none
Active sync detection fails sometimes on CE6 RRS feed

  • Question

  • Hi all,

     

    i am using wince6 and OMAP35xx. I am facing issue with active sync The issue is this :

     

    Normally active sync working but some times if i try to connect it connects but i cant Explore the files and folders

    In the log i can see this :

    RASCS_Disconnected: Ecode=679
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 679(0x2A7)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    Posting WM_NETCONNECT(TRUE) message
    AUTORAS:: Dialer notifies: [4] [Dialer Connected]

     

    Sometimes If i try to connect it connects but disconnects within few second with no error message, then i have to restart the device in order to make the connection possible

     

    Sometimes if i try to connect, it didnt connect at all and i get the following error message:

    UsbFnMdd!UfnMdd_Notify: Ignoring notification 0x00000001 - 0x00000000 from PDD

    Checking if extended keep alive timeouts feature is set...No
    CeLog Zones : CE = 0xCFBFDFFF, User = 0xFFFFFFFF, Proc = 0xFFFFFFFF
    Checking if extended keep alive timeouts feature is set...No
    Checking if extended keep alive timeouts feature is set...No
                                                               
    RASCS_Disconnected: Ecode=679
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 679(0x2A7)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d68
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d68
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d68
    RASCS_Disconnected: Ecode=619
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cf8
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cf8
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cf8
    RASCS_Disconnected: Ecode=619
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    kernel IOCTL_POWER_SET setting state 0
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d30
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d30
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3d30
    RASCS_Disconnected: Ecode=619
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    kernel IOCTL_POWER_SET setting state 1
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cc0
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cc0
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3cc0
    RASCS_Disconnected: Ecode=619
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]
    AUTORAS:: Dialer notifies: [1] [Dialer Start]
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3da0
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3da0
    UsbFnMdd!CPipeBase::IssueTransfer: Could not start transfer 0xd42a3da0
    RASCS_Disconnected: Ecode=619
    Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B)
    AUTORAS:: Dialer notifies: [2] [Dialer Terminate]

     

    Then i have to restart the device to make the connection working.

     

    Please share your experience and thought.

     

    Regards,

    Misbah

    Tuesday, February 8, 2011 11:20 AM

All replies