Answered by:
mahreendr@yahoo.com haroon rashid Graphics Sample ID hmm111
Question

with love small basic members i am trying to rotate a line around another line i have tried with ( haroon rashid Graphics Sample ID hmm111) but can not do it the code( GraphicsWindow.BackgroundColor = "steelblue"
GraphicsWindow.Width = 1000
GraphicsWindow.Height = 600
'miangul 1
GraphicsWindow.PenColor = "Blue"
For i = 1 To 32
GraphicsWindow.PenWidth = 4
GraphicsWindow.DrawLine(i * 24, 30, i * 24, 580 )
endfor
'miangul 2
GraphicsWindow.PenColor = "yellow"
For i = 1 To 32
GraphicsWindow.PenWidth = 4
GraphicsWindow.Drawellipse(i * 24, 30, i * 24, 580)
endfor) i cant upload programs to small basic fourm i am ineed of if somebody can help with regards haroon rashidSaturday, May 14, 2016 7:37 AM
Answers

* An ID: hmm111 does not exist.
* Rotate a line around another line ????
To 'rotate' a line, you either
1.) need it as a see Shapes.AddLine and then you can Shapes.Rotate (about its center) or LDShapes.RotateAbout (about a specified point/pole x,y)
or
2.) draw a new line GraphicsWindow.DrawLine with a different slope, where SB uses the two point form of a line (x1,y1, x2,y2), so that y = m * x + d with m = (y2y1)/(x2x1) = dy/dx = tan(angle)
Maybe see a translated version (peculiarly there does'nt seem to be an english version):
https://de.wikipedia.org/wiki/Geradengleichung (Zweipunkteform)
https://de.wikipedia.org/wiki/Zweipunkteform
Donno the engl. equivalent.
About 2.) see a sample below:
GraphicsWindow.Top = 0 GraphicsWindow.Width = 1000 GraphicsWindow.Height = 600 + 40 GraphicsWindow.BackgroundColor = "SteelBlue" 'miangul 1 GraphicsWindow.PenColor = "Blue" GraphicsWindow.PenWidth = 4 ' stays as long as you change it again For i = 1 To 32 GraphicsWindow.DrawLine(i*24,30, i*24,580) EndFor 'miangul 2 GraphicsWindow.PenColor = "Yellow" For i = 1 To 32 GraphicsWindow.DrawEllipse(i*24,30, i*24,580) EndFor '' *** SAMPLE *** vary x1,y1 and y2, deg '' From fixed Point1 (x1,y1) ... x1 = GraphicsWindow.Width / 2 y1 = GraphicsWindow.Height  30 '' ... up to end Point2 (x2,y2) with a slope of deg° y2 = 30 deg = 57 '' [°] eg. deg° within ]0, 180[ , counter clockwise from Pnt1(x1,y1) where 0° = 3h '  rad = Math.GetRadians(180  deg) '' Correction for SB coordinate system and > [rad] x2 = (y2y1) / Math.Tan(rad) + x1 '' m = dy/dx = (y2y1)/(x2x1) = tan(angle) , m .. slope '  GraphicsWindow.PenColor = "Red" GraphicsWindow.PenWidth = 10 GraphicsWindow.DrawLine(x1,y1, x2,y2)
 Edited by Pappa LapubEditor Saturday, May 14, 2016 11:41 AM
 Proposed as answer by Ed Price  MSFTMicrosoft employee Sunday, June 5, 2016 2:42 AM
 Marked as answer by Nonki Takahashi Wednesday, June 8, 2016 5:58 AM
Saturday, May 14, 2016 11:39 AMAnswerer 
For the rotation of a line as pointer on a stopwatch I published a program for the Challenge of the month august 2013. The programming code is BSC2060
Perhaps this is something you are looking for.
Jan [ WhTurner ] The Netherlands
 Proposed as answer by Ed Price  MSFTMicrosoft employee Sunday, June 5, 2016 2:42 AM
 Marked as answer by Nonki Takahashi Wednesday, June 8, 2016 5:58 AM
Saturday, May 14, 2016 3:29 PMAnswerer
All replies

* An ID: hmm111 does not exist.
* Rotate a line around another line ????
To 'rotate' a line, you either
1.) need it as a see Shapes.AddLine and then you can Shapes.Rotate (about its center) or LDShapes.RotateAbout (about a specified point/pole x,y)
or
2.) draw a new line GraphicsWindow.DrawLine with a different slope, where SB uses the two point form of a line (x1,y1, x2,y2), so that y = m * x + d with m = (y2y1)/(x2x1) = dy/dx = tan(angle)
Maybe see a translated version (peculiarly there does'nt seem to be an english version):
https://de.wikipedia.org/wiki/Geradengleichung (Zweipunkteform)
https://de.wikipedia.org/wiki/Zweipunkteform
Donno the engl. equivalent.
About 2.) see a sample below:
GraphicsWindow.Top = 0 GraphicsWindow.Width = 1000 GraphicsWindow.Height = 600 + 40 GraphicsWindow.BackgroundColor = "SteelBlue" 'miangul 1 GraphicsWindow.PenColor = "Blue" GraphicsWindow.PenWidth = 4 ' stays as long as you change it again For i = 1 To 32 GraphicsWindow.DrawLine(i*24,30, i*24,580) EndFor 'miangul 2 GraphicsWindow.PenColor = "Yellow" For i = 1 To 32 GraphicsWindow.DrawEllipse(i*24,30, i*24,580) EndFor '' *** SAMPLE *** vary x1,y1 and y2, deg '' From fixed Point1 (x1,y1) ... x1 = GraphicsWindow.Width / 2 y1 = GraphicsWindow.Height  30 '' ... up to end Point2 (x2,y2) with a slope of deg° y2 = 30 deg = 57 '' [°] eg. deg° within ]0, 180[ , counter clockwise from Pnt1(x1,y1) where 0° = 3h '  rad = Math.GetRadians(180  deg) '' Correction for SB coordinate system and > [rad] x2 = (y2y1) / Math.Tan(rad) + x1 '' m = dy/dx = (y2y1)/(x2x1) = tan(angle) , m .. slope '  GraphicsWindow.PenColor = "Red" GraphicsWindow.PenWidth = 10 GraphicsWindow.DrawLine(x1,y1, x2,y2)
 Edited by Pappa LapubEditor Saturday, May 14, 2016 11:41 AM
 Proposed as answer by Ed Price  MSFTMicrosoft employee Sunday, June 5, 2016 2:42 AM
 Marked as answer by Nonki Takahashi Wednesday, June 8, 2016 5:58 AM
Saturday, May 14, 2016 11:39 AMAnswerer 
For the rotation of a line as pointer on a stopwatch I published a program for the Challenge of the month august 2013. The programming code is BSC2060
Perhaps this is something you are looking for.
Jan [ WhTurner ] The Netherlands
 Proposed as answer by Ed Price  MSFTMicrosoft employee Sunday, June 5, 2016 2:42 AM
 Marked as answer by Nonki Takahashi Wednesday, June 8, 2016 5:58 AM
Saturday, May 14, 2016 3:29 PMAnswerer 
The topic of rotation is one of the challenges in May's challenge of the month:
 Proposed as answer by Ed Price  MSFTMicrosoft employee Sunday, June 5, 2016 2:42 AM
Saturday, May 14, 2016 3:30 PMAnswerer