Power manager, suspend timer not expiring RRS feed

  • Question

  • Hi all, I'm running Win ce 5.0 on a ARM device. It seems if I boot my system with AC power plugged in, and just let it come up until the explorer is ready, the "ACSuspend" event does not get fired. I don't touch the screen yet, so no PM event has been fired yet. If I leave the device like it is, it will just run forever. Has this been an issue in the past ? I don't see any update regarding this (yet). Anybody an idea ? Thanks a lot in advance !
    • Moved by Jesse Jiang Friday, December 16, 2011 8:56 AM (From:Windows Mobile Development)
    Wednesday, December 14, 2011 8:24 AM

All replies

  • Hello,


    I think your issue should be raised in the Windows Embedded Compact Platform Development. I believe they will know more information of this issue than us, and I will move this one to that forum.


    Thanks for your understanding,


    Best regards,


    Jesse Jiang [MSFT]
    MSDN Community Support | Feedback to us
    Friday, December 16, 2011 8:56 AM
  • In the platform.reg file do the following configuration, this is just an example for you, you need to have the required timeout value as per your requirement :-


        "ACUserIdle"=dword:3c               ; in seconds
        "ACSystemIdle"=dword:12c    ; in seconds
        "ACSuspend"=dword:0                 ; in seconds
        "BattUserIdle"=dword:3c             ; in seconds
        "BattSystemIdle"=dword:b4   ; in seconds
        "BattSuspend"=dword:12c             ; in seconds
        "ACSuspendTimeout"=dword:0                          ; timeout disabled on AC power
        "ACResumingSuspendTimeout"=dword:F          ; 15 seconds
        "BattSuspendTimeout"=dword:B4                       ; 3 minutes (180 seconds) on battery
        "BattResumingSuspendTimeout"=dword:F        ; 15 seconds
         "Default"=dword:3           ; D3
         ;"Default"=dword:1           ; D1
         "Flags"=dword:0             ;



    Senior Design Engineer T.E.S Electronic Solutions (Bangalore-India)
    Friday, December 16, 2011 9:51 AM
  • The issue you are mentioning here may be related to this blog,

    Wednesday, December 21, 2011 12:42 PM
  • Thanks for all the replies.

    @Vinoth: I had a quick glance at it but parked it until the holidays were over, but now I cannot access that blog. Would it be possible to set it online again ? Thanks a lot in advance, it seems like this is the thing I need.

    Tuesday, January 3, 2012 11:05 AM
  • The link is still exist. I think the server is down or slow. May be try sometime later today.
    Tuesday, January 3, 2012 11:32 AM