none
errors occur when performing attach device to a device emulator RRS feed

  • Question

  • I've successfully built a OS image for device emulator in VC2005 platform builder guided by: Creating a Device Emulator Image Using the OS Design Wizard (Windows Embedded CE 6.0).

    I also have finished some properties setting guided.

    When I performed attach device, some errors occurs as below:

     4294853104 PID:400002 TID:5860006 Set: OID_IRDA_REACQUIRE_HW_RESOURCES
    4294853108 PID:400002 TID:5860006 Irsir: Create file [COM2:] failure = 0x00000037 [55]
    4294853108 PID:400002 TID:5860006 IrSIR: StartDevice failed - 0xc0010007.
    4294853117 PID:400002 TID:5d20002 IRLAP_LINKCONTROL_REQ failure - 0x4e28

    How can I fix this problem?

    many thanks.

    Saturday, August 13, 2016 4:49 PM

All replies

  • I found the emulator properties->network should be connected network card instead.

    Another problem:

    The required virtual machine network driver could not be found. Make sure the virtual PC 2007 is installed. You can install virtualPC 2007 from ……..

    Sunday, August 14, 2016 4:26 PM
  • Hi MJianfen,

    Can you explain why you are using CE 6 and not Compact 2013?  Unfortunately, CE 6 is out of support but Compact 2013 supports Hyper-V through VCEPC BSP.  If this is for a new project, I suggest you look at some of the newer OS options.

    Sincerely,

    IoTGirl

    Monday, August 15, 2016 7:38 PM
    Moderator
  • Hi IoTGirl,

    Thanks for your suggestion. I am just preparing for my class and need to familiar with the basic concept through installing.

    M

    Tuesday, August 16, 2016 1:32 AM