none
Virtual CEPC Image Download Error RRS feed

  • Question

  • Hi

    I have done all phases of the book
    "Getting_Started_With_Virtual_CEPC.pdf" , but at the time of Attach
    to the device I get the following error in visual studio Output
    window
    :
    ===================================================
    (Corecon) Download initiated...
    (Corecon) Error: Failed to download image. Please check connection
    settings.
    PB Debugger The Kernel Debugger has been disconnected
    successfully.
    (Corecon) Detachment from the target device was successful. Make sure
    that you also detach or close
    all other tools that are connected to the
    device.
    ===================================================

    and in Windows Virtual PC Window i have this
    messages:
    ===================================================
    Hit space to enter configuration menu 5...

    Send DHCP Discover Message (attemp 1)
    Get Response from DHCP server 192.168.2.1 with address
    192.168.2.128
    Send ARP request for address 192.168.2.128
    No ARP response, assuming ownership of 192.168.2.128
    Send BOOTME message (device name PC-0003FF70D4AE, attempt 1)
    Accept download from 192.168.2.104 port 64649
    ERROR: BootTransportPb: TFTP timeout occured!
    ERROR: BootDownloadBin!ImageType: BootTransportRead Failed!

    *** Setting to low power state ***

    *** HALT
    ***
    ===================================================

    In addition, it is necessary to say that i have a PC with Gigabyte
    GA-P55-USB3 rev 1 with Windows 7 Ultimate and my Network Adaptor is
    Realtek PCIe GBE Family Controler.


    Thanks 

    Monday, September 27, 2010 4:54 AM

All replies