none
CEPC out of the box example wants to boot with KITL RRS feed

  • Question

  • Just trying to get CE8 up and running, followed the example, disabled KITL in my build but when I try to create a CEPC VirtualPC image it keeps wanting to boot with KITL enabled.  What am I doing wrong?

    Is there a better top to bottom example I can follow?  Basically I want a CEPC image, that I can load on a VirtualPC disk and connect to with dev studio, don't want to download an image each time.

    Any help would be greatly appreciated.

    Wednesday, September 18, 2013 12:49 AM

All replies

  • So, how did you disable KITL?

    Are you sure that KITL is connecting?  Or is eboot connecting and downloading the OS?  Or both?


    Bruce Eitman (eMVP)
    Senior Engineer
    Bruce.Eitman AT Eurotech DOT com
    My BLOG http://geekswithblogs.net/bruceeitman

    Eurotech Inc.
    www.Eurotech.com

    Tuesday, September 24, 2013 1:20 PM
    Moderator
  • I used the same procedures for WEC7 and it worked fine. The key is setting up the initial VHD. I used DiskPrep as described in Samuel Phung's blog (Configure Virtual PC to Boot Compact 7 using DiskPrep). Instead of a WEC7 image, I loaded a WEC2013 image.

    Chris

    Als Ik Kan


    • Edited by cpkmpls Friday, September 27, 2013 2:27 PM
    Friday, September 27, 2013 2:27 PM
  • Just getting back to this.  I managed to disable KITL in the initial boot screen (the point where you get 5 seconds to hit space to modify the config); once I did that it was persistent but it's unclear where that setting is stored.  I have this booting but can't do much with it, keyboard support through my attached keyboard doesn't work for a darn.  

    I'll give Samuel's blog a shot.

    Thursday, October 17, 2013 3:51 AM
  • Did you used the vhd located in <WINCE800>\platform\cepc\vm for the VirualPC image? (hd_sample.vhd)

    As I recall there where issues with the keyboard driver if you used the the vhd/vpc from WEC7 loading a wec2013 image,


    -- Good luck, Erwin Zwart--- Check out my blog: http://GuruCE.com/blog https://twitter.com/GuruCE_Embedded GuruCE Microsoft Embedded Partner http://GuruCE.com Consultancy, training and development services.

    Monday, October 21, 2013 11:51 AM
  • Circling back around.

    The keyboard issue seems to be some problem between my remote Win7 box and my Vista box; when I moved it to my local Win7 box the problem went away.  Not sure I understand the problem but it's definitely repeatable; I'm ditching Vista anyway so won't dig any further.

    I used the DiskPrep tool (liked it) and looking at the boot.ini file it seems this could solve some or all of my issues.

    Thanks for the help!

    Steve

    Wednesday, October 30, 2013 12:31 AM