none
dbase importieren mit SSIS 2008 auf 64-Bit RRS feed

  • Frage

  • Hallo,

    ich habe einen SQLS 2008 auf einem Win2003-Server 64-Bit. Ich muss täglich Daten aus dbase-Tabellen importieren, was auf dem SQLS2000 mit dts gut geklappt hat. Nach der Umstellung auf SQLS2008 habe ich es mit SSIS probiert und komme nicht weiter. Ich habe bereits in den Newsgroups gelesen, dass SSIS 2008 auch mit dem OLE DB 4.0 Treiber zurechtkommt, aber angeblich nur auf 32-Bit Systemen. Es gibt auch unterschiedliche Tipps dazu, wie das dann doch auf 64-Bit geht, aber ich habe keinen so richtig verstanden. Darum noch mal die Frage mit der Hoffnung auf eine leicht verständliche Antwort ;-) : Wie bringe ich am einfachsten und schnellsten mein SSIS auf dem 64-Bit-System dazu, dass es auf dbase zugreift?

    Vielen Dank im voraus und herzliche Grüße

    Andreas

    Samstag, 4. Juni 2011 10:00

Antworten

  • (Apologies in advance for the poor translation - English response follows.)

    SSIS in 64-Bit ausgeführt können nicht 32-Bit-Treiber verwenden. Wenn Sie nur 32-Bit-Treiber verfügen, müssen Sie zwingen, SSIS in 32-Bit ausgeführt werden. In 2008 ist es ein Kontrollkästchen "ausführen im 32-Bit-Modus" in den SQL-Agent-Auftragsschritt-Eigenschaften. Zur verwenden können verfügen, die 64-Bit-Installation von SQL Server muss die vollständige Verwaltungstools oder Gebote installiert. Wenn Sie eine dieser Optionen in Ihrer Installation ausgewählt haben, ein 32-Bit-Satz der Werkzeuge wird nicht installiert wurden, und SSIS wird nur im 64-Bit-Modus ausgeführt. Lesen Sie für weitere Informationen und Links diesen Artikel.

    SSIS running in 64-bit can't use 32-bit drivers.  If you only have 32-bit drivers, you need to force SSIS to run in 32-bits.  In 2008, there is a "run in 32-bit mode" checkbox in the SQL Agent Job Step properties.  In order to be able to use that, your 64-bit installation of SQL Server MUST have the Full Management Tools or BIDS installed.  If you don't have either of those options selected in your installation, the 32-bit set of tools will not have been installed, and SSIS will only run in 64-bit mode.  For more information and links, see this article.


    Todd McDermid's Blog Talk to me now on
    Samstag, 4. Juni 2011 15:33

Alle Antworten

  • (Apologies in advance for the poor translation - English response follows.)

    SSIS in 64-Bit ausgeführt können nicht 32-Bit-Treiber verwenden. Wenn Sie nur 32-Bit-Treiber verfügen, müssen Sie zwingen, SSIS in 32-Bit ausgeführt werden. In 2008 ist es ein Kontrollkästchen "ausführen im 32-Bit-Modus" in den SQL-Agent-Auftragsschritt-Eigenschaften. Zur verwenden können verfügen, die 64-Bit-Installation von SQL Server muss die vollständige Verwaltungstools oder Gebote installiert. Wenn Sie eine dieser Optionen in Ihrer Installation ausgewählt haben, ein 32-Bit-Satz der Werkzeuge wird nicht installiert wurden, und SSIS wird nur im 64-Bit-Modus ausgeführt. Lesen Sie für weitere Informationen und Links diesen Artikel.

    SSIS running in 64-bit can't use 32-bit drivers.  If you only have 32-bit drivers, you need to force SSIS to run in 32-bits.  In 2008, there is a "run in 32-bit mode" checkbox in the SQL Agent Job Step properties.  In order to be able to use that, your 64-bit installation of SQL Server MUST have the Full Management Tools or BIDS installed.  If you don't have either of those options selected in your installation, the 32-bit set of tools will not have been installed, and SSIS will only run in 64-bit mode.  For more information and links, see this article.


    Todd McDermid's Blog Talk to me now on
    Samstag, 4. Juni 2011 15:33
  • That works fine, thanks a lot.

    Kind regards

    Andreas

    Montag, 6. Juni 2011 06:53