none
WINCE 5.0 finding componnents RRS feed

  • Question

  • I ma trying to rebuild and old Wince 5.0 image.

    I only have the image, and got the ceconfig.h.

    Who I can find with component to select in in order to get this modules into the project.

    #define CE_MODULES_LPCD 1
    #define CE_MODULES_LPCRT 1
    #define CE_MODULES_RNAAPP 1
    #define CE_MODULES_CONNMC 1
    #define CE_MODULES_NDISPWR 1
    #define CE_MODULES_ETHMAN 1
    #define CE_MODULES_NDISUIO 1

    #define CE_MODULES_AUTORAS 1
    #define CE_MODULES_PPP 1
    #define CE_MODULES_TAPI 1

    #define DCOM_MODULES_DLLHOST 1
    #define DCOM_MODULES_DCOMSSD 1
    #define DCOM_MODULES_RPCRT4 1
    #define DCOM_MODULES_RPCLTCCM 1
    #define DCOM_MODULES_RPCLTSCM 1
    #define WCESHELLFE_MODULES_CONNPNL 1
    #define COREDLL_TAPILIB 1
    #define PPP_PPP2SRVSTUB 1

    #define OLE32_MCOMBASE 1
    #define OLE32_MCOMMEM 1
    #define OLE32_MCOMSTR 1
    #define OLE32_MCOMMON 1
    #define OLE32_MCOMLIB 1
    #define OLE32_OLE232 1
    #define OLE32_DOCFILE 1
    #define OLE32_MSF 1
    #define OLE32_EXP 1
    #define OLE32_MCOMGUID 1
    #define OLE32_MCOMSTM 1
    #define OLEAUT32_IDISPPROXY 1

    Thanks,

    David.

    Wednesday, April 4, 2012 2:08 PM

Answers

  • Ignore the first part of the macros, like CE_MODULES.   Search for the end part, like LPCD, in the catalog.   If no hits, search the BAT files in Public\CEBASE, then check the "if" condition that causes LPCD to be added to CE_MODULES.

    Bruce Eitman (eMVP)
    Senior Engineer
    Bruce.Eitman AT Eurotech DOT com
    My BLOG http://geekswithblogs.net/bruceeitman

    Eurotech Inc.
    www.Eurotech.com

    • Marked as answer by Duvidw Thursday, April 5, 2012 2:22 PM
    Wednesday, April 4, 2012 2:37 PM
    Moderator
  • Are you asking for sysgen variables which are selected, because using it you would be able to find the modules which are selected ?

    You can find the sysgen settings at the location " WINCE700\OSDesigns\<your platform>\<your platform>\Wince700\<platform_CPU_Retail\cesysgen"

    SysgenSettings.out file

    Hope this will help !

    --- Misbah


    Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com email-misbah.khan@tes-dst.com

    • Marked as answer by Duvidw Thursday, April 5, 2012 2:22 PM
    Wednesday, April 4, 2012 2:38 PM

All replies

  • Ignore the first part of the macros, like CE_MODULES.   Search for the end part, like LPCD, in the catalog.   If no hits, search the BAT files in Public\CEBASE, then check the "if" condition that causes LPCD to be added to CE_MODULES.

    Bruce Eitman (eMVP)
    Senior Engineer
    Bruce.Eitman AT Eurotech DOT com
    My BLOG http://geekswithblogs.net/bruceeitman

    Eurotech Inc.
    www.Eurotech.com

    • Marked as answer by Duvidw Thursday, April 5, 2012 2:22 PM
    Wednesday, April 4, 2012 2:37 PM
    Moderator
  • Are you asking for sysgen variables which are selected, because using it you would be able to find the modules which are selected ?

    You can find the sysgen settings at the location " WINCE700\OSDesigns\<your platform>\<your platform>\Wince700\<platform_CPU_Retail\cesysgen"

    SysgenSettings.out file

    Hope this will help !

    --- Misbah


    Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com email-misbah.khan@tes-dst.com

    • Marked as answer by Duvidw Thursday, April 5, 2012 2:22 PM
    Wednesday, April 4, 2012 2:38 PM