locked
Don't see the object RRS feed

  • Question

  • Hi,
    In tutorial 1 of this,
    http://www.microsoft.com/en-us/download/details.aspx?id=9053

    I've finished all of the steps till page 30 but I don't know why I can't see "EAISolution" within Solution explorer below.


    Many Thanks & Best Regards, Hua Min


    • Edited by Jackson_1990 Wednesday, September 5, 2012 2:09 AM
    Wednesday, September 5, 2012 2:08 AM

Answers

  • Where is orchestration Toolbox? How can I drag the Receive shape, according to the above step I currently mentioned that is on page 34?


    Many Thanks & Best Regards, Hua Min


    There is not any thing like orchestration Toolbox in view menu, just toolbox as below


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    • Marked as answer by Jackson_1990 Thursday, September 6, 2012 5:22 AM
    • Unmarked as answer by Jackson_1990 Friday, September 7, 2012 3:15 AM
    • Marked as answer by Jackson_1990 Friday, September 7, 2012 8:21 AM
    Thursday, September 6, 2012 5:17 AM
  • Sorry for this step on page 35
    You can alphabetize the tools in the Toolbox by right-clicking the BizTalk Orchestrations tab and clicking Sort Items Alphabetically. This makes each shape easier to find.

    Can you please tell me where 'Orchestrations tab' is?

    Many Thanks & Best Regards, Hua Min

    Hi,

    The orchestration tab is the toolbox that is shown in the rightside of the above image in previous post ( Where receive is highlighted)

    by right clicking the BiztalkOrchestration under the toolbox(Right side of image in above post- receive highlighted) , you can able to view the sort alphabetic option.


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    • Marked as answer by Jackson_1990 Friday, September 7, 2012 8:21 AM
    Thursday, September 6, 2012 6:47 AM

All replies

  • That's OK. 

    If there is only single project, the solution is not visible.

    Add another project and the solution will be visible.

    This option is configurable in the Visual Studio, as I can remember.


    Leonid Ganeline [BizTalk MVP] BizTalkien: Advanced Questions

    Wednesday, September 5, 2012 3:03 AM
    Moderator
  • Many thanks. How can I do this that is in Page 32 of that?
    3.    In the Open Project dialog box, click EAISolution, and then click Open.

    Many Thanks & Best Regards, Hua Min

    Wednesday, September 5, 2012 3:19 AM
  • If you have downloaded the project or have created it, you have to open it, if I understand your question properly. Start the Visual Studio and open this project.

    Leonid Ganeline [BizTalk MVP] BizTalkien: Advanced Questions


    Wednesday, September 5, 2012 7:04 AM
    Moderator
  • Thanks. When I open visual studio, I only see the above screenshot in Solution explorer.

    Many Thanks & Best Regards, Hua Min

    Wednesday, September 5, 2012 7:09 AM
  • Hi,

    As Leonid mentioned this is the solution that you are seeing currently. It just has one project. You can also open up the solution from the file directory containing the solution from windows explorer. It will have the .sln file with the solution name.


    Regards,
    Bali
    MCTS: BizTalk Server 2010,BizTalk Server 2006 and WCF
    My Blog:dpsbali-biztalkweblog
    -----------------------------------------------------
    Mark As Answer or Vote As Helpful if this helps.

    Wednesday, September 5, 2012 7:31 AM
  • Thanks. How to open this project - 'EAISolution'?

    Many Thanks & Best Regards, Hua Min

    Wednesday, September 5, 2012 7:38 AM
  • The EAISolution is open, as it has the EAISchemas as the one project you dont see the solution directory in visual studio.

    Regards,
    Bali
    MCTS: BizTalk Server 2010,BizTalk Server 2006 and WCF
    My Blog:dpsbali-biztalkweblog
    -----------------------------------------------------
    Mark As Answer or Vote As Helpful if this helps.

    • Marked as answer by Jackson_1990 Wednesday, September 5, 2012 7:56 AM
    • Unmarked as answer by Jackson_1990 Wednesday, September 5, 2012 8:54 AM
    Wednesday, September 5, 2012 7:46 AM
  • Thanks. For this step below
    5.    In Orchestration Designer, from the orchestration Toolbox, drag the Receive shape to the orchestration design surface, and drop it into the space indicated between the Begin (green circle) and End (red octagon) shapes. The Receive shape receives the inventory request message from the warehouse.
    The following figure shows the new Receive shape.

    on page 34, can you tell me where Receive shape is?

    Many Thanks & Best Regards, Hua Min

    Wednesday, September 5, 2012 8:55 AM
  • Thanks. For this step below
    5.    In Orchestration Designer, from the orchestration Toolbox, drag the Receive shape to the orchestration design surface, and drop it into the space indicated between the Begin (green circle) and End (red octagon) shapes. The Receive shape receives the inventory request message from the warehouse.
    The following figure shows the new Receive shape.

    on page 34, can you tell me where Receive shape is?

    Many Thanks & Best Regards, Hua Min

    Hi,

    You can able to view the ToolBox in the Orchestration in the left side. if not able to view go to View - > ToolBox.

    In the tool box you can able to see a Receive shape ...


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    Wednesday, September 5, 2012 9:54 AM
  • Which toolbox should I choose below?

    Many Thanks & Best Regards, Hua Min

    Wednesday, September 5, 2012 10:04 AM
  • Which toolbox should I choose below?

    Many Thanks & Best Regards, Hua Min

    There is only one toolbox in the list, you have chosen the ToolBars instead of toolbox. :-)

    choose the ToolBox that is available above the ToolBars menu you selected (Shortcut - ctrl + Alt + x)


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    Wednesday, September 5, 2012 10:53 AM
  • Where is orchestration Toolbox? How can I drag the Receive shape, according to the above step I currently mentioned that is on page 34?


    Many Thanks & Best Regards, Hua Min


    • Edited by Jackson_1990 Thursday, September 6, 2012 2:46 AM
    Thursday, September 6, 2012 1:45 AM
  • Where is orchestration Toolbox? How can I drag the Receive shape, according to the above step I currently mentioned that is on page 34?


    Many Thanks & Best Regards, Hua Min


    There is not any thing like orchestration Toolbox in view menu, just toolbox as below


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    • Marked as answer by Jackson_1990 Thursday, September 6, 2012 5:22 AM
    • Unmarked as answer by Jackson_1990 Friday, September 7, 2012 3:15 AM
    • Marked as answer by Jackson_1990 Friday, September 7, 2012 8:21 AM
    Thursday, September 6, 2012 5:17 AM
  • Sorry for this step on page 35
    You can alphabetize the tools in the Toolbox by right-clicking the BizTalk Orchestrations tab and clicking Sort Items Alphabetically. This makes each shape easier to find.

    Can you please tell me where 'Orchestrations tab' is?

    Many Thanks & Best Regards, Hua Min

    Thursday, September 6, 2012 6:35 AM
  • Sorry for this step on page 35
    You can alphabetize the tools in the Toolbox by right-clicking the BizTalk Orchestrations tab and clicking Sort Items Alphabetically. This makes each shape easier to find.

    Can you please tell me where 'Orchestrations tab' is?

    Many Thanks & Best Regards, Hua Min

    Hi,

    The orchestration tab is the toolbox that is shown in the rightside of the above image in previous post ( Where receive is highlighted)

    by right clicking the BiztalkOrchestration under the toolbox(Right side of image in above post- receive highlighted) , you can able to view the sort alphabetic option.


    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    • Marked as answer by Jackson_1990 Friday, September 7, 2012 8:21 AM
    Thursday, September 6, 2012 6:47 AM
  • Many thanks. Sorry for this step at the end of page 44

    7.    In the Select Artifact Type dialog box, do the following:

    Use this    To do this
    Current Project    Expand References, and then select EAISchemas.
    Type Name    Select Request.

    I don't know why I don't see EAISchemas below


    while inside the project, I do have created 'EAISchemas' (see below)


    Many Thanks & Best Regards, Hua Min



    • Edited by Jackson_1990 Thursday, September 6, 2012 8:34 AM
    Thursday, September 6, 2012 8:29 AM
  • Any advice to this?

    Many Thanks & Best Regards, Hua Min

    Friday, September 7, 2012 3:15 AM
  • Any advice to this?

    Many Thanks & Best Regards, Hua Min

    Hi,

    right click the references in the EAIOrchestration and select

    Add Reference -> Select Project Tab - > then select the EAISchema - > Click OK. ( This step is to add the reference to the another project in the same solution. you need to build the solution and perform this)



    Regards - Rajasekhar.R ' Don't forget to mark the post as answer or vote as helpful if it does,

    Friday, September 7, 2012 4:50 AM