locked
Intel Edison RRS feed

  • Question

  • Are there any plans to support Intel Edison in the future?
    Thursday, April 30, 2015 10:07 PM

Answers

  • The product team is aware of the Intel Edison and I believe it is something they are considering for the future. Nothing has been announced however, and I'm not aware of any specific timeframe.

    I hope this helps.


    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.


    Thursday, April 30, 2015 10:56 PM

All replies

  • The product team is aware of the Intel Edison and I believe it is something they are considering for the future. Nothing has been announced however, and I'm not aware of any specific timeframe.

    I hope this helps.


    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.


    Thursday, April 30, 2015 10:56 PM
  • I'm also very interested in the Edison platform.  It's got some pretty significant advantages over the Pi and other SBCs (power and size, for two), and it's also the platform Intel is moving forward (rather than Galileo), from what I can tell.

    ben

    Friday, May 1, 2015 9:20 PM
  • I would also be very interested in running Windows 10IoT on it. Edison is from a form factor and capability (integrated WIFI, analog Input) point of view very interesting compared to the Raspberrry PI2 or the Galileo

    mikezill

    Thursday, May 14, 2015 8:28 AM
  • Since the Intel Edison is an atom cpu and has 1GB on the SoC, it would seem like a perfect IoT device for WIoTC!

    I would be very interested in Windows IoT Core support for the Edison as well!

    :)

    Thursday, June 4, 2015 3:05 PM
  • Would love to see the Edison supported.

    thx


    -- me --

    Sunday, June 14, 2015 2:45 AM
  • Would love to see Edison Supported...
    Sunday, June 14, 2015 4:42 PM
  • I was looking at Intel's site closer. Are you talking about the mini-breakout or the Arduino Board w/Edison?

    https://software.intel.com/en-us/iot/library/edison-getting-started

    https://software.intel.com/en-us/assembling-intel-edison-board-with-arduino-expansion-board


    Sunday, June 14, 2015 11:16 PM
  • Yes. It would be great if Windows IoT could add support for Intel Edison!

    Thanks.

    Tuesday, June 16, 2015 6:02 PM
  • Yes please support Edison...
    Saturday, July 25, 2015 8:17 PM
  • Would really like to se Windows 10 on edison.

    System Architect

    Wednesday, December 2, 2015 8:34 PM
  • Hi Folks,

    In general, please reach out to the silicon vendor for the BSP kit for their board. The information is available at the link at https://msdn.microsoft.com/en-us/library/windows/hardware/dn916104%28v=vs.85%29.aspx.

    "Generate your own BSP.config.xml by running the BSP kit configuration tools from the SoC vendor and selecting your component drivers."

    Note that you might be able to leverage the Minnow Board Max BSP kit for the Edison but likely you would need to build drivers for the different peripherals on the Edison.

    Sincerely,

    IoTGirl

    Wednesday, December 2, 2015 9:10 PM
  • +1 for getting Windows 10 IoT working on the Intel Edison.

    In particular, I want to work on getting Windows 10 IoT working on the Emlid Reach board (which is an Edison with some extra peripherals): http://www.emlid.com/reach/

     

    If I look at the corresponding discussion on Intel's site (https://communities.intel.com/thread/100886) the official response is just to refer back to Microsoft to get the Windows IoT working on Edison.

    Could you guys please just sort this out together?

     

    -Govert

    Tuesday, April 12, 2016 3:11 PM
  • Hello Govert,

    The answer already given from Intel in the thread you note above is correct.  There was a change made by Intel to the MBM bootloader for it to support Windows 10. From Intel's answer, it is my understanding that Intel would need to make this same change to the Edison Bootloader for a Windows image to load correctly.

    You could certainly try the BSP that Intel has publicly released for the MBM but it is unlikely to have all of the drivers you require for your modified Edison board and you will also likely need the Bootloader change from Inter as well.

    See https://downloadcenter.intel.com/download/25618/Intel-Embedded-Drivers-for-Microsoft-Windows-10-IoT-Core-32-bit-

    Sincerely,

    IoTGirl

    Tuesday, April 12, 2016 4:39 PM