none
Stereoscopic 3D sample not working on Stereo 3D hardware

    שאלה

  • I am wondering if anyone has got the stereoscopic 3d sample app working in stereo 3d mode. When I run the app on our system with 3D hardware (all nvidia 3d vision approved) it won't go into Stereoscopic 3D mode. DirectX returns false when asked if Stereo 3D is supported (IsWindowedStereoEnabled returns false).

    Cheers,
    Maurice

    יום שלישי 21 פברואר 2012 08:30

כל התגובות

  • Hi Maurice,

    It works in general. Do other 3D apps work for you? If IsWindowedStereoEnabled returns false then it sounds like the system isn't fully set up for 3D.

    --Rob

    יום רביעי 22 פברואר 2012 16:48
    בעלים
  • Hi Rob,

    It's complicated :)

    Using the latest nVidia drivers and Vision software most Vision demos work, but only in full screen. However I learned that for DirectX to support Stereo 3D you need the WDDM 1.2 driver. When using those all nVidia apps stop working correctly. E.g. the nVidia control panel doesn't even startup. The odd thing now is that using the 1.2 driver IsWindowStereoEnabled does return true, but the hardware doesn't pick it up. Also when running the Unigine benchmark (http://unigine.com/) it abort with an error saying that the driver can't set the 3d mode in hardware.

    Cheers,
    Maurice


    יום רביעי 22 פברואר 2012 19:41
  • The Unigine Benchmark is not using DirectX 11.1 (yet). It's using the DirectX 11.0 API and then using some NVIDIA-speciifc API to enable stereo which is likely not supported by the WDDM 1.2 driver.

    Try building and running this sample app on a system with a WDDM 1.2 driver

    http://code.msdn.microsoft.com/windowsapps/Direct3D-111-Simple-Stereo-9b2b61aa


    יום שישי 24 פברואר 2012 02:06
  • I see. The Unigine is then not a good test for now :)

    However, that sample you are talking is the sample I mean in both my posts. 

    יום שישי 24 פברואר 2012 11:40
  • Hi Maurice,

    I installed yesterdays NVidia W8 driver update (notebook version) from the NVidia site and the stereoscopic 3D sample app now works with NVidia 3D vision (previous update gave IsWindowedStereoEnabled false as you mentioned).  Not 100% this driver, I've lost video out entirely on one or two occasions. Also their 3D Vision Photo Viewer desktop app doesn't show stereo 3D in windowed mode, only full screen. Still, a step forward.

    Bob

    יום חמישי 15 מרץ 2012 01:16
  • Bumping the thread.

    On the Win8 x64 Consumer Preview with WDDM 1.2 driver & Nvidia 3D Vision, I am seeing two bad behaviors with the Stereoscopic 3D Sample app.

    Note that I have confirmed Stereoscopic 3D with the manufacturer-provided "GeForce 3D Vision Experience" video and slideshow.

    1)  The app will not render frames unless it is out of focus.  This is achieved by putting the mouse cursor into the extreme of any corner to invoke either a task-switch preview (of the desktop or Charm bar).

    2) While the app is out of focus and rendering frames, there is no 3D involved in the sample.

    Card:
    Nvidia GeForce GTX 570
    Driver Version:  9.18.12.9617
    Driver Model:  WDDM 1.2

    • הוצע כתשובה על-ידי Taygee יום שלישי 17 אפריל 2012 19:56
    • הצעה כתשובה בוטלה על-ידי Taygee יום שלישי 17 אפריל 2012 19:56
    יום שלישי 17 אפריל 2012 15:59