none
AM3358 Beagle Bone Black : Kernel not coming up RRS feed

  • Question

  • Hi,

    I am working on the AM335X processor,  I successfully booted the board (beagle bone black) till E-boot and while booting the NK.bin I got stucked. Don't know where it is going wrong. 

    I am pasting the logs below, I removed all the drivers and most of the components from the catalog item , While booting the kernel i am getting the following logs but after that no messages are coming, so please help me to resolve the issue as soon as possible..

    Thanks in advance

    LOGS:

    Launch Windows CE image by jumping to 0x8000e260...

    Windows CE Kernel for ARM (Thumb Enabled) Built on Jan  6 2011 at 16:15:31
    ProcessorType=0c08  Revision=2 CpuId=0x413fc082
    OEMAddressTable = 8000e43c
    +OEMInit
    BSP_AM33X CPU CP15 Control Register = 0xc5387f
    CPU CP15 Auxiliary Control Register = 0x42
    IT IS A INVALID BOARD
    Initializing VFP, FPSID=410330c3
    +OALTimerInit(1, 24000, 200)
    -OALTimerInit
    +OALSRAMFnInit()
    +OALPerformanceTimerInit()
    High Performance Frequecy is 24 MHz---
    g_oalRetailMsgEnable:0 @ 351
    -OALArgsQuery(pData = 0x80000044)
    -OALArgsQuery(OALFlags = 0x00000000)
    g_oalRetailMsgEnable:0 @ 357
    -OEMInit
    NKStartup done, starting up kernel. nCpus = 1
    Windows CE KernelInit
    Error Reporting Memory Reserved, dump size = 0004b000
    Booting Windows CE version 7.00 for (ARM)
    Memory Configuring: Total pages: 105173, Filesystem pages = 32751
    Booting kernel with clean memory configuration:
    Total Memory Sections:3
    [0] (static): start: 834dc000, extension/attributes: 00027000, length: 09ad5000
    [1] (dynamic): start: 00960000, extension/attributes: 00028800, length: 0a000000
    [2] (dynamic): start: 00900000, extension/attributes: 00018800, length: 06000000

    After this no messages....


    • Edited by Raja46 Wednesday, December 18, 2013 4:33 AM
    Wednesday, December 18, 2013 4:32 AM

All replies

  • The log is minimal and hence it doesnt give the clear idea.

    Perform a debug build and try to capture the log for better understanding.

    From the message it is clear that OEMInit is done issue is while NKStartup

    It might be related to memory configuration, Check the config files for memory configurations

    --- Misbah


    Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com email-misbah.khan@tes-dst.com

    Wednesday, December 18, 2013 5:45 AM
  • Thank You!!

    This logs are from the Debug build only, The debug messages are not get displayed, may be the zones are not enabled, will you guide me how to enable those zones because they are in the private folder, so please give me a way to display the debug messages

    Wednesday, December 18, 2013 8:00 AM