locked
Boot from SDIO support RRS feed

  • Question

  • Hi.

    Does WES 7 support boot from SDIO (not through USB)?

    Thursday, February 17, 2011 5:11 PM

All replies

  • I have not seen SDIO boot support in WES7. Do you have a system that supports SDIO boot devices in the BIOS?

    -Sean


    www.sjjmicro.com / www.seanliming.com / www.annabooks.com, Book Author - ProGuide to WES 7, XP Embedded Advanced, WEPOS / POS for .NET Step-by-Step
    Thursday, February 17, 2011 9:13 PM
  • Yes, my system supports SDIO boot in the BIOS. I can boot Linux from SDIO.
    Sunday, February 20, 2011 11:52 AM
  • i think richard knows about SD support or at least you may will find some info in mp3car.com
    "Mark/Propose As Answer" if you got one.
    Wednesday, February 23, 2011 5:12 PM
  • Am 17.02.2011 18:11, schrieb Leonid F:
    > Hi.
    >
    > Does WES 7 support boot from SDIO (not through USB)?
    >
     
    Yes, it can be done. I did it but it needed some additional SDIO drivers
    from the board manufacturer (Kontron im my case) and a time-consuming
    procedure to got it to work.
    First needed to set up the system to run on a HDD and initialize all the
    registry entries for the SDIO interface by a one-time access to it. Then
    the image could be copied to the SD card and boot and run from there.
    According to Kontron, there is no way around this procedure and I dint
    have the time to try to establish it without the HDD detour.
     
    Friday, February 25, 2011 3:59 PM
  • WES7 SP1 gets SD Boot Support.

     

    SD Boot:

     

    -Enable building and installation of Windows Embedded Standard 7 images on SD card.
    -Boot a Windows Embedded Standard 7 image from an SD card (no roaming)

    "Mark/Propose As Answer" if you got one.
    Saturday, February 26, 2011 1:26 PM
  • This is great news!

    I will try and will post the results.

    Sunday, February 27, 2011 9:33 AM
  • I guess the cat is out of the bag. I'm not sure where Knarz got his information but we were planning on announcing it shortly :)

    I can confirm we are planning to supply SDBoot as an additional package with Windows Embedded Standard SP1.

    Note this SDBoot package is not present in the preview of SP1 that has been available. The package will be selectable in ICE and IBW when building from the SP1 Distribution Share.

    We hope to make SP1 available in the coming weeks and will announce it here as soon as we have released it.

    Thanks
    -Dave Massy
    Windows Embedded Standard Program Management


    Dave Massy, Program Manager
    Sunday, February 27, 2011 6:36 PM
  • Thank you for confirming the issue.

    Is the SP1 will be available for users with Evaluation version of WES7?

    Sunday, February 27, 2011 7:10 PM
  • Hi Leonid,

    Yes. We'll be making SP1 available in the same way and through the same channels as the RTM version. you'll be able to install the toolkit and distribution shares to update an existing installation or as a fresh installation.

    In addition we will also be making available update cabs to allow exisitng Windows Embedded Standard 7 images to be updated to SP1.

     


    Dave Massy, Program Manager
    Sunday, February 27, 2011 7:14 PM