none
Error Installing .NET Framework 3.0 SP1 RRS feed

  • Question

  • OK, I'm getting frustrated.  I have uninstalled all .NET frameworks, from 1.1 to 3.0 using the .NET cleanup application, reinstalled all .NET frameworks, from 1.1 to 3.0, and I still get the following error when trying to install .NET Framework 3.0 SP1:

    [01/04/09,21:47:49] Microsoft .NET Framework 3.0a: [2] Error: Installation failed for component Microsoft .NET Framework 3.0a. MSI returned error code 1603
    [01/04/09,21:49:23] Microsoft .NET Framework 3.0SP1 x86: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [01/04/09,21:49:23] Microsoft .NET Framework 3.0SP1 x86: [2] Setup Failed on component Microsoft .NET Framework 3.0SP1 x86
    [01/04/09,21:49:28] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0SP1 x86 is not installed.
    [01/04/09,23:02:42] Microsoft .NET Framework 3.0a: [2] Error: Installation failed for component Microsoft .NET Framework 3.0a. MSI returned error code 1603
    [01/04/09,23:04:16] Microsoft .NET Framework 3.0SP1 x86: [2] Error code 1603 for this component means "Fatal error during installation.
    "
    [01/04/09,23:04:16] Microsoft .NET Framework 3.0SP1 x86: [2] Setup Failed on component Microsoft .NET Framework 3.0SP1 x86
    [01/04/09,23:04:21] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0SP1 x86 is not installed. 

    Like I mentioned, I have uninstalled and reinstalled using the .NET cleanup tool and followed the steps from http://support.microsoft.com/kb/923100.  I have done this three times and still get the above error installing .NET Framework 3.0 SP1.  Any ideas or solutions would be of great help.

    Thanks.   
    Monday, January 5, 2009 8:12 PM

Answers

  • Robert Q. Johnson said:

     I have framework 1.1 through 2.0 SP1 installed.  Just to make sure, it seems that installing 3.5 SP1 will resolve all my issues and install 2.0 SP2, 3.0, 3.0 SP1, 3.5, and 3.5 SP1.  Is this correct?  It sounds to good to be true!!!!!

    No, as I previously said, we don't need to install previous versions of .NET Framework prior to .NET Framework 3.5 sp1, just install .NET Framework 3.5 SP1 alone.

    Unlike service pack for other software, actually .NET Framework service pack is an independent installation.
    One without any previous versions can still directly install .NET Framework 3.5 SP1 (no need to install any of 2.0, 3.0, 3.5 and their service packs beforehand).

    Thanks.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    • Marked as answer by Figo Fei Tuesday, January 20, 2009 4:17 AM
    Monday, January 12, 2009 2:37 AM
  • The log this time shows the problem while installing a Windows Service called: "'Windows Presentation Foundation Font Cache 3.0.0.0":

    MSI (s) (C4:C0) [20:56:06:921]: Product: Microsoft .NET Framework 3.0 Service Pack 2 -- Error 1923. Service 'Windows Presentation Foundation Font Cache 3.0.0.0' (FontCache3.0.0.0) could not be installed.  Verify that you have sufficient privileges to install system services.

    Error 1923. Service 'Windows Presentation Foundation Font Cache 3.0.0.0' (FontCache3.0.0.0) could not be installed.  Verify that you have sufficient privileges to install system services.


    It still complains about the insuffcient privilege to install Windows Service, please check out if any anti-Virus or anti-Spyware blocks this (I've seen several), please add an exception or turn them off, then reboot and try installing again.


    Thanks.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    Tuesday, January 13, 2009 6:15 AM

All replies

  • I ran in Windows Installer debug mode and fixed two permission issues:

    Could not delete value EventMessageFile from key \SYSTEM\CurrentControlSet\Services\Eventlog\Application\CardSpace 3.0.0.0.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.

    Could not delete value Library from key \SYSTEM\CurrentControlSet\Services\SMSvcHost 3.0.0.0\Performance.  System error .  Verify that you have sufficient access to that key, or contact your support personnel.

    I'm still getting errors installing 3.0 SP1.  I found the following warning message in my log files:
    DDSet_Warning: Setup failed to load the DLL at 'C:\Program Files\Common Files\Microsoft Shared\SE\MSG_STD_0_x86_SFI_3_0\worker.dll'. System error: The specified module could not be found.

    Any ideas how to resolve this issue ?

    Tuesday, January 6, 2009 5:27 AM
  • OK, I give up.  I'm the only one replying to my thread.

    If anyone is interested in helping me out with my 3.0 SP1 install error, I have posted my debug log files here:
    http://cid-c1dcd4e980739602.skydrive.live.com/self.aspx/.Public/dd%7C_NET%7C_Framework30%7C_Setup63AF.zip 

    Like I mentioned before, I resolved the two permission issues.
    Tuesday, January 6, 2009 10:14 PM
  • OK, this is the last time I reply to my own thread.  I found the other issue with my 3.0 SP1 install.  I'm getting pretty good at reading the log files now. 

    Installing assembly c:\Program Files\Reference Assemblies\Microsoft\Framework\v3.0\System.ServiceModel.dll
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

    Anyone know how to change permissions or change the attributes on the C:\Program Files\Reference Assemblies folder so I can resolve this issue?
    Wednesday, January 7, 2009 5:17 AM
  • Hi Robert 

    You're using Windows 2003 sp1, right?

    Have you managed to install .NET Framework 3.0 sp1 now?

    As HRESULT 0x80070005 mentioned, you can try using the SubInACL tool to repair file and registry permissions http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx

    If you're still with problems, please use collect tool to collect again: http://blogs.msdn.com/heaths/archive/2008/05/09/visual-studio-and-net-log-collection-utility.aspx.

    Thanks

    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    Wednesday, January 7, 2009 5:37 AM
  •  I'm installing on Windows XP Professional SP3.  I'll try using the SubInACL tool, reinstall 3.0 SP1 again, and if I'm still having issues I'll post my log files.

    Thanks
    Wednesday, January 7, 2009 4:49 PM
  • GOD I love this.  I ran the SubInACL tool and had no problems.  Then to be on the safe side, I uninstalled all versions of frameworks from 1.1 to 3.0 using the .NET Cleanup tool.  I can get 1.1 and 2.0 with all service packs installed fine.  Now when I install 3.0 I get the following access is denied error and I'm logged in under an admin account:

    DDSet_Status: Running Command Line: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe update /queue
    01/07/09 21:39:01 DDSet_Status: LANGID: 1033
    Microsoft (R) CLR Native Image Generator - Version 2.0.50727.1433
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    You must have administrative credentials to perform this task. Contact your system administrator for assistance.

    Any help would be greatly appreciated.

    If and when I get the frameworks installed up to 3.5 SP1, I am never touching them again!!!!!! 

    Thursday, January 8, 2009 9:16 PM
  • If .NET Framework 3.5 sp1 is installed, don't need to worry about .NET 2.0/3.0 and corresponding service packs for them.

    Even if you don't have any previous verison of .NET Framework, .NET 3.5 sp1 can still be installed well, it includes .NET Framework 2.0 sp2 and .NET 3.0 sp2.

    thanks.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    Friday, January 9, 2009 2:48 AM
  • I have framework 1.1, 2.0, and 2.0 SP1 installed.  Your saying that installing framework 3.5 and 3.5 SP1 will install 3.0, 3.0 SP1, 2.0 SP2, 3.0 SP2, and resolve my issue below with intalling 3.0?

    DDSet_Status: Running Command Line: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe update /queue
    01/07/09 21:39:01 DDSet_Status: LANGID: 1033
    Microsoft (R) CLR Native Image Generator - Version 2.0.50727.1433
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    You must have administrative credentials to perform this task. Contact your system administrator for assistance.
      
    Friday, January 9, 2009 3:29 AM
  • FYI:
    Installing .NET Framework 3.5 SP1 can succeed in cases where the .NET Framework 3.0 or 3.5 fail: http://blogs.msdn.com/astebner/archive/2008/12/12/9204257.aspx

    thanks.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    Friday, January 9, 2009 5:08 AM
  •  I have framework 1.1 through 2.0 SP1 installed.  Just to make sure, it seems that installing 3.5 SP1 will resolve all my issues and install 2.0 SP2, 3.0, 3.0 SP1, 3.5, and 3.5 SP1.  Is this correct?  It sounds to good to be true!!!!!
    Friday, January 9, 2009 11:23 PM
  • OK, I've had it.  I tried installing 3.5 SP1 and get the following error in my log files:

    Running Command Line: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe install "mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /NoDependencies /queue:1 /nologo /netfxpri1
    DDSet_Status: LANGID: 1033
    Installing assembly mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    You must have administrative credentials to perform this task. Contact your system administrator for assistance.

    Any ideas were to go from here.  Like I asked in my previous post, I don't think you can install 3.5 SP1 without 3.0 and 3.5 installed.
    Saturday, January 10, 2009 4:28 AM
  • Now I was able to install frameworks 1.1 thorugh 3.0.  I'm still having issues intalling 3.0 SP1 on Windows XP Professional SP3.  Here are the log files using the collect utility.

    http://cid-c1dcd4e980739602.skydrive.live.com/self.aspx/.Public/vslogs.cab


    Can you help me resolve the errors?

     

    Sunday, January 11, 2009 10:59 PM
  • Robert Q. Johnson said:

     I have framework 1.1 through 2.0 SP1 installed.  Just to make sure, it seems that installing 3.5 SP1 will resolve all my issues and install 2.0 SP2, 3.0, 3.0 SP1, 3.5, and 3.5 SP1.  Is this correct?  It sounds to good to be true!!!!!

    No, as I previously said, we don't need to install previous versions of .NET Framework prior to .NET Framework 3.5 sp1, just install .NET Framework 3.5 SP1 alone.

    Unlike service pack for other software, actually .NET Framework service pack is an independent installation.
    One without any previous versions can still directly install .NET Framework 3.5 SP1 (no need to install any of 2.0, 3.0, 3.5 and their service packs beforehand).

    Thanks.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    • Marked as answer by Figo Fei Tuesday, January 20, 2009 4:17 AM
    Monday, January 12, 2009 2:37 AM
  • I tried installing 3.5 SP1 and get the following error in my log files:

    Running Command Line: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe install "mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /NoDependencies /queue:1 /nologo /netfxpri1
    DDSet_Status: LANGID: 1033
    Installing assembly mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    You must have administrative credentials to perform this task. Contact your system administrator for assistance.

    Any ideas were to go from here?
    Monday, January 12, 2009 7:00 PM
  • OK, I have installed frameworks 1.0 through 3.0.  I downloaded the framework 3.5 SP1 install and ran it using my admin account.  I am still getting errors installing framework 3.5 SP1.  Here are the log files:

    http://cid-c1dcd4e980739602.skydrive.live.com/self.aspx/.Public/vslogs.cab

    I would really like to get this issue resolved so I can get VS 2008 intalled by the end of the year!!!!!!!

    Let me know what you find out from looking at the log files.

     

    Tuesday, January 13, 2009 3:29 AM
  • The log this time shows the problem while installing a Windows Service called: "'Windows Presentation Foundation Font Cache 3.0.0.0":

    MSI (s) (C4:C0) [20:56:06:921]: Product: Microsoft .NET Framework 3.0 Service Pack 2 -- Error 1923. Service 'Windows Presentation Foundation Font Cache 3.0.0.0' (FontCache3.0.0.0) could not be installed.  Verify that you have sufficient privileges to install system services.

    Error 1923. Service 'Windows Presentation Foundation Font Cache 3.0.0.0' (FontCache3.0.0.0) could not be installed.  Verify that you have sufficient privileges to install system services.


    It still complains about the insuffcient privilege to install Windows Service, please check out if any anti-Virus or anti-Spyware blocks this (I've seen several), please add an exception or turn them off, then reboot and try installing again.


    Thanks.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help. http://forums.msdn.microsoft.com/en-US/vssetup/thread/60424309-bd78-4ca2-b618-03c4a16123b6
    Tuesday, January 13, 2009 6:15 AM
  • I disabled Antivirus, reran the 3.5 SP1 install, and 2.0 SP2, 3.0 SP2, and 3.5 SP1 all installed successfully.

    THANK YOU VERY MUCH for all your help.

    • Proposed as answer by pkrug Friday, January 30, 2009 2:52 PM
    Wednesday, January 14, 2009 2:47 AM
  • I  had the same problem.   I deactivated virus protection and I was able to successfully install 3.5 sp1.
    Friday, January 30, 2009 2:52 PM