none
Dynamic IPv4 and IPv6 addresses in WEC 2013 RRS feed

  • Question

  • Hi,

    I use an iMX6 with WEC 2013 as a PLC. The bootloader waits 1 second if the counzerpart on the PC is started and wants to update the actual program. If not, the bootloader starts the program and terminates. I use a DS2502+ from MAXIM for a unique MAC. At boot time the address should be 192.168.2.132, to find the microcontroller whatever happend. After the bootloader, this address should be delete, perhaps it could be used in that network and restart an IPv6 local link address generated from the unique MAC. With AddIpAddress and DeleteIpAddress this cannot be done.

    Is there a way to add/remove an IP-address without manipulating the registry, to start with 192.168.2.132 is ok, and without restarting the controller?

    Many thanks for your help.

    Thursday, October 22, 2015 12:56 PM