locked
proximity sample is not working in tablet

    Question

  • i have deployed the proximity sample code on the two tablets

    after i launch the application and browse for peer i am able to find the other tablet then if try to connect the tablets it failing to connect by throwing the following errors on both tablet

    Peer finding side Exception from HRESULT : 0X80043C04.

    Peer acceptance side Value doesnot fall within the expected range


    • Changed type 198gp Monday, September 24, 2012 9:59 AM type error
    • Edited by 198gp Monday, September 24, 2012 10:01 AM
    Monday, September 24, 2012 9:57 AM

Answers

  • 198gp,

    I am looking into this for you.

    Best Wishes - Eric

    • Marked as answer by 198gp Friday, November 16, 2012 12:11 PM
    Monday, September 24, 2012 11:34 PM
    Moderator
  • hi Eric,

    did you got the solution for the problem.

    thanks in advance,

    • Marked as answer by 198gp Friday, November 16, 2012 12:11 PM
    Saturday, October 13, 2012 5:26 AM
  • As mentioned in the proximity sample discussion, this sounds like a hardware issue. It is further evidence that one of your devices has a hardware issue in that your other device works as expected. Your best bet is to work with the manufacturer of your device to determine the cause of the error.

    -Mike [MSFT]



    Tuesday, October 16, 2012 1:15 AM

All replies

  • 198gp,

    I am looking into this for you.

    Best Wishes - Eric

    • Marked as answer by 198gp Friday, November 16, 2012 12:11 PM
    Monday, September 24, 2012 11:34 PM
    Moderator
  • hi Eric,

    did you got the solution for the problem.

    thanks in advance,

    • Marked as answer by 198gp Friday, November 16, 2012 12:11 PM
    Saturday, October 13, 2012 5:26 AM
  • As mentioned in the proximity sample discussion, this sounds like a hardware issue. It is further evidence that one of your devices has a hardware issue in that your other device works as expected. Your best bet is to work with the manufacturer of your device to determine the cause of the error.

    -Mike [MSFT]



    Tuesday, October 16, 2012 1:15 AM
  • Hi 198gp,

    Have you found a solution for this problem? We are facing exactly the same problem.

    Tuesday, October 23, 2012 8:45 PM
  • Hi 198gp,

    If I disconnect my ARM tablets from the wireless AP, then the proximity sample is working on the tablet. It seems to be a concurrency problem.

    • Marked as answer by 198gp Friday, October 26, 2012 8:49 AM
    • Unmarked as answer by 198gp Friday, October 26, 2012 8:52 AM
    Tuesday, October 23, 2012 10:28 PM
  • Hi Renjie Huang

    i think this application does not support cross connection(any one wi-fi or wi-fi direct will work at same time). 

    Friday, November 16, 2012 12:10 PM