none
TFS: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

Answers

  • Hi Vijay, 

    Thanks for your reply.

    Yes, we suggest you re-install your TFS Build Service. 

    Or before uninstall this current Build Service, you can install another new TFS Build Service, then test this scenario on the new Build Controller.   


    John Qiao [MSFT]
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Friday, October 04, 2013 2:43 AM

All replies

  • Hi,

    Thanks for your post.

    I'd like to confirm with you did you restart the computer after you apply this hotfix? It's a necessary step.

    Maybe you can try to use the initial workarounds that list in the blog:

    • Open the IIS Manager
    • In the Connections pane, make sure the name of your AT is selected.
    • In the middle pane (titled “<MachineName> Home”), make sure you are in the “Features View” (bottom) and scroll down to the Management section.
    • Double-click the “Configuration Editor” icon.
    • The middle pane should now have the title “Configuration Editor”.  In the Section pull down near the top, expand the system.applicationHost and select “webLimits”.
    • You should now see a bunch of property value pairs, one of which is named “minBytesPerSecond”.  Its value is most like 240.  You will want to lower this value for the workaround. 

    In addition, could you also share us the server environment you are using? And please check Event Log in Event Viewer to see if there is anything helpful.

    Best regards,

    Cece


    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Friday, September 27, 2013 8:52 AM
  • Hi,

    Thanks for the reply.  Should this hotfix be installed on the TFS Server?

    Regards,

    Vijay

    • Edited by kvk1985 Friday, September 27, 2013 11:48 AM
    Friday, September 27, 2013 11:48 AM
  • Hi Vijay, 

    Thanks for your post.

    Yes, you will need to install it on all of your ATs.

    Before install that hotfix, I suggest you upgrade your TFS 2010 to TFS 2010 SP1 first, also upgrade your VS 2010 to VS 2010 SP1.


    John Qiao [MSFT]
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Monday, September 30, 2013 7:32 AM
  • Hi,

    We checked that our TFS Server machine has TFS 2010 SP1 and our build machine has TFS 2010 SP1 and VS 2012.

    We are still seeing the issue.

    Regards,

    Vijay

    • Edited by kvk1985 Tuesday, October 01, 2013 7:13 PM
    Tuesday, October 01, 2013 7:13 PM
  • Hi Vijay,  

    Thanks for your reply.

    This issue happened when you configure/edit build definition or this issue happened during ran that build definition? If it happened during run build definition, please share the detailed TFS build log here. 

    You build definition use the default TFS 2010 build process template and this issue happened in all your build definitions?

    Your build definitions worked fine before? If yes, do you know which detailed operation caused this issue?

    If this’s only issue in your TFS build feature, I suggest you install a new TFS Build Service for your TFS 2010 Server, then test run build definition on the new TFS Build Service. 


    John Qiao [MSFT]
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Wednesday, October 02, 2013 5:43 AM
  • Hi,

    We have just started the process of using TFS Build definitions.  We only have one TFS Build definition at this point.  We will have more in the future.

    We used the default TFS 2010 build process template.  The issue is seen when getting files from TFS whose size is more than 2 MB.

    Below is the build log -

    "Update Build Number

    05:30
    Run On Agent (reserved build agent SPMBuildW7 - Agent1)

    00:00
    Delete Test Results Directory

    00:00
    Delete Binaries Directory

    00:00
    Delete Workspace

    00:00
    Delete Sources Directory

    00:00
    Create Workspace

    05:15
    Get Workspace
     D:\Sources\Externals\IGC\Net_It\MSI_Files\IGC_Writer_5.0_x32_TS.msi: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\IGC\Net_It\MSI_Files\NetItEnterprise7.0.1.22.msi: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\IGC\XRef\Dwg2DL.dll: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\Leica TruView\Leica 3.1.0.0\TruViewApiPackage\TruViewApiPackage\TruView-GeoTags\Station-002_ SW-001\Pnt_2_1024.DAT: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\Leica TruView\Leica 3.1.0.0\TruViewApiPackage\TruViewApiPackage\TruView-GeoTags\Station1.ptx\Pnt_0_1024.DAT: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\RAD\Controls\converter\EXPRDCX.DLL: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\RAD\rvc.zip: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\Externals\RASTER\Controls\jengine.dll: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\INSTALL\Required Software\Net Framework\4.0\dotNetFx40_Full_x86_x64.exe: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     D:\Sources\INSTALL\Required Software\Net Framework\3.5\dotnetfx35.exe: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
     One or more errors occurred while performing a Get operation.

    Do you still want us to re-install the TFS Build Service?

    Regards,

    Vijay


    • Edited by kvk1985 Wednesday, October 02, 2013 1:43 PM
    Wednesday, October 02, 2013 1:30 PM
  • Hi Vijay,  

    Thanks for your reply.

    If you manually get that .msi and dll files from your TFS Source Control to local working folder on build agent machine, will receive the same error or can get the source files correctly?

    Yes, if installed that hotfix still can’t resolve this issue, we suggest you re-install your Build Service.


    John Qiao [MSFT]
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Thursday, October 03, 2013 2:36 AM
  • Hi John,

    The issue is not seen when getting the files manually.

    Should we re-install the TFS Build Service?  Just want to confirm once before we do it.

    Regards,

    Vijay

    • Edited by kvk1985 Thursday, October 03, 2013 2:48 PM
    Thursday, October 03, 2013 2:48 PM
  • Hi Vijay, 

    Thanks for your reply.

    Yes, we suggest you re-install your TFS Build Service. 

    Or before uninstall this current Build Service, you can install another new TFS Build Service, then test this scenario on the new Build Controller.   


    John Qiao [MSFT]
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support

    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

    Friday, October 04, 2013 2:43 AM
  • OK.

    We will install a second Build Controller and check it.

    Regards,

    kvk

    • Edited by kvk1985 Friday, October 04, 2013 3:43 PM
    Friday, October 04, 2013 3:41 PM
  • Hi John,

    After installing the Build Controller and Build Agent on a new VM, the issue is not seen.

    Regards,

    kvk1985


    • Edited by kvk1985 Wednesday, October 16, 2013 2:48 PM
    Wednesday, October 16, 2013 2:47 PM