PID:00400002 TID:02FA003A USBD:FreePipeObject(0xD357E240), waiting for refcnt:1, try:3
    
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Set media streaming mode. Interface = VNUWLC61, enable = 0, return code = 31.
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: CeIntfAcquirePowerOnState, scan state
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: Scan for networks. Interface = VNUWLC61, scan type = 0x80000003, flush BSS list = 0.
    
    PID:00400002 TID:018C0006 SDMemory: -SMC_Deinit
    PID:00400002 TID:018C0006 WARNING: Forcing open handle to 'DSK1'/'SDBus_0_0_0' closed
    PID:080C025E TID:09C80262 > SystemIDLE
    PID:00400002 TID:018C0006 OSAXST1: <<< Unloading Module 'sdmemory.dll' (0xC040F488) at address 0xEED80000-0xEED9A000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:086E0216 !USBD: Invalid transfer handle 0xD86C1C00 (sig 0xDEADDEAD)
    PID:00400002 TID:01680006 SM PmicButtonServThread PWRBTN1 - DoNothing
    
    PID:080C025E TID:09C80262 > PBT_RESUME
    PID:080C025E TID:09C80262 : PBT_TRANSITION to system power state [Flags: 0x12010000]: 'on'
    PID:080C025E TID:09C80262 > POWER_STATE_BACKLIGHTON
    PID:080C025E TID:09C80262 > POWER_STATE_ON
    PID:00400002 TID:09C80262 +BSPBacklightSetIntensity 255
    PID:00400002 TID:09C80262 -BSPBacklightSetIntensity
    
    PID:00400002 TID:086E0216 !USBD:GetTransferStatus, invalid handle
    PID:00400002 TID:086E0216 !USBD: Invalid transfer handle 0xD86C1C00 (sig 0xDEADDEAD)
    PID:00400002 TID:086E0216 !USBD:CloseTransfer, invalid handle
    
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: A scan request is already pending.
    PID:00510012 TID:09E400B6 [WLANSVC] ACM: A scan request is already pending.
    
    PID:00400002 TID:08FA009E UIO: Unknown indicated status [0x40010024]!!
    PID:00400002 TID:08FA009E ndisSetMiniportEthMulticastList: Request D3585BC8 being sent to miniport C4437EA0
    PID:00400002 TID:08FA009E ndisMResetCompleteStage2: Internal reset
    
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: Setting for 1 bit mode
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: PROCTL value = 0x7000020
    PID:00400002 TID:018C0006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 100000 Hz, Actual: 98958 Hz
    PID:00400002 TID:018C0006 HandleCommandErrors - STATUS ERROR BITS=0x00010000
    PID:00400002 TID:018C0006 DumpCurrentRequest: 0xC4437C24
    PID:00400002 TID:018C0006 	 Command: 5
    PID:00400002 TID:018C0006 	 Argument: 0x00000000
    ...
    PID:00400002 TID:018C0006 HOSTVER 0x00001201
    PID:00400002 TID:018C0006 -DumpESDHCRegs-------------------------
    PID:00400002 TID:018C0006 HandleCommandErrors - Command line error (0x10000). Resetting CMD line.
    PID:00400002 TID:018C0006 SDSynchronousBusRequest_I: queue request failed(0xc0000014),TransferClass(2), CommandCode(1),CommandArgument(400e0000)
    
    PID:00400002 TID:02FA003A ==>ndisPauseFilterStack: Filter 00000000
    PID:00400002 TID:02FA003A <==ndisPauseFilterStack: Filter 00000000
    PID:00400002 TID:02FA003A ==>ndisPauseMiniport: Miniport DBA25A60
    PID:00400002 TID:02FA003A ==>NdisMPauseComplete: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==NdisMPauseComplete: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==ndisPauseMiniport: Miniport DBA25A60
    PID:00400002 TID:03B900D6 The value of ControlStatus is = 940h
    
    PID:00400002 TID:02FA003A UIO:: ndisuioDoRequest() fails binding for pOpenContext[0xdba283b0] no longer active.
    PID:00400002 TID:02FA003A Ndisuio:
    PID:00400002 TID:02FA003A ShutDownBinding: set packet filter failed: c0000001
    PID:00400002 TID:02FA003A UIO:: ndisuioDoRequest() fails binding for pOpenContext[0xdba283b0] no longer active.
    PID:00400002 TID:02FA003A Ndisuio:
    PID:00400002 TID:02FA003A ShutDownBinding: set multicast list failed: c0000001
    PID:00400002 TID:02FA003A UIO:: Exiting ndisuioWaitForPendingIO with [0] pending TX.
    
    PID:00400002 TID:03B900D6 The value of ControlStatus is = 800h
    PID:00400002 TID:03B900D6 The value of ControlStatus is = 800h
    PID:00400002 TID:02FA003A ==>ndisRestartMiniport: Miniport DBA25A60
    PID:00400002 TID:02FA003A ==>NdisMRestartComplete: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==NdisMRestartComplete: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==ndisRestartMiniport: Miniport DBA25A60, Status 0
    PID:00400002 TID:02FA003A ==>ndisRestartFilterStack: Filter 00000000
    PID:00400002 TID:02FA003A <==ndisRestartFilterStack: Filter 00000000, Status 0
    PID:00400002 TID:02FA003A ==>ndisDetachFiltersOnMiniport, Miniport DBA25A60
    PID:00400002 TID:02FA003A <==ndisDetachFiltersOnMiniport, Miniport DBA25A60
    PID:00400002 TID:02FA003A ==>ndisMHaltMiniport: Miniport DBA25A60
    PID:00400002 TID:02FA003A ==>ndisMCommonHaltMiniport: Miniport DBA25A60
    PID:00510012 TID:09BD0022 FatMsm: receiving data error 31, adapter 1
    PID:00510012 TID:09F5003A [WLANSVC] Wlan: CeIntfPowerNotificationsThread Exiting
    
    PID:00400002 TID:0916012A Ndisuio:
    PID:00400002 TID:0916012A SetOid: Open DBA283B0/10200200 is in invalid state
    PID:00510012 TID:0916012A FatMsm: NDISUIO set failed, OID ffff0002, error 31
    PID:00510012 TID:0916012A [WLANSEC] Move adapter 1F2DF0 00:12:7B:56:58:42 to deleted list
    PID:00510012 TID:0916012A [WLANSEC] Delete adapter 1F2DF0 00:12:7B:56:58:42
    PID:00510012 TID:0916012A [WLANSEC] Deleting all ports for adapter 1F2DF0
    PID:00510012 TID:0916012A [WLANSEC] Remove adapter 1F2DF0 00:12:7B:56:58:42 from deleted list
    PID:00510012 TID:0916012A [WLANSEC] Destroy adapter at 1F2DF0 00:12:7B:56:58:42
    PID:00510012 TID:0916012A [WLANSEC] Deinitializing adapter 1F2DF0 00:12:7B:56:58:42
    PID:00510012 TID:0916012A [WLANSEC] Port List Empty, DeletedPortList Empty, pInfraPort NULL
    
    PID:00400002 TID:018C0006 FSREG: Invalid HKEY 0xcc510a80
    PID:00400002 TID:018C0006 FSREG: Invalid HKEY 0xcc510a80
    
    PID:00510012 TID:0916012A [WLANSEC] PreAuth: Clearing out block-list.
    PID:00510012 TID:0916012A [WLANSEC] Reset Primary: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
    PID:00510012 TID:0916012A [WLANSEC] Reset Primary: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
    
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:02FA003A ==>NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==ndisMCommonHaltMiniport: Miniport DBA25A60
    PID:00400002 TID:02FA003A ==>NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==ndisMHaltMiniport: Miniport DBA25A60
    
    PID:00400002 TID:018C0006 SDBusDriver: The SDIO card does not support block mode.  Use Soft-Block instead.
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: Setting for 4 bit mode
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: PROCTL value = 0x7000022
    PID:00400002 TID:018C0006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 25000000 Hz, Actual : 23750000 Hz
    PID:00400002 TID:018C0006 The clock rate is set to 23750000
    PID:00400002 TID:02FA003A ndisDereferenceMiniport:Miniport DBA25A60, Ref = 0
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: Setting for 4 bit mode
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: PROCTL value = 0x7000022
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: Setting for 4 bit mode
    PID:00400002 TID:018C0006 CESDHCBase::SetInterface: PROCTL value = 0x7000022
    PID:00400002 TID:018C0006 HandleAddDevice: LoadDevice type = 2, slot 0
    PID:00400002 TID:018C0006 DeviceFolder::LoadDevice!Loading driver from device key \Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity
    PID:00400002 TID:018C0006 13
    
    PID:00400002 TID:02FA003A ==>ndisDeQueueMiniportOnDriver, Miniport DBA25A60, MiniBlock D86CD3F0
    PID:00400002 TID:02FA003A <==ndisDeQueueMiniportOnDriver: Miniport DBA25A60, MiniBlock D86CD3F0
    PID:00400002 TID:02FA003A ==>NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    PID:00400002 TID:02FA003A <==NdisMDeregisterAdapterShutdownHandler: Miniport DBA25A60
    
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    PID:00400002 TID:026C018A ERROR: REGISTRY!LockHkeyHandle - invalid HKEY! hKey=0x0267018b, hSrcProc=0x00400002
    
    PID:00400002 TID:02FA003A ==>ndisMUnload: DriverObject C4474F10
    PID:00400002 TID:02FA003A ndisMUnload: MiniBlock D86CD3F0
    PID:00400002 TID:02FA003A <==ndisMUnload: DriverObject C4474F10, MiniBlock 00000000
    
    PID:00400002 TID:03B900D6 The value of ControlStatus is = 940h
    PID:00400002 TID:03B900D6 UIO: Unknown indicated status [0x40010023]!!
    PID:00400002 TID:00B70006 RemoveDevice: 'vnuwlc61' not in class list
    
    PID:00510012 TID:04810192 AddrChangeListener::Thread - Handling [AddrChangeEvent] event.
    PID:00510012 TID:04810192 CmCspIp: CmCspIpState::HandleIpAddrChange - handling IP addr change.
    PID:00510012 TID:04810192 CmCspIp: CmCspIpState::UpdateStateBasedOnAddr - state of connection [7F2E4283-F388-37E0-CC99-4A998EDBD415], adapter [FEC1] has changed [200]->[1].
    PID:00510012 TID:048F019E CmService: Listener::Thread - Handling [AddrChangeEvent] event.
    PID:00510012 TID:089F0056 ETHMAN: Error updating connection status: 0PID:00510012 TID:084D024E CmClient: CmUnregisterNotificationsListener - CM not Initialized. Call CmApiInit() to initialize CM APIs.
    PID:00400002 TID:01F80006 CACHEFILT:CachedVolume_t::AsyncWriteBackAllMaps cannot write back, pVolume=0xcc9804b0 FSDMGR result=4319
    PID:00400002 TID:03B900D6 UIO: Unknown indicated status [0x40010023]!!
    
    PID:00400002 TID:018C0006 OSAXST1: >>> Loading Module 'sdmemory.dll' (0xC040F488) at address 0xEED80000-0xEED9A000 in Process 'NK.EXE' (0x848AFAD0)
    
    PID:00400002 TID:084D024E Exception 'Data Abort' (0x4): Thread-Id=084d024e(pth=c080dd30), Proc-Id=00400002(pprc=848afad0) 'NK.EXE', VM-active=00510012(pprc=c04178f4) 'udevice.exe'
    PID:00400002 TID:084D024E PC=efca8cfc(filesys.dll+0x00038cfc) RA=efca6ddc(filesys.dll+0x00036ddc) SP=db6bf894, BVA=cca2d140
    PID:00400002 TID:084D024E ERROR: d:\chelanrtm14\private\winceos\coreos\filesys\reg\regapi.c line 2406:
    PID:00400002 TID:084D024E FS: Hive Exception Handler
    
    PID:00400002 TID:018C0006 SDMemory: +SMC_Init
    PID:00400002 TID:018C0006 SDGetDeviceHandle: ActivePath: Drivers\Active\50
    PID:00400002 TID:018C0006 SDGetClientFunctions: +Init
    PID:00400002 TID:018C0006 SDGetClientFunctions: -Init
    PID:00400002 TID:018C0006 SDMemCardConfig: Card is high capacity (2.0+)
    PID:00400002 TID:018C0006 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1077149696, ReadTotal: 0, Write Factor: 1093567616 WriteTotal: 50000
    PID:00400002 TID:018C0006 SDMemory: Initialize: Using block transfer size of 64 blocks
    PID:00400002 TID:018C0006 SDMemory: Idle Timeout: 2000 Idle Power State: 2
    PID:00400002 TID:018C0006 SDMemory: Power Management Setup complete
    PID:00400002 TID:018C0006 SDMemory: -SMC_Init
    PID:00400002 TID:018C0006 DeviceFolder::LoadDevice!ActivateDeviceEx() ret -610113020
    PID:00400002 TID:018C0006 DeviceFolder::LoadDevice(\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity) last 3178 Ticks
    
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD357E240 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:ClosePipe - Invalid handle
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD357E170 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:ClosePipe - Invalid handle
    PID:00400002 TID:02FA003A !USBD: Invalid Pipe handle 0xD357EFB0 (sig 0xDEADDEAD)
    PID:00400002 TID:02FA003A !USBD:ClosePipe - Invalid handle
    PID:00400002 TID:02FA003A OSAXST1: <<< Unloading Module 'vnuwlc6.dll' (0xC05D0680) at address 0xEE080000-0xEE0B0000 in Process 'NK.EXE' (0x848AFAD0)
    
    PID:00510012 TID:04810192 AddrChangeListener::Thread - Handling [AddrChangeEvent] event.
    PID:00510012 TID:04810192 CmCspIp: CmCspIpState::HandleIpAddrChange - handling IP addr change.
    PID:00400002 TID:02FA003A -CFunction(tier 2)::HandleDetach
    PID:00400002 TID:02FA003A -CHub(External tier 1)::HandleDetach
    PID:00400002 TID:02FA003A -CHub::DetachDownstreamDeviceThread
    PID:00400002 TID:02FA003A -CHub(Root tier 0)::DetachDevice - port = 1
    PID:00510012 TID:04810192 CmCspIp: CmCspIpState::UpdateStateBasedOnAddr - state of connection [7F2E4283-F388-37E0-CC99-4A998EDBD415], adapter [FEC1] has changed [1]->[200].
    PID:00510012 TID:048F019E CmService: Listener::Thread - Handling [AddrChangeEvent] event.
    PID:00510012 TID:083E026A [WLANAPI] Stopped waiting for notification because server returns error (0, 1818)
    PID:00510012 TID:084D024E CmClient: CmCloseSession - CM not Initialized. Call CmApiInit() to initialize CM APIs.
    PID:00510012 TID:084D024E 00510012.084d024e>
    PID:00510012 TID:084D024E Cairole:
    PID:00510012 TID:084D024E (0 == threadinits) Unbalanced call to CoUninitialize
    PID:09A70236 TID:08B00246 REGEXT: CHandleArray::ProcessNotifications: Entering WaitForMultipleObjects with 3 wait objects and a timeout of 0xffffffff
    PID:09A70236 TID:09A90236 Desktop Window QI, Unknown interface
    PID:09A70236 TID:08B00246 REGEXT: CHandleArray::ProcessNotifications: Entering WaitForMultipleObjects with 3 wait objects and a timeout of 0xffffffff
    
    PID:00400002 TID:00DB01F6 SWP:FrameChanged sent to window 0x70068C70 which is not visible
    PID:00510012 TID:0914012A 00510012.0914012a>
    PID:00510012 TID:0914012A Cairole:
    PID:00510012 TID:0914012A Unbalanced call to CoInitialize for thread 152305962
    PID:00400002 TID:00830002 OSAXST1: <<< Unloading Module 'diskcache.dll' (0xC0410A70) at address 0xEF8D0000-0xEF8DA000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:00830002 OSAXST1: <<< Unloading Module 'exfat.dll' (0xC04103F8) at address 0xEF8E0000-0xEF91D000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:00830002 OSAXST1: <<< Unloading Module 'mspart.dll' (0xC04101B0) at address 0xEF800000-0xEF810000 in Process 'NK.EXE' (0x848AFAD0)
    PID:09A70236 TID:00DB01F6 REGEXT: +CHandleArray::Remove
    PID:09A70236 TID:00DB01F6 REGEXT: -CHandleArray::Remove
    PID:09A70236 TID:08B00246 REGEXT: CHandleArray::ProcessNotifications: WaitForMultipleObjects fired on the reset object
    PID:09A70236 TID:08B00246 REGEXT: CHandleArray::ProcessNotifications: Entering WaitForMultipleObjects with 2 wait objects and a timeout of 0xffffffff
    PID:00400002 TID:01F9000A SDMemory: GetDeviceInfo - Profile = SDMemory, length = 18
    PID:00400002 TID:01F9000A SDemory: GetDeviceInfo - RegQueryValueEx(Profile) returned 2
    PID:00400002 TID:01F9000A SDMemory: GetStorageID Insufficient buffer space
    SDMemory: -GetStorageID
    PID:00400002 TID:01F9000A OSAXST1: >>> Loading Module 'mspart.dll' (0xC04101B0) at address 0xEF800000-0xEF810000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:01F9000A MSPART!PD_OpenPartition: dwStoreId=DBA2D760, PartName=Part00
    PID:00400002 TID:01F9000A MSPART!PD_OpenPartition: dwStoreId=DBA2D760, PartName=Part01
    PID:00400002 TID:01F9000A OSAXST1: >>> Loading Module 'exfat.dll' (0xC04103F8) at address 0xEF8E0000-0xEF91D000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:01F9000A OSAXST1: >>> Loading Module 'diskcache.dll' (0xC0410A70) at address 0xEF8D0000-0xEF8DA000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:01F9000A CreateCache: Successful.  Cache Size: 256 KB, Start: 32, End: 29455, CreateFlags: 0.
    PID:00400002 TID:01F9000A CreateCache: Successful.  Cache Size: 256 KB, Start: 29456, End: 15079158, CreateFlags: 0.
    PID:00400002 TID:02FA003A CHub(Root tier 0)::HubStatusChangeThread - port 1, change = 0x0003, status = 0x0101
    PID:00400002 TID:02FA003A hubStatus PortEnableChange = 1
    PID:00400002 TID:02FA003A hubStatus PortEnabled = 0
    PID:00400002 TID:02FA003A hubStatus PortConnected = 1
    PID:00400002 TID:02FA003A hubStatus ForceDetach = 0
    PID:00400002 TID:02FA003A hubStatus.change.port.ConnectStatusChange = 1
    PID:00400002 TID:03B900D6 The value of ControlStatus is = 880h
    
    PID:00400002 TID:02FA003A CHub(Root tier 0)::HubStatusChangeThread - device attached on port 1
    PID:00400002 TID:02FA003A +CHub(Root tier 0)::AttachDevice - port = 1, fIsLowSpeed = 0
    PID:00400002 TID:02FA003A AttachDevice: with CHub(0xd2fd6ad0) ResetEvent
    PID:00400002 TID:02FA003A CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0
    PID:00400002 TID:02FA003A CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0
    

    The real critical problem is that during the resume the wifi module does not resume. The reported error is only the first i see in the log.

    The wifi module is VNUWLC61.


    SteMMo

    Thursday, January 24, 2013 5:50 PM
  • This is the difference  between debug logs when i switch on the wifi by GPIO pin after the startup and after the resume.

    If i switch on the usb wifi after the startup is always without errors.

    The problemm seems to be near to ndisQueueMiniportOnDriver function.


    SteMMo

    Monday, January 28, 2013 9:07 AM
  • Hi,

    Have you tried a retail build with selected prints enabled on the NDIS miniport driver alone.

    Seems like something is going wrong in the WiFi driver on resume. Maybe no implementation of power mgmt IOCTLs ,Firmware going bad etc

    Regards,

    Balaji.

    Monday, January 28, 2013 10:11 AM
  • VIA doesn't release the source code of the ARM driver (VT6656)  :(

    I wrote them and, as reply, they are sending me the driver for Linux !!!

    They have a very bad support for the drivers: i'm running the version for WinCE600 and compiled for iMX27 - i'm using WinEC700 on iMX51....


    SteMMo

    Monday, January 28, 2013 10:38 AM
  • Hi,

    Too bad. As can be seen from your log the USB device seems to come up. Without source / support it will be a little tedious.

    However from the compare log issue seems to be closely related to hive registry. The registry might sometimes be a good starting point since you don't seem to have the code.

    Regards,

    Balaji.


    • Edited by balajitrv1 Monday, January 28, 2013 12:59 PM changes
    Monday, January 28, 2013 12:48 PM
  • Comparing some output debug log I've noted that sometimes, during the suspend phase, I have more messages ... sometimes less messages or by other modules/drivers.

    I'm wondering if I could leave more time before the suspend is active (OALCPUPowerOff());

    How can i add some time in the process?? Sleep(x) does exist but I don't understand if it works.....


    SteMMo

    Tuesday, January 29, 2013 2:35 PM
  • If I switch on and off the wifi without suspend/resume -i have no problem.

    If i suspend and resume the device and then switch on the wifi i have the error.

    The log is:

    PID:00400002 TID:0810020A 	UsbHost : New Function [address(5) / layer(1)]
    PID:00400002 TID:0810020A CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY, failures = 0
    PID:00400002 TID:0810020A CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0
    PID:00400002 TID:0810020A OSAXST1: >>> Loading Module 'vnuwlc6.dll' (0xC0808248) at address 0xEE080000-0xEE0B0000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:0810020A ==>NdisInitializeWrapper
    PID:00400002 TID:0810020A <==NdisInitializeWrapper
    PID:00400002 TID:0810020A ==>NdisMRegisterMiniport: NdisWrapperHandle C4473B90
    PID:00400002 TID:0810020A ==>ndisRegisterMiniportDriver: NdisWrapperHandle C4473B90
    PID:00400002 TID:0810020A <==ndisRegisterMiniportDriver: MiniBlock C443A980
    PID:00400002 TID:0810020A <==NdisMRegisterMiniport: MiniBlock C443A980, Status 0
    
    PID:00400002 TID:0810020A Exception 'Data Abort' (0x4): Thread-Id=0810020a(pth=c040f938), Proc-Id=00400002(pprc=848afad0) 'NK.EXE', VM-active=00400002(pprc=848afad0) 'NK.EXE'
    PID:00400002 TID:0810020A PC=efca8cfc(filesys.dll+0x00038cfc) RA=efca6ddc(filesys.dll+0x00036ddc) SP=cc8cde3c, BVA=cca2d038
    PID:00400002 TID:0810020A ERROR: d:\chelanrtm14\private\winceos\coreos\filesys\reg\regapi.c line 2406:
    PID:00400002 TID:0810020A FS: Hive Exception Handler
    PID:00400002 TID:0810020A NDIS: DEBUGCHK failed in file d:\chelanrtm14\private\winceos\net\ndis\sys\configm.c at line 6663
      KdTrap: JIT debugging requested, waiting for OEM selection
      KdTrap: JIT debugging accepted
    
    !KITLRegisterDfltClient called before KitlInit. KITLGlobalState=00000080
    PID:00400002 TID:0810020A DEBUG_BREAK @ef48a410 Ignored.
    PID:00400002 TID:0810020A ==>ndisMUnload: DriverObject C4473B50
    PID:00400002 TID:0810020A ndisMUnload: MiniBlock C443A980
    PID:00400002 TID:0810020A <==ndisMUnload: DriverObject C4473B50, MiniBlock 00000000
    PID:00400002 TID:0810020A OSAXST1: <<< Unloading Module 'vnuwlc6.dll' (0xC0808248) at address 0xEE080000-0xEE0B0000 in Process 'NK.EXE' (0x848AFAD0)
    
    PID:00400002 TID:0810020A OSAXST1: >>> Loading Module 'uiproxy.dll' (0xC0808248) at address 0x40A60000-0x40A65000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00510012 TID:0810020A OSAXST1: >>> Loading Module 'uiproxy.dll' (0xC0808248) at address 0x40A60000-0x40A65000 in Process 'udevice.exe' (0xC04178F4)
    PID:00400002 TID:0810020A DlgMgr:NextControl[uFlags=12] returning 0x00000000
    PID:00400002 TID:0810020A DlgMgr: FindDlgItem id 1 returning NULL.

    Is it relative to the hive registry access??


    SteMMo

    Tuesday, January 29, 2013 3:41 PM
  • Hi,

    Even though i can't pinpoint with certainty the following lines from your log  may give us some clue:

    PID:00400002 TID:0810020A Exception 'Data Abort' (0x4): Thread-Id=0810020a(pth=c040f938), Proc-Id=00400002(pprc=848afad0) 'NK.EXE', VM-active=00400002(pprc=848afad0) 'NK.EXE'
    PID:00400002 TID:0810020A PC=efca8cfc(filesys.dll+0x00038cfc) RA=efca6ddc(filesys.dll+0x00036ddc) SP=cc8cde3c, BVA=cca2d038
    PID:00400002 TID:0810020A ERROR: d:\chelanrtm14\private\winceos\coreos\filesys\reg\regapi.c line 2406:
    PID:00400002 TID:0810020A FS: Hive Exception Handler
    PID:00400002 TID:0810020A NDIS: DEBUGCHK failed in file d:\chelanrtm14\private\winceos\net\ndis\sys\configm.c at line 6663

    There has been a data abort in code related to registry access right after NdisMRegisterMiniport which shows that the registry access would have taken place for the VIA miniport driver.

    Secondly , probably because of the first exception something has gone wrong in the miniport driver and you have another exception in configm.c which relates to ndis miniport driver.

    Also from the log the DLL for this driver has been unloaded (probably because of the above issues). So i feel you could have a look at the registry specifically at something related to BusNumber , BusType entries if possible and try to resolve the issue.

    Hope this helps.

    Regards,

    Balaji.

    Tuesday, January 29, 2013 3:53 PM
  • I agree with your analysis.

    But this is other debug log where I see the same exception, but in other location ?!?!?!??

    PID:00400002 TID:09CD02B2 	UsbHost : New Function [address(3) / layer(1)]
    PID:00400002 TID:09CD02B2 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY, failures = 0
    PID:00400002 TID:09CD02B2 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0
    PID:00400002 TID:09CD02B2 OSAXST1: >>> Loading Module 'vnuwlc6.dll' (0xC06E51D0) at address 0xEE080000-0xEE0B0000 in Process 'NK.EXE' (0x848AFAD0)
    PID:00400002 TID:09CD02B2 ==>NdisInitializeWrapper
    PID:00400002 TID:09CD02B2 <==NdisInitializeWrapper
    PID:00400002 TID:09CD02B2 ==>NdisMRegisterMiniport: NdisWrapperHandle C4471450
    PID:00400002 TID:09CD02B2 ==>ndisRegisterMiniportDriver: NdisWrapperHandle C4471450
    PID:00400002 TID:09CD02B2 <==ndisRegisterMiniportDriver: MiniBlock D3249640
    PID:00400002 TID:09CD02B2 <==NdisMRegisterMiniport: MiniBlock D3249640, Status 0
    PID:00400002 TID:09CD02B2 ==>ndisReadOffloadRegistry: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisReadOffloadRegistry: Miniport D3249870, Status c0000001, Registry 20000
    PID:00400002 TID:09CD02B2 ==>NdisMSetAttributesEx: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetupLwfMiniportHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetupNoFilterHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetupNoFilterHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetupLwfMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetupLwfMiniportHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisSetupNoFilterHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetupNoFilterHandlers : Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetupLwfMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisSetMiniportHandlers: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==NdisMSetAttributesEx: Miniport D3249870
    
    PID:00400002 TID:09CD02B2 ==>NdisMRegisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==NdisMRegisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>ndisMAllocateMiniportOffload: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisMAllocateMiniportOffload: Offload D3310790
    PID:00400002 TID:09CD02B2 ==>ndisMSetGeneralAttributes : Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisMSetGeneralAttributes : Miniport D3249870, Status 0
    
    PID:00400002 TID:09CD02B2 Exception 'Data Abort' (0x4): Thread-Id=09cd02b2(pth=c040f938), Proc-Id=00400002(pprc=848afad0) 'NK.EXE', VM-active=00da000a(pprc=c08176e8) 'explorer.exe'
    PID:00400002 TID:09CD02B2 PC=efca8cfc(filesys.dll+0x00038cfc) RA=efca6ddc(filesys.dll+0x00036ddc) SP=d326d590, BVA=cca2e288
    PID:00400002 TID:09CD02B2 ERROR: d:\chelanrtm14\private\winceos\coreos\filesys\reg\regapi.c line 2406:
    PID:00400002 TID:09CD02B2 FS: Hive Exception Handler
    PID:00400002 TID:09CD02B2 Unknown: DEBUGCHK failed in file d:\chelanrtm14\private\winceos\net\vcompat\zwapi.c at line 78
      KdTrap: JIT debugging requested, waiting for OEM selection
      KdTrap: JIT debugging accepted
    
    !KITLRegisterDfltClient called before KitlInit. KITLGlobalState=00000080
    PID:00400002 TID:09CD02B2 DEBUG_BREAK @ef17cec4 Ignored.
    PID:00400002 TID:09CD02B2 ndisMInitializeAdapter: Miniport D3249870, ndisIfUpdateInterfaceOnInitialize failed, Status c0000001
    PID:00400002 TID:09CD02B2 ==>ndisMCommonHaltMiniport: Miniport D3249870
    
    PID:00400002 TID:09CD02B2 ==>NdisMDeregisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==NdisMDeregisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==ndisMCommonHaltMiniport: Miniport D3249870
    PID:00400002 TID:09CD02B2 ==>NdisMDeregisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 <==NdisMDeregisterAdapterShutdownHandler: Miniport D3249870
    PID:00400002 TID:09CD02B2 ndisMInitializeAdapter: Miniport D3249870 INIT FAILURE: Dereferencing mini driver block
    PID:00400002 TID:02D80166 The value of ControlStatus is = 2880h
    PID:00400002 TID:03D001DA ndisDereferenceMiniport:Miniport D3249870, Ref = 0
    PID:00400002 TID:09CD02B2 ==>ndisMUnload: DriverObject C4471410
    PID:00400002 TID:09CD02B2 ndisMUnload: MiniBlock D3249640
    PID:00400002 TID:09CD02B2 <==ndisMUnload: DriverObject C4471410, MiniBlock 00000000
    PID:00400002 TID:09CD02B2 USBD:FreePipeObject(0xD32494E0), waiting for refcnt:1, try:1
    PID:00400002 TID:00B70006 OpenStreamDevice: OpenFile('vnuwlc61') failed 2 (0x00000002)
    PID:00400002 TID:00B70006 AddDevice: couldn't open device '<NULL>'
    

    ??


    SteMMo

    Tuesday, January 29, 2013 4:52 PM
  • Hi,

    From the log (above) it seems the driver initialization or miniport initialization has failed. Function like MPInitalize /MiniportInitialize or whatever its named has thrown an error and hence the adapter has shut down neatly. This can be inferred from the call to ndisMInitializeAdapter.

    ID:00400002 TID:09CD02B2 ndisMInitializeAdapter: Miniport D3249870, ndisIfUpdateInterfaceOnInitialize failed, Status c0000001

    But this gives us no further info on why we have data aborts for registry and some exception in zwapi.c just before the previous call to ndisMinitalizeAdapter from NDIS higher layers.

    If you have the filesys.map file from the current build you could look into the function / the area which is being called for this abort to happen.

    Why i am saying this is because the PID and TID where the aborts happen also matches the miniport driver TID and an abort in resume case in your driver is something to be looked into.

    Reiterating this might be annoying but if possible look into the registry / call stack when the abort happens to get some clues.

    Regards,

    Balaji.

    Tuesday, January 29, 2013 6:06 PM
  • It makes me wonder if the registry is not "ready" at the time the WiFi miniport is being reloaded, causing the exception when a required key is missing, etc. Can you compare the boot phase information in the debug output log between a normal startup and a resume startup to look for possible sequencing issues?

    Paul T.

    Tuesday, January 29, 2013 10:06 PM
  • During the boot phase the wifi is off then I see nothing about it.

    During the resume phase is again off!!!

    I've yet reported the (difference) log when i switch on/off the wifi by a GPIO: that activations were good only if they was done before the suspend/resume...

    Maybe the difference between that is really the resume phase where the hive registry not waked up well (Freescale's BSP always had problems with hive registry, especially for WinCE600, that's why we move to WinEC700).

    From the long logs we see that the sdmemory (and related) driver is reloaded (just before the exceptions) - i don't know why ...


    SteMMo

    Wednesday, January 30, 2013 8:59 AM