none
[SOLVED] How to configure and connect remote desktop connection for WINCE 7? RRS feed

  • Question

  • Hello friends,

    As, I am using AM335x BSP and I am trying to use "cerdisp  -c" which uses the RDP protocol to connect the target machine with the remote host(x86 machine)

    I have followed the steps as mentioned by Keshava GN in the following links -

    http://wec7.blogspot.in/2014/02/remote-display-of-wec7-device-using.html

    After following the mentioned steps for no physical LCD display, I am unable to connect the host machine after getting the device name in the host application dialog box ???


    Friday, January 9, 2015 1:18 PM

Answers

  • Steps to configure and connect Remote Desktop Connection for WINCE7 : -

    1. Select the SYSGEN_RDP from catalog Items

    2. Set BSP_NOTOUCH=1(Headless Pannel ) but display driver is required.

    3. a. Select Headless Config (800x600). It contains 16 bpp as session bpp. If we will use 32 bpp then it wont work.

       b. KITL state = disabled

       c. VMINI = enabled

    4. Add the following entry in platform.bib

       cerdisp.exe             $(_FLATRELEASEDIR)\cerdisp.exe            NK

    5. Add the following entry in platform.reg

      [HKEY_LOCAL_MACHINE\Startup]
    "Process1"="cerdisp -c"
    "Process1Delay"=dword:00001388

    Run the host application before auto launching the target device application..



    Monday, January 12, 2015 7:17 AM